Dynamics of vortex loops after reconnection in superfluid helium at different temperatures

2018 ◽  
Vol 44 (10) ◽  
pp. 1020-1024 ◽  
Author(s):  
V. A. Andryushchenko ◽  
L. P. Kondaurova
Keyword(s):  
Superfluid Helium ◽  
Vortex Loops ◽  
Different Temperatures

The nucleation of vorticity by ions in superfluid 4 He I. Basic theory

1984 ◽  
Vol 311 (1518) ◽  
pp. 433-467 ◽  
Keyword(s):  
High Pressure ◽  
Potential Barrier ◽  
Superfluid Helium ◽  
Recent Observation ◽  
Critical Value ◽  
Vortex Loop ◽  
Quantum Tunnelling ◽  
Vortex Loops ◽  
Very High ◽  
Vortex Nucleation

A theory is developed of vortex nucleation by an ion moving in superfluid helium at a low temperature. It is shown that production of a vortex loop attached to the side of the ion becomes energetically possible when the velocity of the ion exceeds a critical value, but that nucleation is impeded by the presence of a small potential barrier. The predicted critical velocity is close to that observed experimentally, at least at high pressure. Nucleation of an encircling vortex ring, considered some years ago by Schwarz & Jang (Phys.Rev. A8,3199 (1973)), probably becomes possible only at a higher velocity, and it is impeded by a large potential barrier. It is shown that for vortex loops the potential barrier can probably be overcome at a rate consistent with experiment either by quantum tunnelling at the lowest temperatures or thermally, by absorption of a single roton, at higher temperatures. Possible explanations of the recent observation by Bowley et al . {Phil. Trans. R. Soc. Lond. A307, 201 (1982)) that at high pressure the rate of vortex nucleation falls off at very high velocities are discussed.

Observations oh Nucleation and Growth of Voids in Nickel

1970 ◽  
Vol 28 ◽  
pp. 414-415
Author(s):  
J. L. Brimhall ◽  
H. E. Kissinger ◽  
B. Mastel
Keyword(s):  
High Purity ◽  
Growth Stage ◽  
Elevated Temperatures ◽  
Early Growth ◽  
Nucleation And Growth ◽  
Pure Nickel ◽  
Different Temperatures ◽  
Total Fluence ◽  
Neutron Exposure ◽  
Growth Of Voids

Some information on the size and density of voids that develop in several high purity metals and alloys during irradiation with neutrons at elevated temperatures has been reported as a function of irradiation parameters. An area of particular interest is the nucleation and early growth stage of voids. It is the purpose of this paper to describe the microstructure in high purity nickel after irradiation to a very low but constant neutron exposure at three different temperatures.Annealed specimens of 99-997% pure nickel in the form of foils 75μ thick were irradiated in a capsule to a total fluence of 2.2 × 1019 n/cm2 (E > 1.0 MeV). The capsule consisted of three temperature zones maintained by heaters and monitored by thermocouples at 350, 400, and 450°C, respectively. The temperature was automatically dropped to 60°C while the reactor was down.

The structure of membranes and membrane proteins embedded in amorphous ice

1992 ◽  
Vol 50 (1) ◽  
pp. 432-433
Author(s):  
Uwe Lücken ◽  
Joachim Jäger
Keyword(s):  
Phase Transition ◽  
Transition Temperature ◽  
Membrane Proteins ◽  
Phase Transition Temperature ◽  
Lipid Vesicles ◽  
Freezing Stress ◽  
Amorphous Ice ◽  
Different Temperatures ◽  
Band Pass ◽  
Lipid Polymorphism

TEM imaging of frozen-hydrated lipid vesicles has been done by several groups Thermotrophic and lyotrophic polymorphism has been reported. By using image processing, computer simulation and tilt experiments, we tried to learn about the influence of freezing-stress and defocus artifacts on the lipid polymorphism and fine structure of the bilayer profile. We show integrated membrane proteins do modulate the bilayer structure and the morphology of the vesicles.Phase transitions of DMPC vesicles were visualized after freezing under equilibrium conditions at different temperatures in a controlled-environment vitrification system. Below the main phase transition temperature of 24°C (Fig. 1), vesicles show a facetted appearance due to the quasicrystalline areas. A gradual increase in temperature leads to melting processes with different morphology in the bilayer profile. Far above the phase transition temperature the bilayer profile is still present. In the band-pass-filtered images (Fig. 2) no significant change in the width of the bilayer profile is visible.

Microstructure of sputter deposited Ni-Sb ohmic contacts on GaAs

1989 ◽  
Vol 47 ◽  
pp. 450-451
Author(s):  
S. Yegnasubramanian ◽  
V.C. Kannan ◽  
R. Dutto ◽  
P.J. Sakach
Keyword(s):  
High Performance ◽  
Ohmic Contacts ◽  
Surface Defects ◽  
Pure Metal ◽  
Device Fabrication ◽  
Native Oxide ◽  
Metal Thin Films ◽  
Recent Developments ◽  
Different Temperatures ◽  
Sputter Deposited

Recent developments in the fabrication of high performance GaAs devices impose crucial requirements of low resistance ohmic contacts with excellent contact properties such as, thermal stability, contact resistivity, contact depth, Schottky barrier height etc. The nature of the interface plays an important role in the stability of the contacts due to problems associated with interdiffusion and compound formation at the interface during device fabrication. Contacts of pure metal thin films on GaAs are not desirable due to the presence of the native oxide and surface defects at the interface. Nickel has been used as a contact metal on GaAs and has been found to be reactive at low temperatures. Formation Of Ni2 GaAs at 200 - 350C is reported and is found to grow epitaxially on (001) and on (111) GaAs, but is shown to be unstable at 450C. This paper reports the investigations carried out to understand the microstructure, nature of the interface and composition of sputter deposited and annealed (at different temperatures) Ni-Sb ohmic contacts on GaAs by TEM. Attempts were made to correlate the electrical properties of the films such as the sheet resistance and contact resistance, with the microstructure. The observations are corroborated by Scanning Auger Microprobe (SAM) investigations.

High-Resolution Cryo-Electron Microscopy of Biological Macromolecules

1990 ◽  
Vol 48 (1) ◽  
pp. 126-127
Author(s):  
Yoshinori Fujiyoshi
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Diffraction Pattern ◽  
Superfluid Helium ◽  
Copper Phthalocyanine ◽  
Optical Diffraction ◽  
Irradiation Damage ◽  
Biological Macromolecules ◽  
Cross Sectional ◽  
Instrumental Resolution

The resolution of direct images of biological macromolecules is normally restricted to far less than 0.3 nm. This is not due instrumental resolution, but irradiation damage. The damage to biological macromolecules may expect to be reduced when they are cooled to a very low temperature. We started to develop a new cryo-stage for a high resolution electron microscopy in 1983, and successfully constructed a superfluid helium stage for a 400 kV microscope by 1986, whereby chlorinated copper-phthalocyanine could be photographed to a resolution of 0.26 nm at a stage temperature of 1.5 K. We are continuing to develop the cryo-microscope and have developed a cryo-microscope equipped with a superfluid helium stage and new cryo-transfer device.The New cryo-microscope achieves not only improved resolution but also increased operational ease. The construction of the new super-fluid helium stage is shown in Fig. 1, where the cross sectional structure is shown parallel to an electron beam path. The capacities of LN2 tank, LHe tank and the pot are 1400 ml, 1200 ml and 3 ml, respectively. Their surfaces are placed with gold to minimize thermal radiation. Consumption rates of liquid nitrogen and liquid helium are 170 ml/hour and 140 ml/hour, respectively. The working time of this stage is more than 7 hours starting from full LN2 and LHe tanks. Instrumental resolution of our cryo-stage cooled to 4.2 K was confirmed to be 0.20 nm by an optical diffraction pattern from the image of a chlorinated copper-phthalocyanine crystal. The image and the optical diffraction pattern are shown in Fig. 2 a, b, respectively.

VISCOSITY OF NORMAL AND SUPERFLUID HELIUM THREE

1978 ◽  
Vol 39 (C6) ◽  
pp. C6-35-C6-36 ◽  
Author(s):  
J. M. Parpia ◽  
D. J. Sandiford ◽  
J. E. Berthold ◽  
J. D. Reppy
Keyword(s):  
Superfluid Helium ◽  
Helium Three
Sign in / Sign up

Export Citation Format

Share Document