scholarly journals Preparation of activated carbon from walnut shell and its application in industrial wastewater

Author(s):  
Yilin Jiang
2020 ◽  
Vol 81 (10) ◽  
pp. 2109-2126 ◽  
Author(s):  
Seyed Omid Ahmadinejad ◽  
Seyed Taghi Omid Naeeni ◽  
Zahra Akbari ◽  
Sara Nazif

Abstract One of the major pollutants in leachate is phenol. Due to safety and environmental problems, removal of phenol from leachate is essential. Most of the adsorption studies have been conducted in batch systems. Practically, large-scale adsorption is carried out in continuous systems. In this research, the adsorption method has been used for phenol removal from leachate by using walnut shell activated carbon (WSA) and coconut shell activated carbon (CSA) as adsorbents in a fixed-bed column. The effect of adsorbent bed depth, influent phenol concentration and type of adsorbent on adsorption was explored. By increasing the depth of the adsorbent bed in the column, phenol removal efficiency and saturation time increase significantly. Also, by increasing the influent concentration, saturation time of the column decreases. To predict the column performance and describe the breakthrough curve, three kinetic models of Yon-Nelson, Adams-Bohart and Thomas were applied. The results of the experiments indicate that there is a good match between the results of the experiment and the predicted results of the models.


2018 ◽  
Vol 34 (6) ◽  
pp. 1014-1019
Author(s):  
Chunli Kang ◽  
Dan Shang ◽  
Ting Yang ◽  
Ling Zhu ◽  
Fang Liu ◽  
...  

2016 ◽  
Vol 11 (4) ◽  
pp. 784-795 ◽  
Author(s):  
Abolghasem Alighardashi ◽  
Shooza Shahali

Excessive nitrate in the water impose a danger to human health and contribute to eutrophication. The present continuous fixed bed pilot study was carried out using granular activated carbon made from walnut shell for removal of nitrate from aqueous solution and natural groundwater. The carbon was characterized using SEM, FTIR and BET. The BET specific surface area and average pore size before nitrate adsorption were 1434.6 m2g−1 and 2.08 nm, respectively, and after were 633.28 m2g−1 and 2.04 nm, respectively. Optimum removal of nitrate was achieved at a contact time of 2 min, pH of 6.5 and a nitrate concentration of 200 mg/l. The hydraulic loading rate was calculated to be 10 m3/h.m2 and the maximum adsorption capacity using the Langmuir adsorption isotherm model (R2 = 0.99) was 10 mg NO3/g. These experiments were also carried out using groundwater and the removal of nitrate decreased from 68% to 60% because of competition with other cations and anions.


2013 ◽  
Vol 470 ◽  
pp. 11-14 ◽  
Author(s):  
Rui Xin Guo ◽  
Zhi Liang Wang ◽  
Guo Ping Li ◽  
Jian Qiu Chen

The adsorption of cefradine was carried out using biological adsorbents of powder and carbon prepared from orange peels, an agriculture by-product. The equilibrium was easily reached in less than 10 minutes, with adsorption rates of more than 98%. Cefradine showed a firm combination to the adsorbent, which could hardly be damaged or affected by pH values. After equilibrium was reached within 1 h, no desorption behavior was observed in the next 30 minutes. The adsorption process could be well fitted thermodynamically to both Freundlich and Langmuir equations. Similar results could also be obtained using ashes of orange peel, as well as carbon prepared from pistachio and peanut hull, indicating an attractive option to treat industrial wastewater.


Sign in / Sign up

Export Citation Format

Share Document