scholarly journals Thermodynamic simulation of a hybrid thermo-solar externally fired gas turbine power plant fueled with biomass

2018 ◽  
Author(s):  
Agustín Ghazarian ◽  
Daiana De León ◽  
Pedro Galione ◽  
Pedro Curto-Risso ◽  
Alejandro Medina ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Thermodynamic Simulation ◽  
Gas Turbine Power Plant

scholarly journals A Proper Shape of the Trailing Edge Modification to Solve a Housing Damage Problem in a Gas Turbine Power Plant

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 705
Author(s):  
Thodsaphon Jansaengsuk ◽  
Mongkol Kaewbumrung ◽  
Wutthikrai Busayaporn ◽  
Jatuporn Thongsri
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Structural Dynamics ◽  
Pressure Ratio ◽  
Equivalent Stress ◽  
Total Deformation ◽  
Trailing Edge ◽  
Housing Damage ◽  
The Difference ◽  
Gas Turbine Power Plant

To solve the housing damage problem of a fractured compressor blade (CB) caused by an impact on the inner casing of a gas turbine in the seventh stage (from 15 stages), modifications of the trailing edge (TE) of the CB have been proposed, namely 6.5 mm curved cutting and a combination of 4 mm straight cutting with 6.5 mm curved cutting. The simulation results of the modifications in both aerodynamics variables Cl and Cd and the pressure ratio, including structural dynamics such as a normalized power spectrum, frequency, total deformation, equivalent stress, and the safety factor, found that 6.5 mm curved cutting could deliver the aerodynamics and structural dynamics similar to the original CB. This result also overcomes the previous work that proposed 5.0 mm straight cutting. This work also indicates that the operation of a CB gives uneven pressure and temperature, which get higher in the TE area. The slightly modified CB can present the difference in the properties of both the aerodynamics and the structural dynamics. Therefore, any modifications of the TE should be investigated for both properties simultaneously. Finally, the results from this work can be very useful information for the modification of the CB in the housing damage problem of the other rotating types of machinery in a gas turbine power plant.

Thermal performance of gas turbine power plant based on exergy analysis

2017 ◽  
Vol 115 ◽  
pp. 977-985 ◽  
Author(s):  
Thamir K. Ibrahim ◽  
Firdaus Basrawi ◽  
Omar I. Awad ◽  
Ahmed N. Abdullah ◽  
G. Najafi ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Thermal Performance ◽  
Exergy Analysis ◽  
Gas Turbine Power Plant

Combustion Tuning for a Gas Turbine Power Plant Using Data-Driven and Machine Learning Approach

2021 ◽  
Vol 143 (3) ◽  
Author(s):  
Suhui Li ◽  
Huaxin Zhu ◽  
Min Zhu ◽  
Gang Zhao ◽  
Xiaofeng Wei
Keyword(s):  
Machine Learning ◽  
Power Plant ◽  
Gas Turbine ◽  
Operating Conditions ◽  
Data Driven ◽  
Ann Model ◽  
Promising Alternative ◽  
Combustion Performance ◽  
Wide Range ◽  
Gas Turbine Power Plant

Abstract Conventional physics-based or experimental-based approaches for gas turbine combustion tuning are time consuming and cost intensive. Recent advances in data analytics provide an alternative method. In this paper, we present a cross-disciplinary study on the combustion tuning of an F-class gas turbine that combines machine learning with physics understanding. An artificial-neural-network-based (ANN) model is developed to predict the combustion performance (outputs), including NOx emissions, combustion dynamics, combustor vibrational acceleration, and turbine exhaust temperature. The inputs of the ANN model are identified by analyzing the key operating variables that impact the combustion performance, such as the pilot and the premixed fuel flow, and the inlet guide vane angle. The ANN model is trained by field data from an F-class gas turbine power plant. The trained model is able to describe the combustion performance at an acceptable accuracy in a wide range of operating conditions. In combination with the genetic algorithm, the model is applied to optimize the combustion performance of the gas turbine. Results demonstrate that the data-driven method offers a promising alternative for combustion tuning at a low cost and fast turn-around.

Performance Analysis of a Combined Cycle Power Plant Through Exergetic and Environmental Indices

2017 ◽  
Author(s):  
Edgar Vicente Torres González ◽  
Raúl Lugo Leyte ◽  
Martín Salazar Pereyra ◽  
Helen Denise Lugo Méndez ◽  
Miguel Toledo Velázquez ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Environmental Indices ◽  
Combined Cycle Power Plant ◽  
Combustion Gases ◽  
Combined Cycle Plant ◽  
Exergetic Analysis ◽  
Gas Turbine Power Plant

In this paper is carried out a comparison between a gas turbine power plant and a combined cycle power plant through exergetic and environmental indices in order to determine performance and sustainability aspects of a gas turbine and combined cycle plant. First of all, an exergetic analysis of the gas turbine and the combined is carried out then the exergetic and environmental indices are calculated for the gas turbine (case A) and the combined cycle (case B). The exergetic indices are exergetic efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy ratio, environmental effect factor and exergetic sustainability. Besides, the environmental indices are global warming, smog formation and acid rain indices. In the case A, the two gas turbines generate 278.4 MW; whereas 415.19 MW of electricity power is generated by the combined cycle (case B). The results show that exergetic sustainability index for cases A and B are 0.02888 and 0.1058 respectively. The steam turbine cycle improves the overall efficiency, as well as, the reviewed exergetic indexes. Besides, the environmental indices of the gas turbines (case A) are lower than the combined cycle environmental indices (case B), since the combustion gases are only generated in the combustion chamber.

Sign in / Sign up

Export Citation Format

Share Document