Application of back-propagation artificial neural network (ANN) to predict crystallite size and band gap energy of ZnO quantum dots

2017 ◽  
Author(s):  
Christian Mark Pelicano ◽  
Nick Rapadas ◽  
Gerard Cagatan ◽  
Eduardo Magdaluyo
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Quantum Dots ◽  
Band Gap ◽  
Crystallite Size ◽  
Back Propagation ◽  
Band Gap Energy ◽  
Gap Energy ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

ARTIFICIAL NEURAL NETWORK (ANN)-BASED PREDICTIVE TOOL FOR ESTIMATING LIGHTNING DAMAGE IN COMPOSITES

2021 ◽  
Author(s):  
DEVIN NIELSEN ◽  
TYLER LOTT ◽  
SOM DUTTA ◽  
JUHYEONG LEE
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Network Architecture ◽  
Back Propagation ◽  
Training Dataset ◽  
Predictive Tool ◽  
Ann Models ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Hidden Layer

In this study, three artificial neural network (ANN) models are developed with back propagation (BP) optimization algorithms to predict various lightning damage modes in carbon/epoxy laminates. The proposed ANN models use three input variables associated with lightning waveform parameters (i.e., the peak current amplitude, rising time, and decaying time) to predict fiber damage, matrix damage, and through-thickness damage in the composites. The data used for training and testing the networks was actual lightning damage data collected from peer-reviewed published literature. Various BP training algorithms and network architecture configurations (i.e., data splitting, the number of neurons in a hidden layer, and the number of hidden layers) have been tested to improve the performance of the neural networks. Among the various BP algorithms considered, the Bayesian regularization back propagation (BRBP) showed the overall best performance in lightning damage prediction. When using the BRBP algorithm, as expected, the greater the fraction of the collected data that is allocated to the training dataset, the better the network is trained. In addition, the optimal ANN architecture was found to have a single hidden layer with 20 neurons. The ANN models proposed in this work may prove useful in preliminary assessments of lightning damage and reduce the number of expensive experimental lightning tests.

scholarly journals Predicting hearing loss from otoacoustic emissions using an artificial neural network

2002 ◽  
Vol 49 (1) ◽  
Author(s):  
Rouviere De Waal ◽  
René Hugo ◽  
Maggi Soer ◽  
Johann J. Krüger
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Otoacoustic Emissions ◽  
Back Propagation ◽  
Normal Hearing ◽  
Hearing Impaired ◽  
Distortion Product ◽  
Hearing Ability ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Normal and impaired pure tone thresholds (PTTs) were predicted from distortion product otoacoustic emissions (DP using a feed-forward artificial neural network (ANN) with a back-propagation training algorithm. The ANN used a present and absent DPOAEs from eight DP grams, (2fl -f2 = 406 - 4031 Hz) to predict PTTs at 0.5, 1, 2 and 4 kHz. With normal hearing as < 25 dB HL, prediction accuracy of normal hearing was 94% at 500, 88% at 1000, 88% at 2000 and 93% at 4000 Hz. Prediction of hearing-impaired categories was less accurate, due to insufficient data for the ANN to train on. This research indicates the possibility of accurately predicting hearing ability within 10 dB in normal hearing individuals and in hearing-impaired listeners with DPOAEs and ANNsfrom 500 - 4000 Hz.

scholarly journals Artificial neural network classification-based skin cancer detection

2017 ◽  
Vol 7 (1.1) ◽  
pp. 591
Author(s):  
M. Shyamala Devi ◽  
A.N. Sruthi ◽  
P. Balamurugan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Skin Cancer ◽  
Back Propagation ◽  
Modern Technology ◽  
Data Set ◽  
Processing Strategies ◽  
Skin Cancers ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

At present, skin cancers are extremely the most severe and life-threatening kind of cancer. The majority of the pores and skin cancers are completely remediable at premature periods. Therefore, a premature recognition of pores and skin cancer can effectively protect the patients. Due to the progress of modern technology, premature recognition is very easy to identify. It is not extremely complicated to discover the affected pores and skin cancers with the exploitation of Artificial Neural Network (ANN). The treatment procedure exploits image processing strategies and Artificial Intelligence. It must be noted that, the dermoscopy photograph of pores and skin cancer is effectively determined and it is processed to several pre-processing for the purpose of noise eradication and enrichment in image quality. Subsequently, the photograph is distributed through image segmentation by means of thresholding. Few components distinctive for skin most cancers regions. These features are mined the practice of function extraction scheme - 2D Wavelet Transform scheme. These outcomes are provides to the Back-Propagation Neural (BPN) Network for effective classification. This completely categorizes the data set into either cancerous or non-cancerous. 

scholarly journals Detection and Classification of Power Quality Disturbancewaveform Using MRA Based Modified Wavelet Transfrom and Neural Networks

2010 ◽  
Vol 61 (4) ◽  
pp. 235-240 ◽  
Author(s):  
Perumal Chandrasekar ◽  
Vijayarajan Kamaraj
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Power Quality ◽  
Wavelet Transforms ◽  
Back Propagation ◽  
Voltage Sag ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Detection and Classification of Power Quality Disturbancewaveform Using MRA Based Modified Wavelet Transfrom and Neural Networks In this paper, the modified wavelet based artificial neural network (ANN) is implemented and tested for power signal disturbances. The power signal is decomposed by using modified wavelet transform and the classification is carried by using ANN. Discrete modified wavelet transforms based signal decomposition technique is integrated with the back propagation artificial neural network model is proposed. Varieties of power quality events including voltage sag, swell, momentary interruption, harmonics, transient oscillation and voltage fluctuation are used to test the performance of the proposed approach. The simulation is carried out by using MATLAB software. The simulation results show that the proposed scheme offers superior detection and classification compared to the conventional approaches.

Prediction of Cutting Temperatures by Using Back Propagation Neural Network Modeling when Cutting Hardened H-13 Steel in CNC End Milling

2012 ◽  
Vol 576 ◽  
pp. 91-94 ◽  
Author(s):  
Erry Yulian Triblas Adesta ◽  
Muataz H.F. Al Hazza ◽  
M.Y. Suprianto ◽  
Muhammad Riza
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
End Milling ◽  
Back Propagation ◽  
Cutting Temperature ◽  
Neural Network Modeling ◽  
Feed Forward Back Propagation ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Cnc End Milling

Machining of hardened steel at high cutting speeds produces high temperatures in the cutting zone, which affects the surface quality and cutting tool life. Thus, predicting the temperature in early stage becomes utmost importance. This research presents a neural network model for predicting the cutting temperature in the CNC end milling process. The Artificial Neural Network (ANN) was applied as an effective tool for modeling and predicting the cutting temperature. A set of sparse experimental data for finish end milling on AISI H13 at hardness of 48 HRC have been conducted to measure the cutting temperature. The artificial neural network (ANN) was applied to predict the cutting temperature. Twenty hidden layer has been used with feed forward back propagation hierarchical neural networks were designed with Matlab2009b Neural Network Toolbox. The results show a high correlation between the predicted and the observed temperature which indicates the validity of the models.

scholarly journals Application of Artificial Neural Network for Predicting Shaft and Tip Resistances of Concrete Piles

2015 ◽  
Vol 19 (1) ◽  
pp. 85-93 ◽  
Author(s):  
Ehsan Momeni ◽  
Ramli Nazir ◽  
Danial Jahed Armaghani ◽  
Harnedi Maizir
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Predictive Model ◽  
Back Propagation ◽  
Load Test ◽  
Static Load Test ◽  
Concrete Piles ◽  
Feed Forward Back Propagation ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

<p class="MsoNormal" style="text-align: justify; line-height: 200%;">Axial bearing capacity (ABC) of piles is usually determined by static load test (SLT). However, conducting SLT is costly and time-consuming. High strain dynamic pile testing (HSDPT) which is provided by pile driving analyzer (PDA) is a more recent approach for predicting the ABC of piles. In comparison to SLT, PDA test is quick and economical. Implementing feed forward back-propagation artificial neural network (ANN) for solving geotechnical problems has recently gained attention mainly due to its ability in finding complex nonlinear relationships among different parameters. In this study, an ANN-based predictive model for estimating ABC of piles and its distribution is proposed. For network construction purpose, 36 PDA tests were performed on various concrete piles in different project sites. The PDA results, pile geometrical characteristics as well as soil investigation data were used for training the ANN models. Findings indicate the feasibility of ANN in predicting ultimate, shaft and tip bearing resistances of piles. The coefficients of determination, R², equal to 0.941, 0.936, and 0.951 for testing data reveal that the shaft, tip and ultimate bearing capacities of piles predicted by ANN-based model are in close agreement with those of HSDPT. By using sensitivity analysis, it was found that the length and area of the piles are dominant factors in the proposed predictive model.</p><p class="MsoNormal" style="text-align: justify; line-height: 200%;"> </p><p class="MsoNormal" style="text-align: justify; line-height: 200%;"><strong>Resumen</strong></p><p class="MsoNormal" style="text-align: justify; line-height: 200%;">La Capacidad Axial de Soporte (ABC, en inglés) de un pilote de construcción se determina usualmente a través de una Prueba de Carga Estática (SLT, inglés). Sin embargo, estas pruebas son costosas y demandan tiempo. La evaluación de las Dinámicas de Alto Esfuerzo de Pilotes (HSDPT, inglés), que la provee el programa de Análisis de Excavación (PDA, inglés), es una forma de aproximación más reciente para preveer la Capacidad Axial de Soporte. En comparación con la Prueba de Cargas Estática, la evaluación PDA es rápida y económica. La implementación de Redes Neuronales Arficiales (ANN, en inglés) que permita resolver problemas geotécnicos ha ganado atención recientemente debido a su posibilidad de hallar relaciones no lineales entre los diferentes parámetros. En este estudio se propone un modelo predictivo ANN para estimar la Capacidad Axial de Soporte de pilotes y su distribución. Para fines de una red de construcción se realizaron 36 pruebas PDA en pilotes de diferentes proyectos. Los resultados de los Análisis de Excavación, las características geométricas de los pilotes, al igual que los datos de investigación del suelo se utilizaron para probar los modelos ANN. Los resultados indican la viabilidad del modelo ANN en predecir la resistencia de los pilotes. Los coeficientes de correlación, R², que alcanzaron 0.941, 09.36 y 0.951 para la evaluación de los datos, revelan que la capacidad del pilotaje en el último rodamiento, en el cojinete del eje y en la punta que se predijeron con el modelo ANN concuerda con las establecidas a través del HSDPT. A través del análisis de respuesta se determinó que la longitud y el área de los pilotes son factores dominantes en el modelo predictivo propuesto.</p>

scholarly journals Implementation of Autonomous Control System of The Chain Wheel Robot Using the Backpropagation Artificial Neural Network (ANN) Methods

2020 ◽  
Vol 5 (8) ◽  
pp. 1230-1235
Author(s):  
Nur Rachman Supadmana Muda ◽  
Nugraha Gumilar ◽  
R.Djoko Andreas. Navalino ◽  
Tirton. N ◽  
M.Iman Hidayat
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Control System ◽  
Robot Control ◽  
Back Propagation ◽  
Robot System ◽  
Output Data ◽  
Backpropagation Method ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The purpose of this research is to implement the Artificial Neural Network (ANN) method in combat robots so it can be directed to shoot targets well. The robot control system uses remote control and autonomous. In the autonomous robot system, ANN back propagation method is applied, where the weight value variable depends on ultrasonic sensor, GPS and camera. The microcontroller system will process automatically depending on the sensor input. Output data is used to direct the robot to the target, tracking and shooting. Robot is used chain wheel systems and weapons that used pistol types. The riffle is mounted on the robot can be moved mechanically azimuth and the elevation towards the target then triggered mechanically by the riffle through the activation of data relays from the microcontroller. Thus, the backpropagation method can be applied to robots so it can be functioned autonomously.

scholarly journals Artificial Neural Network (ANN) based Object Recognition Using Multiple Feature Sets

2011 ◽  
pp. 32-36
Author(s):  
Manami Barthakur ◽  
Tapashi Thakuria ◽  
Kandarpa Kumar Sarma
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Back Propagation ◽  
Principal Component ◽  
Multi Layer Perceptron ◽  
Multiple Features ◽  
Error Back Propagation ◽  
Multiple Feature ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this work, a simplified Artificial Neural Network (ANN) based approach for recognition of various objects is explored using multiple features. The objective is to configure and train an ANN to be capable of recognizing an object using a feature set formed by Principal Component Analysis (PCA), Frequency Domain and Discrete Cosine Transform (DCT) components. The idea is to use these varied components to form a unique hybrid feature set so as to capture relevant details of objects for recognition using a ANN which for the work is a Multi Layer Perceptron (MLP) trained with (error) Back Propagation learning.

Analysis of artificial neural network performance based on influencing factors for temperature forecasting applications

2020 ◽  
Vol 26 (3) ◽  
pp. 209-223
Author(s):  
M. Madhiarasan ◽  
M. Tipaldi ◽  
P. Siano
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Influencing Factors ◽  
Network Performance ◽  
Back Propagation ◽  
Back Propagation Algorithm ◽  
Research Fields ◽  
Temperature Forecasting ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Artificial neural network (ANN)-based methods belong to one of the most growing research fields within the artificial intelligence ecosystem, and many novel contributions have been developed over the last years. They are applied in many contexts, although some “influencing factors” such as the number of neurons, the number of hidden layers, and the learning rate can impact the performance of the resulting artificial neural network-based applications. This paper provides a deep analysis about artificial neural network performance based on such factors for real-world temperature forecasting applications. An improved back propagation algorithm for such applications is also presented. By using the results of this paper, researchers and practitioners can analyse the encountered issues when applying ANN-based models for their own specific applications with the aim of achieving better performance indexes.

scholarly journals Learned Prediction of Compressive Strength of GGBFS Concrete Using Hybrid Artificial Neural Network Models

Materials ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 3708 ◽  
Author(s):  
In-Ji Han ◽  
Tian-Feng Yuan ◽  
Jin-Young Lee ◽  
Young-Soo Yoon ◽  
Joong-Hoon Kim
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Compressive Strength ◽  
Experimental Studies ◽  
Back Propagation ◽  
Network Models ◽  
Neural Network Models ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Artificial Neural Network Models

A new hybrid intelligent model was developed for estimating the compressive strength (CS) of ground granulated blast furnace slag (GGBFS) concrete, and the synergistic benefits of the hybrid algorithm as compared with a single algorithm were verified. While using the collected 269 data from previous experimental studies, artificial neural network (ANN) models with three different learning algorithms namely back-propagation (BP), particle swarm optimization (PSO), and new hybrid PSO-BP algorithms, were constructed and the performance of the models was evaluated with regard to the prediction accuracy, efficiency, and stability through a threefold procedure. It was found that the PSO-BP neural network model was superior to the simple ANNs that were trained by a single algorithm and it is suitable for predicting the CS of GGBFS concrete.

Sign in / Sign up

Export Citation Format

Share Document