Evaluation of mechanical properties in date palm fronds polymer composites

2019 ◽  
Author(s):  
S. Raghavendra ◽  
G. N. Lokesh
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Date Palm ◽  
Palm Fronds

scholarly journals Characterization of Mechanical Properties of Aligned Date Palm Frond Fiber-Reinforced Low Density Polyethylene

2017 ◽  
Vol 14 (2) ◽  
pp. 115 ◽  
Author(s):  
Khaled AlZebdeh ◽  
M. M. Nassar ◽  
M.A. Al-Hadhrami ◽  
O. Al-Aamri ◽  
S. Al-Defaai ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Date Palm ◽  
Testing Machine ◽  
Natural Fibers ◽  
Real Life ◽  
Tensile Load ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Surrounding Matrix ◽  
Palm Fronds

In recent decades, natural fibers have received attention of scientists and researchers due to their ecofriendly characteristics that qualify them as potential reinforcement in polymer composites in place of synthetic fibers.  In this study, an experimental investigation has been conducted to evaluate the effect of orientation of fibers on mechanical properties of a newly developed bio-composite in which date palm fronds (DPF) are embedded as fibers in low-density polyethylene (LDPE) matrix. Three bio-composite sheets with orientations of 0°, 45° and 90°, respectively have been fabricated after the date palm fronds were chemically treated. The fabricated composite specimens are tested under tensile load using Universal Testing Machine (UTM) in accordance with the ASTM D-638 standard. Then, a comparison of the experimental results against analytical results is made to examine the accuracy and agreement between the two. An inconsistency in moduli, as was discovered, is attributed to the adhesion quality between the fibers and surrounding matrix. Output results help to assess the applicability of such class of bio-composites in real-life applications.  The results of tensile strength, Young’s modulus, and elongation at break revealed that date palm fronds can be used as reinforcement material in polymer-based composites for low strength applications.  

A Study of Some Mechanical and Physical Properties for Palm Fiber/Polyester Composite

2020 ◽  
Vol 38 (3B) ◽  
pp. 104-114
Author(s):  
Samah M. Hussein
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Dielectric Constant ◽  
Date Palm ◽  
Volume Fraction ◽  
Unsaturated Polyester ◽  
Dielectric Strength ◽  
Palm Fiber ◽  
Mechanical And Physical Properties ◽  
Polyester Composite

This research has been done by reinforcing the matrix (unsaturated polyester) resin with natural material (date palm fiber (DPF)). The fibers were exposure to alkali treatment before reinforcement. The samples have been prepared by using hand lay-up technique with fiber volume fraction of (10%, 20% and 30%). After preparation of the mechanical and physical properties have been studied such as, compression, flexural, impact strength, thermal conductivity, Dielectric constant and dielectric strength. The polyester composite reinforced with date palm fiber at volume fraction (10% and 20%) has good mechanical properties rather than pure unsaturated polyester material, while the composite reinforced with 30% Vf present poor mechanical properties. Thermal conductivity results indicated insulator composite behavior. The effect of present fiber polar group induces of decreasing in dielectric strength, and increasing dielectric constant. The reinforcement composite 20% Vf showed the best results in mechanical, thermal and electrical properties.

Investigation of Chemical, Physical and Mechanical Properties of Algerian Date Palm Wood

2014 ◽  
Vol 56 (3) ◽  
pp. 236-240
Author(s):  
Siham Amirou ◽  
Abdellatif Zerizer ◽  
Antonio Pizzi
Keyword(s):  
Mechanical Properties ◽  
Date Palm ◽  
Physical And Mechanical Properties

How the work of adhesion affects the mechanical properties of silica-filled polymer composites

1994 ◽  
Vol 29 (9) ◽  
pp. 2406-2416 ◽  
Author(s):  
S. W. Shang ◽  
J. W. Williams ◽  
K. -J. M. Söderholm
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Work Of Adhesion ◽  
Filled Polymer

scholarly journals A Review on Mechanical Properties of Natural Fibre Reinforced Polymer Composites under Various Strain Rates

2021 ◽  
Vol 5 (5) ◽  
pp. 130
Author(s):  
Tan Ke Khieng ◽  
Sujan Debnath ◽  
Ernest Ting Chaw Liang ◽  
Mahmood Anwar ◽  
Alokesh Pramanik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Polymer Composites ◽  
Stress Transfer ◽  
Natural Fibre ◽  
Transfer Efficiency ◽  
Strain Rates ◽  
Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Fibre Matrix

With the lightning speed of technological evolution, the demand for high performance yet sustainable natural fibres reinforced polymer composites (NFPCs) are rising. Especially a mechanically competent NFPCs under various loading conditions are growing day by day. However, the polymers mechanical properties are strain-rate dependent due to their viscoelastic nature. Especially for natural fibre reinforced polymer composites (NFPCs) which the involvement of filler has caused rather complex failure mechanisms under different strain rates. Moreover, some uneven micro-sized natural fibres such as bagasse, coir and wood were found often resulting in micro-cracks and voids formation in composites. This paper provides an overview of recent research on the mechanical properties of NFPCs under various loading conditions-different form (tensile, compression, bending) and different strain rates. The literature on characterisation techniques toward different strain rates, composite failure behaviours and current challenges are summarised which have led to the notion of future study trend. The strength of NFPCs is generally found grow proportionally with the strain rate up to a certain degree depending on the fibre-matrix stress-transfer efficiency. The failure modes such as embrittlement and fibre-matrix debonding were often encountered at higher strain rates. The natural filler properties, amount, sizes and polymer matrix types are found to be few key factors affecting the performances of composites under various strain rates whereby optimally adjust these factors could maximise the fibre-matrix stress-transfer efficiency and led to performance increases under various loading strain rates.

scholarly journals Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1468
Author(s):  
Ummu Raihanah Hashim ◽  
Aidah Jumahat ◽  
Mohammad Jawaid
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Glass Fibre ◽  
Graphene Nanosheets ◽  
High Surface ◽  
High Surface Area ◽  
High Strength ◽  
Basalt Fibre ◽  
Graphene Nanoplatelet ◽  
Dispersion State

Basalt fibre (BF) is one of the most promising reinforcing natural materials for polymer composites that could replace the usage of glass fibre due to its comparable properties. The aim of adding nanofiller in polymer composites is to enhance the mechanical properties of the composites. In theory, the incorporation of high strength and stiffness nanofiller, namely graphene nanoplatelet (GNP), could create superior composite properties. However, the main challenges of incorporating this nanofiller are its poor dispersion state and aggregation in epoxy due to its high surface area and strong Van der Waals forces in between graphene sheets. In this study, we used one of the effective methods of functionalization to improve graphene’s dispersion and also introducing nanosilica filler to enhance platelets shear mechanism. The high dispersive silica nanospheres were introduced in the tactoids morphology of stacked graphene nanosheets in order to produce high shear forces during milling and exfoliate the GNP. The hybrid nanofiller modified epoxy polymers were impregnated into BF to evaluate the mechanical properties of the basalt fibre reinforced polymeric (BFRP) system under tensile, compression, flexural, and drop-weight impact tests. In response to the synergistic effect of zero-dimensional nanosilica and two-dimensional graphene nanoplatelets enhanced the mechanical properties of BFRP, especially in Basalt fibre + 0.2 wt% GNP/15 wt% NS (BF-H0.2) with the highest increment in modulus and strength to compare with unmodified BF. These findings also revealed that the incorporation of hybrid nanofiller contributed to the improvement in the mechanical properties of the composite. BF has huge potential as an alternative to the synthetic glass fibre for the fabrication of mechanical components and structures.

Effect of chitosan/modified montmorillonite coating on the antibacterial and mechanical properties of date palm fiber trays

2020 ◽  
Vol 148 ◽  
pp. 316-323
Author(s):  
Fatima-Zahra Semlali Aouragh Hassani ◽  
Khadija El Bourakadi ◽  
Nawal Merghoub ◽  
Abou el kacem Qaiss ◽  
Rachid Bouhfid
Keyword(s):  
Mechanical Properties ◽  
Date Palm ◽  
Palm Fiber ◽  
Modified Montmorillonite
Sign in / Sign up

Export Citation Format

Share Document