Parametric study of extended end-plate connection using finite element modeling

2017 ◽  
Author(s):  
Ioana Cristina Mureşan ◽  
Roxana Bâlc
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Parametric Study ◽  
Element Modeling ◽  
End Plate ◽  
Extended End Plate ◽  
Plate Connection

Parametric study of pull-out radius for steam generator shell nozzle junction for fast breeder reactor

2012 ◽  
Vol 227 (9) ◽  
pp. 2129-2139 ◽  
Author(s):  
N Mani ◽  
G Thanigaiyarasu ◽  
P Chellapandi
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Steam Generator ◽  
Parametric Study ◽  
Radius Of Curvature ◽  
Fast Breeder Reactor ◽  
Shell Elements ◽  
Element Modeling ◽  
Pull Out

This article presents the parametric study of pull-out radius of steam generator shell nozzle junction for fast breeder reactor. An efficient finite element modeling for shell nozzle junction has been presented in which shell elements are employed to idealize the whole region. In shell nozzle junction, pull-out region is an important part, so that region is taken and studied with different radius of curvature. The pull-out radius varies from 40 to 80 mm. Five models are taken into consideration and each with different radius of curvature. The optimized stress values for all the models are presented here.

FINITE ELEMENT MODELING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE

2012 ◽  
Vol 12 (01) ◽  
pp. 23-51 ◽  
Author(s):  
R. EL-HACHA ◽  
P. ZANGENEH ◽  
H. Y. OMRAN
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Parametric Study ◽  
Large Scale ◽  
Composite Beams ◽  
Experimental Results ◽  
Fe Model ◽  
Element Modeling ◽  
Cfrp Plate ◽  
Good Agreement

Results from finite element modeling (FEM) of large-scale steel-concrete composite beams strengthened in flexure with prestressed carbon fiber-reinforced polymer (CFRP) plate were validated with experimental results and presented in this paper. The effect of varying the level of prestressing as percentage of the ultimate tensile strength of the CFRP plate was investigated. Comparison was carried out in terms of overall load-deflection behavior, strain profile along the length of the CFRP plate, and strain distribution across the depth of the beam at mid-span section. Very good agreement was observed between the finite element (FE) and the experimental results. The validated FE models were used to perform a comprehensive parametric study to investigate the changes in the behavior through wider range of prestressing levels and then, determine the optimum prestressing level that maintain the unstrengthened beams' original ductility (or energy absorption). An iterative analytical model was also developed, validated with both the FE model and the experimental results, and showed good agreement. A parametric study was carried out to investigate the effect of changing the yield strength of the steel and the concrete compressive strength on the moment of resistance of the section and the strain in the CFRP plate at ultimate.

scholarly journals Analysis of the Mechanical Behavior of Bolted Beam-Column Connections with Different Structural Forms

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Rongqian Yang ◽  
Xuejun Zhou
Keyword(s):  
Finite Element ◽  
Mechanical Behavior ◽  
Simulation Analysis ◽  
Element Model ◽  
Hysteretic Behavior ◽  
Load Bearing ◽  
End Plate ◽  
Extended End Plate ◽  
Plate Connections ◽  
Plate Connection

In order to study the mechanical behavior of bolted beam-column connections, the accuracy and applicability of the finite element model were firstly validated according to the published experiments on end-plate connections using ABAQUS. Then, in order to discuss the mechanical behavior of connections, three semirigid connections which are convenient for prefabricated construction, including top-and-seat angle connections with web and ear plate, extended end-plate connection, and T-stub connection, were examined using numerical simulation analysis to study and compare their capacity, hysteretic behavior, ductility, and degradation characteristics in detail. The results showed that the finite element models that were built could effectively simulate the load bearing behavior of bolted connections under both single-direction loading and cyclic loading. The three connections showed good load bearing capacity. The connectors significantly affected the energy dissipation capacity under load. The extended end-plate connection demonstrated the best performance in both mechanical behavior and manufacture and installation, so it would therefore be the preferred option.

Parametric study of head response by finite element modeling

1977 ◽  
Vol 10 (2) ◽  
pp. 119-132 ◽  
Author(s):  
Tawfik B. Khalil ◽  
Robert P. Hubbard
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Parametric Study ◽  
Element Modeling
Sign in / Sign up

Export Citation Format

Share Document