Effect of substrate temperature on fluorine doped tin oxide thin films (FTO) by chemical spray pyrolysis method

2019 ◽  
Author(s):  
Ebitha Eqbal ◽  
E. I. Anila
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Spray Pyrolysis ◽  
Tin Oxide ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
Oxide Thin Films ◽  
Pyrolysis Method ◽  
Chemical Spray

Optoelectronic Properties of Fluorine and Cobalt Co-Doped Tin Oxide Thin Films Deposited by Chemical Spray Pyrolysis

2019 ◽  
Vol 60 ◽  
pp. 63-75 ◽  
Author(s):  
Naoual Houaidji ◽  
Mejda Ajili ◽  
Baghdadi Chouial ◽  
Najoua Turki Kamoun ◽  
Kenza Kamli ◽  
...  
Keyword(s):  
Thin Films ◽  
Spray Pyrolysis ◽  
Carrier Concentration ◽  
Tin Oxide ◽  
Hall Mobility ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
Glass Substrates ◽  
Chemical Spray ◽  
Co Doped

Transparent conducting Cobalt-fluorine co-doped tin oxide (SnO2: (Co, F)) thin filmswere deposited onto preheated glass substrates using the chemical spray pyrolysis method. The ([Co2+]/[Sn4+]) atomic concentration ratio (y)in the spray solution was varied between 0 and 5 at. %. The structural, electrical, optical and photoluminescence properties of these films were studied. It is found that the thin films are polycrystalline with a tetragonal crystal structure corresponding to SnO2 phase having a preferred orientation along the (200) plane. Transmission and reflection spectra reveal the presence of interference fringes indicating thickness uniformity and surface homogeneity of the deposited thin films. The electrical resistivity (ρ), volume carrier concentration density (Nv), surface carrier concentration density (Ns) and Hall mobility (μ) of the synthesized thin films were determined from the Hall Effect measurements in the Van der Paw-configuration and the following results were obtained: n-type conductivity in all deposited films, a low resistivity of 1.16×10-2 Ω.cm, and a high Hall mobility of 15.13×102 cm2.V-1.s-1with Co concentration equals to 3 at. %. These results show that the electrical properties of these thin films where greatly improved making them suitable as ohmic contact in photovoltaic application devices.

Sign in / Sign up

Export Citation Format

Share Document