scholarly journals Binary particle separation in droplet microfluidics using acoustophoresis

2018 ◽  
Vol 112 (6) ◽  
pp. 063701 ◽  
Author(s):  
Anna Fornell ◽  
Kevin Cushing ◽  
Johan Nilsson ◽  
Maria Tenje
Keyword(s):  
Particle Separation ◽  
Droplet Microfluidics

Prefiltration/Clarification via Dynamic Particle Separation

2015 ◽  
Vol 2 (0) ◽  
pp. 9781843396703-9781843396703
Author(s):  
S. R. Wright ◽  
S. Crouch ◽  
D. Wesson ◽  
S. Grady
Keyword(s):  
Particle Separation

scholarly journals Microdroplet-based system for culturing of environmental microorganisms using FNAP-sort

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kanako Saito ◽  
Yuri Ota ◽  
Dieter M. Tourlousse ◽  
Satoko Matsukura ◽  
Hirotsugu Fujitani ◽  
...  
Keyword(s):  
Nucleic Acid ◽  
High Purity ◽  
Droplet Microfluidics ◽  
Individual Growth ◽  
Proof Of Concept ◽  
Widespread Adoption ◽  
Technical Challenges ◽  
On Chip ◽  
Uncultured Microorganisms ◽  
Environmental Microbes

AbstractDroplet microfluidics has emerged as a powerful technology for improving the culturing efficiency of environmental microorganisms. However, its widespread adoption has been limited due to considerable technical challenges, especially related to identification and manipulation of individual growth-positive droplets. Here, we combined microfluidic droplet technology with on-chip “fluorescent nucleic acid probe in droplets for bacterial sorting” (FNAP-sort) for recovery of growth-positive droplets and droplet microdispensing to establish an end-to-end workflow for isolation and culturing of environmental microbes. As a proof-of-concept, we demonstrate the ability of our technique to yield high-purity cultures of rare microorganisms from a representative complex environmental microbiome. As our system employs off-the-shelf commercially available equipment, we believe that it can be readily adopted by others and may thus find widespread use toward culturing the high proportion of as-of-yet uncultured microorganisms in different biomes.

scholarly journals Interfacial Tension Measurements in Microfluidic Quasi-Static Extensional Flows

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 272
Author(s):  
Doojin Lee ◽  
Amy Q. Shen
Keyword(s):  
Interfacial Tension ◽  
Microfluidic Device ◽  
Extensional Flow ◽  
Immiscible Fluids ◽  
Droplet Microfluidics ◽  
Channel Height ◽  
Deformation Model ◽  
Droplet Deformation ◽  
Extensional Flows ◽  
2D Model

Droplet microfluidics provides a versatile tool for measuring interfacial tensions between two immiscible fluids owing to its abilities of fast response, enhanced throughput, portability and easy manipulations of fluid compositions, comparing to conventional techniques. Purely homogeneous extension in the microfluidic device is desirable to measure the interfacial tension because the flow field enables symmetric droplet deformation along the outflow direction. To do so, we designed a microfluidic device consisting of a droplet production region to first generate emulsion droplets at a flow-focusing area. The droplets are then trapped at a stagnation point in the cross junction area, subsequently being stretched along the outflow direction under the extensional flow. These droplets in the device are either confined or unconfined in the channel walls depending on the channel height, which yields different droplet deformations. To calculate the interfacial tension for confined and unconfined droplet cases, quasi-static 2D Darcy approximation model and quasi-static 3D small deformation model are used. For the confined droplet case under the extensional flow, an effective viscosity of the two immiscible fluids, accounting for the viscosity ratio of continuous and dispersed phases, captures the droplet deformation well. However, the 2D model is limited to the case where the droplet is confined in the channel walls and deforms two-dimensionally. For the unconfined droplet case, the 3D model provides more robust estimates than the 2D model. We demonstrate that both 2D and 3D models provide good interfacial tension measurements under quasi-static extensional flows in comparison with the conventional pendant drop method.

scholarly journals High-resolution particle separation by inertial focusing in high aspect ratio curved microfluidics

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Javier Cruz ◽  
Klas Hjort
Keyword(s):  
High Resolution ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Biological Fluids ◽  
Essential Feature ◽  
Particle Separation ◽  
Size Difference ◽  
Inertial Focusing ◽  
Complex Samples ◽  
Wide Range

AbstractThe ability to focus, separate and concentrate specific targets in a fluid is essential for the analysis of complex samples such as biological fluids, where a myriad of different particles may be present. Inertial focusing is a very promising technology for such tasks, and specially a recently presented variant, inertial focusing in High Aspect Ratio Curved systems (HARC systems), where the systems are easily engineered and focus the targets together in a stable position over a wide range of particle sizes and flow rates. However, although convenient for laser interrogation and concentration, by focusing all particles together, HARC systems lose an essential feature of inertial focusing: the possibility of particle separation by size. Within this work, we report that HARC systems not only do have the capacity to separate particles but can do so with extremely high resolution, which we demonstrate for particles with a size difference down to 80 nm. In addition to the concept for particle separation, a model considering the main flow, the secondary flow and a simplified expression for the lift force in HARC microchannels was developed and proven accurate for the prediction of the performance of the systems. The concept was also demonstrated experimentally with three different sub-micron particles (0.79, 0.92 and 1.0 µm in diameter) in silicon-glass microchannels, where the resolution in the separation could be modulated by the radius of the channel. With the capacity to focus sub-micron particles and to separate them with high resolution, we believe that inertial focusing in HARC systems is a technology with the potential to facilitate the analysis of complex fluid samples containing bioparticles like bacteria, viruses or eukaryotic organelles.

scholarly journals Droplet Microfluidics for Tumor Drug‐Related Studies and Programmable Artificial Cells

2021 ◽  
pp. 2000123
Author(s):  
Pantelitsa Dimitriou ◽  
Jin Li ◽  
Giusy Tornillo ◽  
Thomas McCloy ◽  
David Barrow
Keyword(s):  
Droplet Microfluidics ◽  
Artificial Cells

scholarly journals Rotational Particle Separation in Solutions: Micropolar Fluid Theory Approach

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1072
Author(s):  
Vladimir Shelukhin
Keyword(s):  
Mathematical Model ◽  
Rotational Diffusion ◽  
Particle Separation ◽  
Theory Approach ◽  
Steady Flows ◽  
Concentric Cylinder ◽  
Polar Fluid ◽  
Fluid Theory ◽  
Couette Cell ◽  
Granular Fluid

We develop a new mathematical model for rotational sedimentation of particles for steady flows of a viscoplastic granular fluid in a concentric-cylinder Couette geometry when rotation of the Couette cell inner cylinder is prescribed. We treat the suspension as a micro-polar fluid. The model is validated by comparison with known data of measurement. Within the proposed theory, we prove that sedimentation occurs due to particles’ rotation and rotational diffusion.

Sign in / Sign up

Export Citation Format

Share Document