scholarly journals Characterization of polyamide 6 - polypropylene laminates

2019 ◽  
Author(s):  
Judith R. Büttler ◽  
Tung Pham
Keyword(s):  
Polyamide 6

scholarly journals Thermal and Quasi-Static Mechanical Characterization of Polyamide 6-Graphene Nanoplatelets Composites

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1454
Author(s):  
Pietro Russo ◽  
Francesca Cimino ◽  
Antonio Tufano ◽  
Francesco Fabbrocino
Keyword(s):  
Chemical Resistance ◽  
Experimental Tests ◽  
Polyamide 6 ◽  
Graphene Nanoplatelets ◽  
Strength Parameter ◽  
Melt Compounding ◽  
Static Mechanical ◽  
Thermal And Electrical Properties ◽  
Multifunctional Products

The growing demand for lightweight and multifunctional products in numerous industrial fields has recently fuelled a growing interest in the development of materials based on polymer matrices including graphene-like particles, intrinsically characterized by outstanding mechanical, thermal, and electrical properties. Specifically, with regard to one of the main mass sectors, which is the automotive, there has been a significant increase in the use of reinforced polyamides for underhood applications and fuel systems thanks to their thermal and chemical resistance. In this frame, polyamide 6 (PA6) composites filled with graphene nanoplatelets (GNPs) were obtained by melt-compounding and compared in terms of thermal and mechanical properties with the neat matrix processed under the same condition. The results of the experimental tests have shown that the formulations studied so far offer slight improvements in terms of thermal stability but much more appreciable benefits regarding both tensile and flexural parameters with respect to the reference material. Among these effects, the influence of the filler content on the strength parameter is noteworthy. However, the predictable worsening of the graphene sheet dispersion for GNPs contents greater than 3%, as witnessed by scanning electron images of the tensile fractured sections of specimens, affected the ultimate performance of the more concentrated formulation.

scholarly journals Comparison characterization of copper selenide thin layers prepared on polyamide 6 films by sorption-diffusion method

2013 ◽  
Vol 11 (4) ◽  
pp. 636-643 ◽  
Author(s):  
Remigijus Ivanauskas ◽  
Vitalijus Janickis ◽  
Vitalija Jasulaitienė
Keyword(s):  
Phase Composition ◽  
Polyamide 6 ◽  
Copper Selenide ◽  
Thin Layers ◽  
Diffusion Method ◽  
Two Phases ◽  
Xrd Patterns ◽  
Sem Studies

AbstractSome earlier synthesized copper selenide (Cux Se) layers formed on the surface of polyamide 6 by sorption-diffusion method using potassium selenotrithionate (K2SeS2O6) as precursor of selenium were characterized by the XRD, XPS and SEM methods. According to the results of the SEM studies, the most uniform Cux Se layers form at the 2.5 h polyamide seleniumized duration at the temperature of 60°C. The thickness of layers, which dependeds on the duration of seleniumization, changed in the range of 0.8–3.2 µm. The XRD patterns of not previously studied Cux Se layers showed their phase composition of six copper selenides: Cu2Se, two phases of CuSe2, Cu3Se2, berzellianite, Cu2-x Se, and bellidoite Cu2Se. Analysis of the XRD and XPS data shows that the macrostructure and composition of the CuxSe layers depend on the conditions of formation of these layers.

Characterization of HDPE /Polyamide 6/ Nanocomposites Using Scanning-and Transmission Electron Microscopy

2007 ◽  
Vol 258 (1) ◽  
pp. 82-89 ◽  
Author(s):  
Eleonora Erdmann ◽  
Marcos L. Dias ◽  
Victor J. R. R. Pita ◽  
Hugo Destéfanis ◽  
Fernanda Monasterio ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Polyamide 6 ◽  
Transmission Electron

Preparation and characterization of titanate-modified Boehmite–polyamide-6 nanocomposites

Polymer ◽  
2005 ◽  
Vol 46 (16) ◽  
pp. 6025-6034 ◽  
Author(s):  
Ceren Özdilek ◽  
Krzysztof Kazimierczak ◽  
Stephen J. Picken
Keyword(s):  
Polyamide 6

Synthesis and characterization of multi-walled carbon nanotubes reinforced polyamide 6 via in situ polymerization

Polymer ◽  
2005 ◽  
Vol 46 (14) ◽  
pp. 5125-5132 ◽  
Author(s):  
Chungui Zhao ◽  
Guanjun Hu ◽  
Ryan Justice ◽  
Dale W. Schaefer ◽  
Shimin Zhang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
In Situ Polymerization ◽  
Polyamide 6 ◽  
Synthesis And Characterization ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Preparation and Characterization of Composite of Polyamide 6/Nickel Ferrite

2012 ◽  
Vol 727-728 ◽  
pp. 609-613
Author(s):  
P.C.F. Menezes ◽  
Taciana Regina de Gouveia Silva ◽  
Ana Cristina Figueiredo de Melo Costa ◽  
Edcleide Maria Araújo
Keyword(s):  
Thermal Stability ◽  
Nickel Ferrite ◽  
Polyamide 6 ◽  
Hydraulic Press ◽  
Good Dispersion ◽  
Distributed Load ◽  
Physico Chemical ◽  
The Matrix ◽  
Thermal Stability Of

The research in composites attempt to predict the physico-chemical and mechanical a given mixture of materials. In this work, a composite was produced using as the polyamide 6 matrix and how the burden of nickel ferrite was incorporated as powders calcined at 1200°C and concentration of 50 wt.%. This mixture was compacted in a hydraulic press with heating and characterized by XRD, SEM and TG. XRD results showed the characteristic peaks of polyamide 6 and ferrite. SEM results showed a good dispersion of nickel ferrite loading in the matrix, the presence of larger clusters and evenly distributed load for the composite calcined at 1200 ° C. TG curves showed that the addition of loading of calcined nickel ferrite promoted an increase in thermal stability of the composite compared to pure polyamide.

Preparation and characterization of heterocyclic polyamide 6 (PA 6) with high transparencies and low hygroscopicities

2019 ◽  
Vol 1175 ◽  
pp. 836-843 ◽  
Author(s):  
Chiu-Chun Lai ◽  
Shih-You Chen ◽  
Meng-Hsin Chen ◽  
Hsin-Lung Chen ◽  
Ho-Ting Hsiao ◽  
...  
Keyword(s):  
Polyamide 6

Synthesis and characterization of polyamide-6/graphite oxide nanocomposites

2010 ◽  
Vol 46 (4) ◽  
pp. 882-888 ◽  
Author(s):  
Yan Liu ◽  
Zhenming Chen ◽  
Guisheng Yang
Keyword(s):  
Graphite Oxide ◽  
Polyamide 6 ◽  
Synthesis And Characterization
Sign in / Sign up

Export Citation Format

Share Document