Physics of vacuum generation in zero-secondary flow ejectors

2018 ◽  
Vol 30 (6) ◽  
pp. 066102 ◽  
Author(s):  
R. Arun Kumar ◽  
G. Rajesh
Keyword(s):  
Secondary Flow ◽  
Vacuum Generation

scholarly journals Numerical Simulation of a Supersonic Ejector for Vacuum Generation with Explicit and Implicit Solver in Openfoam

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3553 ◽  
Author(s):  
Ll Macia ◽  
R. Castilla ◽  
P. J. Gamez-Montero ◽  
S. Camacho ◽  
E. Codina
Keyword(s):  
Secondary Flow ◽  
Transient Behaviour ◽  
Upwind Schemes ◽  
Supersonic Ejector ◽  
Implicit Solver ◽  
Explicit Solver ◽  
Air Nozzle ◽  
Vacuum Generation ◽  
Final Agreement ◽  
Polytropic Exponent

Supersonic ejectors are used extensively in all kind of applications: compression of refrigerants in cooling systems, pumping of volatile fluids or in vacuum generation. In vacuum generation, also known as zero-secondary flow, the ejector has a transient behaviour. In this paper, a numerical and experimental research of a supersonic compressible air nozzle is performed in order to investigate and to simulate its behaviour. The CFD toolbox OpenFOAM 6 was used, with two density-based solvers: explicit solver rhoCentralFoam, which implements Kurganov Central-upwind schemes, and implicit solver HiSA, which implements the AUSM+up upwind scheme. The behaviour of the transient evacuation ranges between adiabatic polytropic exponent at the beginning of the process and isothermal at the end. A model for the computation of the transient polytropic exponent is proposed. During the evacuation, two regimes are encountered in the second nozzle. In the supercritic regime, the secondary is choked and sonic flow is reached. In the subcritic regime, the secondary flow is subsonic. The final agreement is good with the two different solvers, although simulation tends to slightly overestimate flow rate for large values region.

Studies of secondary flow at endwall of a supersonic compressor cascade

AIAA Journal ◽  
1998 ◽  
Vol 36 ◽  
pp. 128-133 ◽  
Author(s):  
Denver J. Osborne ◽  
Wing F. Ng ◽  
Daniel L. Tweedt
Keyword(s):  
Secondary Flow ◽  
Compressor Cascade

scholarly journals A Review of Numerical Simulations of Secondary Flows in River Bends

Water ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 884
Author(s):  
Rawaa Shaheed ◽  
Abdolmajid Mohammadian ◽  
Xiaohui Yan
Keyword(s):  
Numerical Modeling ◽  
Numerical Simulations ◽  
Secondary Flow ◽  
Cross Section ◽  
Turbulence Models ◽  
Main Flow ◽  
Secondary Flows ◽  
River Bends ◽  
River Cross Section ◽  
River Bend

River bends are one of the common elements in most natural rivers, and secondary flow is one of the most important flow features in the bends. The secondary flow is perpendicular to the main flow and has a helical path moving towards the outer bank at the upper part of the river cross-section, and towards the inner bank at the lower part of the river cross-section. The secondary flow causes a redistribution in the main flow. Accordingly, this redistribution and sediment transport by the secondary flow may lead to the formation of a typical pattern of river bend profile. It is important to study and understand the flow pattern in order to predict the profile and the position of the bend in the river. However, there are a lack of comprehensive reviews on the advances in numerical modeling of bend secondary flow in the literature. Therefore, this study comprehensively reviews the fundamentals of secondary flow, the governing equations and boundary conditions for numerical simulations, and previous numerical studies on river bend flows. Most importantly, it reviews various numerical simulation strategies and performance of various turbulence models in simulating the flow in river bends and concludes that the main problem is finding the appropriate model for each case of turbulent flow. The present review summarizes the recent advances in numerical modeling of secondary flow and points out the key challenges, which can provide useful information for future studies.

Unsteady Flow Phenomena in Rotating Centrifugal Impeller Passages

1970 ◽  
Vol 92 (1) ◽  
pp. 65-71 ◽  
Author(s):  
E. Lennemann ◽  
J. H. G. Howard
Keyword(s):  
Unsteady Flow ◽  
Secondary Flow ◽  
Centrifugal Impeller ◽  
Bubble Flow ◽  
Hydrogen Bubble ◽  
Visualization Technique ◽  
Rotating Systems ◽  
Flow Phenomena ◽  
Relative Flow ◽  
Zero Flow

The phenomena of unsteady relative flow observed in a centrifugal impeller passage running at part capacity and zero flow are discussed. The mechanisms of passage stall for a shrouded and unshrouded impeller are investigated and a qualitative correlation is developed for the influence of secondary flow and inducer flow on the passage stall. The hydrogen bubble flow visualization technique is extended to higher velocities and rotating systems and provides the method for obtaining the experimental results.

Influence of secondary flow on aero-engine performance

2013 ◽  
Author(s):  
Xiao-bo Zhang ◽  
Zhan-xue Wang ◽  
Zeng-wen Liu
Keyword(s):  
Secondary Flow ◽  
Engine Performance ◽  
Aero Engine

Influence of Hot Streak Temperature Ratio on Low Pressure Stage of a Vaneless Counter-Rotating Turbine

2007 ◽  
Author(s):  
Qingjun Zhao ◽  
Fei Tang ◽  
Huishe Wang ◽  
Jianyi Du ◽  
Xiaolu Zhao ◽  
...  
Keyword(s):  
Shock Wave ◽  
High Pressure ◽  
Secondary Flow ◽  
Low Pressure ◽  
Turbine Rotor ◽  
Temperature Ratio ◽  
High Pressure Turbine ◽  
Pressure Stage ◽  
Low Pressure Turbine ◽  
Hot Streak

In order to explore the influence of hot streak temperature ratio on low pressure stage of a Vaneless Counter-Rotating Turbine, three-dimensional multiblade row unsteady Navier-Stokes simulations have been performed. The predicted results show that hot streaks are not mixed out by the time they reach the exit of the high pressure turbine rotor. The separation of colder and hotter fluids is observed at the inlet of the low pressure turbine rotor. After making interactions with the inner-extending shock wave and outer-extending shock wave in the high pressure turbine rotor, the hotter fluid migrates towards the pressure surface of the low pressure turbine rotor, and the most of colder fluid migrates to the suction surface of the low pressure turbine rotor. The migrating characteristics of the hot streaks are predominated by the secondary flow in the low pressure turbine rotor. The effect of buoyancy on the hotter fluid is very weak in the low pressure turbine rotor. The results also indicate that the secondary flow intensifies in the low pressure turbine rotor when the hot streak temperature ratio is increased. The effects of the hot streak temperature ratio on the relative Mach number and the relative flow angle at the inlet of the low pressure turbine rotor are very remarkable. The isentropic efficiency of the Vaneless Counter-Rotating Turbine decreases as the hot streak temperature ratio is increased.

Sign in / Sign up

Export Citation Format

Share Document