scholarly journals Rock burst governance of working face under igneous rock

2017 ◽  
Author(s):  
Zhenxing Chang ◽  
Yue Yu
Keyword(s):  
Rock Burst ◽  
Igneous Rock ◽  
Working Face

scholarly journals Features of separation water hazard in China coalmines

2017 ◽  
Vol 12 (1) ◽  
pp. 146-155 ◽  
Author(s):  
Herong Gui ◽  
Manli Lin ◽  
Xiaomei Song
Keyword(s):  
Case Studies ◽  
Rock Burst ◽  
Influencing Factors ◽  
Igneous Rock ◽  
Working Face ◽  
Hazard Control ◽  
Mining Conditions ◽  
Water Hazard ◽  
Bed Separation

Separation water is a commonly-seen water hazard in China coalmines. This article, built on case studies of disasters caused by separation water, analyzes the key influencing factors in the formation of separation and the water hazard, as well as the features and causes of explosive, delayed explosive, and intermittent separation water burst. The article takes as an example of one accident caused by roof bed separation water burst in the 745 working face of Haizi Coalmine. The study has a particular interest in separation water burst accompanied by rock burst when mining under thick-hard igneous rock. The results are of reference to countries with similar mining conditions and researches on separation water burst and hazard control in coalmines.

scholarly journals Research on the Source Mechanism and Source Prevention and Control System of Deep Rock Burst

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Shuai Di
Keyword(s):  
Control System ◽  
Rock Mass ◽  
Rock Burst ◽  
Prevention And Control ◽  
Economic Benefits ◽  
Efficient Production ◽  
Targeted Prevention ◽  
Working Face ◽  
Deep Rock ◽  
And Control

Deep rock burst accidents occur frequently and become increasingly serious. Further improving the effectiveness and accuracy of the prevention and control of rock burst, ensuring the safe and efficient production of mines, clarifying the basic causes of disasters, and refining the type of deep rock burst are the most important key links. Aiming at the problems such as unclear incentives and types and the lack of effective and targeted prevention measures of deep rock burst, taking Xin’an Mine as the research background, based on the energy theory, the coal and rock mass multisource energy unified equation was established to analyze coal and rock mass instability mechanism. According to the different degrees of participation of various factors, the types of deep rock burst are determined as three categories and four types, and the corresponding judgment criteria are proposed. The precise prevention and control system for the source of rock burst with Xin’an characteristics is proposed, successfully applied to the 8101 working face, which not only guarantees the safe production of the working face, but also achieves good economic benefits. The research results lay the foundation for improving the accuracy and precision of the prevention and control of deep rock burst and provide theoretical guidance for the safe and efficient mining of the mine.

Research Foundation of Rock-Burst Hazard Control for Mining Pattern with No Pillar

2010 ◽  
Vol 156-157 ◽  
pp. 207-210
Author(s):  
Zhi Jie Wen ◽  
Lian Jun Chen ◽  
Xiao Dong Zhao ◽  
Chuan Zhang
Keyword(s):  
Rock Burst ◽  
Abutment Pressure ◽  
Relevant Information ◽  
Mechanics Model ◽  
Working Face ◽  
Hazard Control ◽  
Time Space ◽  
Relationship Of ◽  
The Relationship ◽  
Realization Condition

In order to effectively prevent the rock burst occurrence for mining patter with no pillar, the reason and its realization condition of rock burst were studied; the stope structure mechanics model with working face mining was built; four phases of rock burst occurrence with mining were proposed; the relationship between rock burst occurrence and abutment pressure law of development was analyzed, time-space coupling relationship of rock burst and its relevant information for rock burst control were obtained.

scholarly journals Experimental Study on the Effect of Advancing Speed and Stoping Time on the Energy Release of Overburden in an Upward Mining Coal Working Face with a Hard Roof

2019 ◽  
Vol 12 (1) ◽  
pp. 37 ◽  
Author(s):  
Feng Cui ◽  
Yanbin Yang ◽  
Xingping Lai ◽  
Chong Jia ◽  
Pengfei Shan
Keyword(s):  
Coal Seam ◽  
Energy Release ◽  
Rock Burst ◽  
Response Ratio ◽  
Working Face ◽  
Significant Difference ◽  
Loading And Unloading ◽  
Microseismic Events ◽  
Microseismic Event ◽  
The Impact

In order to study the influence of advancing speed and stoping time of a coal face on the scale and frequency of rock burst, the energy release characteristics of an overburden fracture under six advancing speeds and four stoping times are studied by theoretical analysis and similar simulation experiments. The distribution characteristics of microseismic events before and after stoppage are compared, and the load/unload response ratio is introduced to analyze the relationship between the synergistic effect of advancing speed and stoping time and the characteristics of microseismic events in coal and rock mass. The mechanism of rock burst induced by the advancing speed and stoping time effect in the working face is studied, and the coordinated regulation and mitigation of advancing speed and stoping time are analyzed and completed. The results show that the effect of advancement speed and stoping time is very important to the energy release of overburden. The energy released by microseismic events during stoping is exponentially related to the advancing speed. The change of advancing speed causes the change of microseismic event characteristics, reflecting the evolution process of overburden structure and its energy. During stoping, the secondary microseismic events disturbed by mining occur frequently, leading to the significant difference of energy released by microseismic events during stoping. After stoping, the microseismic energy is more than four times higher than that during the stop period, and the risk of coal seam impact is high during the stope period. The synergetic change of advancement speed and stoping time changes the cycle of energy accumulation and release. The response ratio of loading and unloading considering the effect of advancement speed and stoping time is established by using the corresponding ratio of loading and unloading, and the impact risk of the coal seam is quantitatively analyzed. Based on the monitoring and analysis of microseismic events, the safety mining index of coordinated control with the energy of a single microseismic event of 180 J is established, and the best advancing speed of the working face is determined to be 4 m/d. According to the corresponding ratio of loading and unloading, the reasonable stoping time of different advancing speeds and the corresponding advancing speed of different stoping times after the resumption of mining are determined, so as to provide a reference for the safe and efficient mining of similar rock burst mines.

scholarly journals Research of Rock Burst Risk Induced by Mining and Field Case in Anticlinal Control Area

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Shitan Gu ◽  
Zhimin Xiao ◽  
Bangyou Jiang ◽  
Ruifeng Huang ◽  
Peng Shan
Keyword(s):  
Rock Burst ◽  
Abutment Pressure ◽  
Elastic Strain Energy ◽  
Tectonic Stress ◽  
Residual Energy ◽  
Theoretical Research ◽  
Energy Principle ◽  
Unique Type ◽  
Working Face ◽  
Rock Burst Risk

Stress concentration caused by tectonic stress and mining disturbance in coal mines induces a unique type of rock burst. No. 3201 working face controlled by an anticline structure in the Shandong mining area is used as the research background. The formation mechanism for anticlines is analyzed. Theoretical research shows that the bigger the tectonic couple is, the smaller the foundation stiffness, and the greater the bending degree and elastic strain energy of the coal will be. The distribution characteristics of abutment pressure and maximum principle stress in anticlinal control areas are analyzed using UDEC numerical software. The results show that rock bursts result from interactions between abutment pressure and residual tectonic stress. The “connection-overlay-separation” phenomenon of abutment pressure presents with working face advancement. Furthermore, the energy criterion for rock burst initiation is established based on the energy principle. Residual energy “E0−EC” and rock burst danger characteristics during mining are discussed. Based on the simulation results, microseismic monitoring data for No. 3201 working face are analyzed, and the law of microseismic energy is consistent with the variation law for the residual energy “E0−EC” at the peak of the simulated abutment pressure. The microseismic energy and frequency are higher during mining, increasing the risk of rock burst events. It can provide scientific basis for prevention and control of rock burst.

scholarly journals An Approach to Dynamic Disaster Prevention in Strong Rock Burst Coal Seam under Multi-Aquifers: A Case Study of Tingnan Coal Mine

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7287
Author(s):  
Xinxin Zhou ◽  
Zhenhua Ouyang ◽  
Ranran Zhou ◽  
Zhenxing Ji ◽  
Haiyang Yi ◽  
...  
Keyword(s):  
Rock Burst ◽  
Coal Mine ◽  
Water Inrush ◽  
Coal Seams ◽  
High Position ◽  
Integrated Method ◽  
Working Face ◽  
Strong Rock ◽  
And Control

In order to prevent the multi-dynamic disasters induced by rock burst and roof water inrush in strong rock burst coal seams under multi-aquifers, such as is the case with the 207 working face in the Tingnan coal mine considered in this study, the exhibited characteristics of two types of dynamic disasters, namely rock burst and water inrush, were analyzed. Based on the lithology and predicted caving height of the roof, the contradiction between rock burst and water inrush was analyzed. In light of these analyses, an integrated method, roof pre-splitting at a high position and shattering at a low position, was proposed. According to the results of numerical modelling, pre-crack blasting at higher rock layers enables a cantilever roof cave in time, thereby reducing the risk of rock burst, and pre-crack blasting at underlying rock layers helps increase the crushing degree of the rock, which is beneficial for decreasing the caving height of rock layers above goaf, thereby preventing the occurrence of water inrush. Finally, the proposed method was applied in an engineering case, and the effectiveness of this method for prevention and control of multi-dynamics disasters was evaluated by field observations of the caving height of rock layers and micro-seismic monitoring. As a result, the proposed method works well integrally to prevent and control rock burst and water inrush.

scholarly journals Study on Rock Burst Early Warning in the Working Face of Deep Coal Mines Based on the Law of Gas Emission

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Qinghua Zhang ◽  
Shudong He
Keyword(s):  
Rock Burst ◽  
Early Warning ◽  
Critical Value ◽  
Gas Emission ◽  
Distribution Law ◽  
Deep Mine ◽  
Gas Concentration ◽  
Research Results ◽  
Working Face ◽  
The Law

This study is aimed at predicting rock burst disasters in high gas mines. First, the distribution law and correlation of gas and stress in the F15-17-11111 working face of Pingdingshan No. 13 Mine were analyzed based on the coupling relationship between gas emission and stress in the working face. Next, the relationship between gas emission and stress distribution was revealed, and an early warning method of rock burst in the deep mine working face based on the law of gas emission was proposed and applied to the F15-17-11111 working face. Finally, the critical value of the gas concentration indicator for rock burst early warning in the F15-17-11111 working face was determined as 0.05%. The following research results were obtained. The gas emission and the mining stress in the F15-17-11111 working face are negatively correlated. Mechanically, their correlation satisfies the typical coupling. Besides, the critical value of the gas concentration indicator determined by the proposed early warning method boasts high accuracy in predicting rock burst disasters. It can be used as an early warning method for underground rock burst disasters to promote the safety of working face mining. The research results provide reference and guidance for the monitoring and early warning of rock burst disasters in deep high gas mines.

scholarly journals Study on the Mechanism and Control of Rock Burst of Coal Pillar under Complex Conditions

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-19
Author(s):  
Xingping Lai ◽  
Huicong Xu ◽  
Jingdao Fan ◽  
Zeyang Wang ◽  
Zhenguo Yan ◽  
...  
Keyword(s):  
Stress Concentration ◽  
Rock Burst ◽  
Coal Mine ◽  
High Stress ◽  
Coal Pillar ◽  
Vertical Stress ◽  
Body Area ◽  
High Stress Concentration ◽  
Solid Coal ◽  
Working Face

In order to explore the mechanism of coal pillar rock burst in the overlying coal body area, taking W1123 working face of Kuangou Coal Mine as the engineering background, the full mining stage of W1123 is simulated by FLAC3D. It is found that the high stress concentration area has appeared on both sides of the coal pillar when W1123 does not start mining. With the advance of the working face, the high stress concentration area forms X-shaped overlap. There is an obvious difference in the stress state between the coal pillar under the solid coal and the coal pillar under the gob in W1123. The concrete manifestation is that the vertical stress of the coal pillar below the solid coal is greater than the vertical stress of the coal pillar below the gob. The position of the obvious increase of the stress of the coal pillar in the lower part of the solid coal is ahead of the advancing position of the working face, and the position of the obvious increase of the stress of the lower coal pillar in the gob lags behind the advancing position of the working face. At the same time, in order to accurately reflect the true stress environment of coal pillars, the author conducted a physical similarity simulation experiment in the laboratory to study the local mining process of the W1123 working face, and it is found that under the condition of extremely thick and hard roof, the roof will be formed in the gob, the mechanical model of roof hinged structurer is constructed and analyzed, and the results show that the horizontal thrust of roof structure increases with the increase of rotation angle. With the development of mining activities, the self-stable state of the high stress balance in the coal pillar is easily broken by the impact energy formed by the sudden collapse of the key strata. Therefore, the rock burst of coal pillar in the overlying coal body area is the result of both static load and dynamic load. In view of the actual situation of the Kuangou Coal Mine, the treatment measures of rock burst are put forward from the point of view of the coal body and rock mass.

Sign in / Sign up

Export Citation Format

Share Document