A reconfigurable ultra-wideband polarization converter based on metasurface incorporated with PIN diodes

2019 ◽  
Vol 125 (13) ◽  
pp. 135105 ◽  
Author(s):  
Jianghao Tian ◽  
Xiangyu Cao ◽  
Jun Gao ◽  
Huanhuan Yang ◽  
Jiangfeng Han ◽  
...  
2019 ◽  
Vol 12 (3) ◽  
pp. 252-258 ◽  
Author(s):  
Liping Han ◽  
Jing Chen ◽  
Wenmei Zhang

AbstractA compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the reconfigurable band-notch performance, two PIN diodes are inserted in the slots, and then the notch-band can be switched by changing the states of the PIN diodes. The antenna has a compact size of 0.47 λ1 × 0.27 λ1. The simulated and measured results indicate that the antenna can operate at a UWB mode, two single band-notch modes, and a dual band-notch mode. Moreover, stable radiation patterns are obtained.


2016 ◽  
Vol 58 (10) ◽  
pp. 2402-2405 ◽  
Author(s):  
Bao-Qin Lin ◽  
Xin-Yu Da ◽  
Jia-Liang Wu ◽  
Wei Li ◽  
Yin-Wu Fang ◽  
...  

2017 ◽  
Vol 25 (22) ◽  
pp. 27616 ◽  
Author(s):  
Yannan Jiang ◽  
Lei Wang ◽  
Jiao Wang ◽  
Charles Nwakanma Akwuruoha ◽  
Weiping Cao

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Biswarup Rana ◽  
In-Gon Lee ◽  
Ic-Pyo Hong

In this paper, an electronically reconfigurable polarization converter unit cell operating at X-band is proposed. The polarization converter unit cell consists of a passive patch, a phase shifter, and an active patch. There are two PIN diodes on the active patch. By switching the bias conditions of those PIN diodes, an electronically reconfigurable polarization converter is conceived. Both the passive and active patches are circular, and there are circular types of slots on both patches to enhance the operating bandwidth. To compensate for the capacitance introduced by PIN diodes, an equivalent capacitance structure is introduced on the active patch. 2 × 2 unit cells are designed to check the performance of the unit cell for polarization conversion applications. In addition, a novel type of experimental characterization technique is proposed to check the performance of polarization conversion using 2 × 2 unit cells. Two WR-90 waveguide sections, two rectangular to square sections, and a power supply are taken for the measurements. The rectangular to square waveguide transition section is designed in such a way so that 2 × 2 unit cells can be perfectly adjusted on the transition section and the performance of the 2 × 2 unit cells can be measured. The simulation results of the 8 × 8 array are also added to a miniaturized X-band horn antenna to check the performance of the overall array.


2019 ◽  
Vol 125 (2) ◽  
Author(s):  
Baoqin Lin ◽  
Jianxin Guo ◽  
Lintao Lv ◽  
Jing Wu ◽  
Yahong Ma ◽  
...  

2019 ◽  
Vol 451 ◽  
pp. 124-128 ◽  
Author(s):  
Yu-zhou Ran ◽  
Li-hua Shi ◽  
Jian-bao Wang ◽  
Shi-Bin Wang ◽  
Guang-Ming Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document