scholarly journals Improving hot corrosion resistance of two phases intermetallic alloy α2-Ti3Al/γ-TiAl with enamel coating

2017 ◽  
Author(s):  
Muhammad Jajar Pambudi ◽  
Eddy Agus Basuki ◽  
Djoko Hadi Prajitno
Keyword(s):  
Corrosion Resistance ◽  
Hot Corrosion ◽  
Enamel Coating ◽  
Intermetallic Alloy ◽  
Two Phases

ROLLED ALLOYS HR-120

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Thermal Processing ◽  
Hot Corrosion ◽  
Heat Treating ◽  
Temperature Performance

Abstract HR-120 alloy is an alloy designed for thermal processing. It possesses excellent strength, oxidizing hot corrosion resistance, good carburization resistance, and oxidation resistance through 1093 deg C (2000 deg F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-561. Producer or source: Rolled Alloys.

Effect of pre-oxidation on hot corrosion resistance of HR3C stainless steel in sulfate salt with or without Fe2O3

2021 ◽  
Vol 192 ◽  
pp. 109789
Author(s):  
Zheng Yu ◽  
Jintao Lu ◽  
Minghui Chen ◽  
Jinlong Wang ◽  
Fuhui Wang
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Hot Corrosion ◽  
Sulfate Salt

scholarly journals Study of Molten Salt Corrosion of Superni-75 using Termogravimetric Technique

1970 ◽  
Vol 3 (2) ◽  
pp. 77-82 ◽  
Author(s):  
TS Sidhu ◽  
S Prakash ◽  
RD Agrawal
Keyword(s):  
Corrosion Resistance ◽  
Molten Salt ◽  
Hot Corrosion ◽  
Corrosion Behaviour ◽  
Thick Layer ◽  
X Ray Diffraction ◽  
Salt Corrosion ◽  
Marine Engineering ◽  
The Given ◽  
Kinetics Of

The present study aims to evaluate the hot corrosion behaviour of the Ni-based alloy Superni- 75 in the molten salt environment of Na2SO-60%V2O5 at 900°C under cyclic conditions. The thermogravimetric technique was used to establish the kinetics of corrosion. X-ray diffraction, scanning electron microscopy/energy-dispersive analysis and electron probe microanalysis techniques were used to analyse the corrosion products. Superni-75 has successfully provided the hot corrosion resistance to the given molten salt environment. The hot corrosion resistance of the Superni-75 has been attributed to the formation of uniform, homogeneous and adherent thick layer of the scale consisting mainly of oxides of nickel and chromium, and refractory Ni(VO3)2. These oxides and refractory nickel vanadates have blocked the penetration of oxygen and other corrosive species to the substrate. Keywords: Hot corrosion, nickel-based alloy, superalloy, molten salt environment   DOI: 10.3329/jname.v3i2.922 Journal of Naval Architecture and Marine Engineering 3(2006) 77-82

Corrosion behavior of new type Co-based superalloys with different Ni contents

2017 ◽  
Vol 35 (6) ◽  
pp. 455-462 ◽  
Author(s):  
Bo Gao ◽  
Lei Wang ◽  
Yang Liu ◽  
Xiu Song ◽  
Shu-Yu Yang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Hot Corrosion ◽  
Corrosion Layer ◽  
Corrosion Process ◽  
Corrosion Properties ◽  
Oxidation Processes ◽  
Ni Content ◽  
Ni Addition ◽  
New Type

AbstractThe corrosion properties of γ′-strengthened Co-xNi-Al-W-Cr (where x=15, 20, 25, and 30 at.%) superalloys were investigated in the mixture of 75 wt.% Na2SO4+25 wt.% NaCl at 900°C. The results showed that the corrosion behavior is associated with both sulfuration and oxidation processes. It was demonstrated that increasing the addition of Ni effectively promoted the formation of continuous Al2O3 scales, so that the hot corrosion resistance could be improved. When Ni content is more than 20 at.%, a large amount of Ni3S2 precipitates during the corrosion process. Sulfuration can destroy the integrity of the corrosion layer and increase the activity of oxygen. In this way, the internal oxidation of the alloys becomes more serious. Therefore, it is recommended that the optimum Ni addition is about 20 at.% for new type Co-Ni-Al-W-Cr superalloys.

Sign in / Sign up

Export Citation Format

Share Document