scholarly journals Study of heat transfer in a water cooling tank with c-shaped heat exchanger and straight heat pipe under natural circulation

2019 ◽  
Author(s):  
Anhar R. Antariksawan ◽  
Mulya Juarsa ◽  
Titik Sundari ◽  
Sri Ismarwanti ◽  
Surip Widodo ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Pipe ◽  
Natural Circulation ◽  
Water Cooling

scholarly journals Thermal Characteristics Analysis on Multi- Heat Pipe Induced Heat Exchanger

2019 ◽  
Vol 9 (2S2) ◽  
pp. 143-147 ◽  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Pipe ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Cold Water ◽  
Hot Water ◽  
Working Fluid ◽  
Physical Parameters

In this investigation of multi heat pipe induced in heat exchanger shows the developments in heat transfer is to improve the efficiency of heat exchangers. Water is used as a heat transfer fluid and acetone is used as a working fluid. Rotameter is set to measure the flow rate of cold water and hot water. To maintain the parameter as experimental setup. Then set the mass flow rate of hot water as 40 LPH, 60LPH, 80 LPH, 100LPH, 120 LPH and mass flow rate of cold water as 20 LPH, 30 LPH, 40 LPH, 50 LPH, and 60 LPH. Then 40 C, 45 ºC, 50 ºC, 55 C, 60 ºC are the temperatures of hot water at inlet are maintained. To find some various physical parameters of Qc , hc , Re ,, Pr , Rth. The maximum effectiveness of the investigation obtained from condition of Thi 60 C, Tci 32 C and 100 LPH mhi, 60 LPH mci the maximum effectiveness attained as 57.25. Then the mhi as 100 LPH, mci as 60 LPH and Thi at 40 C as 37.6%. It shows the effectiveness get increased about 34.3 to the maximum conditions.

Analysis of Heat Transfer and Flow Characteristics of AP1000 Passive Residual Heat Removal Heat Exchanger

2014 ◽  
Author(s):  
Xu Xie ◽  
Changhua Nie ◽  
Li Zhan ◽  
Hua Zheng ◽  
Pengzhou Li ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Temperature Difference ◽  
Tube Bundle ◽  
Natural Circulation ◽  
Heat Removal ◽  
Large Temperature ◽  
Water Tank ◽  
Secondary Side ◽  
Residual Heat

In this paper, the computational fluid dynamics (CFD) method is applied to the thermal-hydraulic analysis, while the porous media model is used to simplify AP1000 passive residual heat removal heat exchanger tube. The temperature as well as flow distribution in the secondary side of the heat exchanger are obtained, aiming at analysis of natural circulation ability. It can be noted that the fluid in the secondary side of heat exchanger moves driven by the effect of thermal buoyancy, forming the natural cycle, which takes away heat in tube bundle region. The heat transfer in water tank is mainly enhanced by vortex and turbulent flow, caused by the large resistance of tube bundle region as well as large temperature difference. This phenomenon is obvious especially for the recirculation of flow near the tube bundle. The enduring change of flow rate and direction enhance the heat transfer. Besides, the big temperature difference helps to increase the driving effect of natural circulation. Consequently, the heat transfer of the tank is enhanced by above mechanism. The results of this study contribute to the capacity analysis of passive residual heat removal of natural circulation system, providing valuable information for safe operation of AP1000.

scholarly journals An Experimental Research of Natural Circulation Heat Transfer for PRHR Heat Exchanger in AP1000

2016 ◽  
Vol 10 (9) ◽  
Author(s):  
Minghui Duan ◽  
Yuzhou Chen ◽  
Yvfeng Lv ◽  
Weiqing Li ◽  
Keming Bi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Experimental Research ◽  
Natural Circulation

scholarly journals Thermal Performance and Energy Saving Analysis of Indoor Air–Water Heat Exchanger Based on Micro Heat Pipe Array for Data Center

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 393 ◽  
Author(s):  
Heran Jing ◽  
Zhenhua Quan ◽  
Yaohua Zhao ◽  
Lincheng Wang ◽  
Ruyang Ren ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Energy Saving ◽  
Heat Pipe ◽  
Flow Rate ◽  
Data Center ◽  
Data Centers ◽  
Air Flow ◽  
Air Flow Rate ◽  
Cold Energy

According to the temperature regulations and high energy consumption of air conditioning (AC) system in data centers (DCs), natural cold energy becomes the focus of energy saving in data center in winter and transition season. A new type of air–water heat exchanger (AWHE) for the indoor side of DCs was designed to use natural cold energy in order to reduce the power consumption of AC. The AWHE applied micro-heat pipe arrays (MHPAs) with serrated fins on its surface to enhance heat transfer. The performance of MHPA-AWHE for different inlet water temperatures, water and air flow rates was investigated, respectively. The results showed that the maximum efficiency of the heat exchanger was 81.4% by using the effectiveness number of transfer units (ε-NTU) method. When the max air flow rate was 3000 m3/h and the water inlet temperature was 5 °C, the maximum heat transfer rate was 9.29 kW. The maximum pressure drop of the air side and water side were 339.8 Pa and 8.86 kPa, respectively. The comprehensive evaluation index j/f1/2 of the MHPA-AWHE increased by 10.8% compared to the plate–fin heat exchanger with louvered fins. The energy saving characteristics of an example DCs in Beijing was analyzed, and when the air flow rate was 2500 m3/h and the number of MHPA-AWHE modules was five, the minimum payback period of the MHPA-AWHE system was 2.3 years, which was the shortest and the most economical recorded. The maximum comprehensive energy efficiency ratio (EER) of the system after the transformation was 21.8, the electric power reduced by 28.3% compared to the system before the transformation, and the control strategy was carried out. The comprehensive performance provides a reference for MHPA-AWHE application in data centers.

Sign in / Sign up

Export Citation Format

Share Document