scholarly journals Effect of a bimodal initial particle volume fraction perturbation in an explosive dispersal of particles

2017 ◽  
Author(s):  
Frederick Ouellet ◽  
Subramanian Annamalai ◽  
Bertrand Rollin
Keyword(s):  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Initial Particle ◽  
Particle Volume ◽  
Explosive Dispersal

Effects of Initial Perturbations in the Early Moments of an Explosive Dispersal of Particles

2016 ◽  
Vol 138 (7) ◽  
Author(s):  
Subramanian Annamalai ◽  
Bertrand Rollin ◽  
Frederick Ouellet ◽  
Christopher Neal ◽  
Thomas L. Jackson ◽  
...  
Keyword(s):  
Gas Phase ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
High Energy ◽  
Solid Particles ◽  
Dense Layer ◽  
Initial Particle ◽  
Particle Volume ◽  
Reactive Material ◽  
Explosive Dispersal

Recent experiments have shown that when a dense layer of solid particles surrounding a high-energy reactive material is explosively dispersed, the particles cluster locally leading to jetlike patterns. The formation of these coherent structures has yet to be fully understood and is believed to have its origin in the early moments of the explosive dispersal. This paper focuses on the early moments of an explosive dispersal of particles. In particular, the effect of initial perturbations on both the gas and particulate phase is investigated, considering heavy particles with a low initial particle volume fraction. Two-dimensional simulations are carried out, and results suggest that a distinctive heterogeneity in the form of a single wavelength perturbation in the rapidly expanding detonation products does not have a significant impact on the early evolution of neither the gas phase nor the cloud of particles. In contrast, the equivalent distinctive heterogeneity in the initial particle volume fraction distribution lingers for the duration of our simulations. Developing instabilities in the gas phase and at the inner- and outer-most front of the particle bed display a dominant wavelength equal to the wavelength of the initial perturbation in the particle volume fraction.

Interaction of a Shock Wave With a Dense Corrugated Particle Curtain

2017 ◽  
Author(s):  
Bertrand Rollin ◽  
Marie Desenlis
Keyword(s):  
Shock Wave ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Initial Perturbation ◽  
Point Particle ◽  
Planar Geometry ◽  
Late Time ◽  
Initial Particle ◽  
Particle Volume ◽  
Initial Shape

A numerical experiment studying the gas-particle variant of the Richtmyer-Meshkov instability is presented. Using an Eulerian-Lagrangian approach, namely point particle simulations, we track trajectories of computational particles composing an initially corrugated particle curtain, after the curtain’s interaction with a shock wave. We solve the compressible multiphase Euler equations in a two-dimensional planar geometry and use state-of-the-art particle force models, including unsteady forces, for the gas-particle coupling. However, additional complexities associated with compaction of the curtain of particles to random close packing limit and beyond are avoided by limiting the simulations to relatively modest initial volume fraction of particles. At a fixed Mach number, we explore the effects of the initial perturbation amplitude, initial particle volume fraction and initial shape on the dispersal of the particle curtain. For this shock strength, our simulations suggests that the amplitude of the initial perturbation does not play a significant role in the late time particle dispersal, contrary to the volume fraction. Higher initial particle volume fraction tend to faster particles dispersal. Finally, higher frequency initial perturbations seem to be absorbed by lower frequency initial perturbations.

Early Time Evolution of Circumferential Perturbation of Initial Particle Volume Fraction in Explosive Cylindrical Multiphase Dispersion

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
M. Giselle Fernández-Godino ◽  
Frederick Ouellet ◽  
Raphael T. Haftka ◽  
S. Balachandar
Keyword(s):  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Early Time ◽  
High Energy ◽  
Initial Distribution ◽  
Solid Particles ◽  
Particle Migration ◽  
Two Dimensional ◽  
Initial Particle ◽  
Particle Volume

When an annular bed of solid particles that surrounds a cylindrical high-energy explosive core gets radially dispersed after detonation, the expanding front of particles undergoes instabilities. One of the possible causes of the instabilities is an inhomogeneous initial distribution of particles. This study explores this possibility by introducing two-dimensional perturbations to the initial distribution of particles within the annular bed and quantifying the growth of these perturbations over time using two-dimensional simulations. The initial perturbations are in the form of superposition of up to three sinusoidal azimuthal modal variations in the initial particle volume fraction (PVF, ratio of particle to cell volume). These are observed to impact the particle distribution at later times through a channeling instability whose effects are: (i) to decrease the velocity in regions of larger particle volume (PV) and (ii) to facilitate circumferential particle migration into the slow moving high PV sectors. These departures from axisymmetry are quantified by introducing two metrics. The effect of varying the number of azimuthal modes contained in the initial PVF perturbation, along with their amplitudes, wavelengths, and relative phases is investigated. The proposed metrics do not vary substantially with the relative phases; however, there is a strong variation in the metrics due to changes in the wavenumber. Unimodal perturbations were found to amplify both metrics the most.

scholarly journals Performance improvement of double-tube gas cooler in CO2 refrigeration system using nanofluids

2015 ◽  
Vol 19 (1) ◽  
pp. 109-118 ◽  
Author(s):  
Jahar Sarkar
Keyword(s):  
Performance Improvement ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Cooling Capacity ◽  
Inlet Temperature ◽  
Refrigeration Cycle ◽  
Particle Volume ◽  
Transcritical Carbon Dioxide ◽  
The Given ◽  
Theoretical Analyses

The theoretical analyses of the double-tube gas cooler in transcritical carbon dioxide refrigeration cycle have been performed to study the performance improvement of gas cooler as well as CO2 cycle using Al2O3, TiO2, CuO and Cu nanofluids as coolants. Effects of various operating parameters (nanofluid inlet temperature and mass flow rate, CO2 pressure and particle volume fraction) are studied as well. Use of nanofluid as coolant in double-tube gas cooler of CO2 cycle improves the gas cooler effectiveness, cooling capacity and COP without penalty of pumping power. The CO2 cycle yields best performance using Al2O3-H2O as a coolant in double-tube gas cooler followed by TiO2-H2O, CuO-H2O and Cu-H2O. The maximum cooling COP improvement of transcritical CO2 cycle for Al2O3-H2O is 25.4%, whereas that for TiO2-H2O is 23.8%, for CuO-H2O is 20.2% and for Cu-H2O is 16.2% for the given ranges of study. Study shows that the nanofluid may effectively use as coolant in double-tube gas cooler to improve the performance of transcritical CO2 refrigeration cycle.

A simulation and experimental study on particle volume fraction of PMMA suspension in centrifugal fields

2021 ◽  
Author(s):  
Yosephus Ardean Kurnianto Prayitno ◽  
Tong Zhao ◽  
Yoshiyuki Iso ◽  
Masahiro Takei
Keyword(s):  
Experimental Study ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Particle Volume

Solidification Processing of Functionally Graded Materials by Sedimentation

1999 ◽  
Author(s):  
J. W. Gao ◽  
S. J. White ◽  
C. Y. Wang
Keyword(s):  
Functionally Graded Materials ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Computer Code ◽  
Functionally Graded ◽  
Particle Volume ◽  
Particle Sedimentation ◽  
Graded Materials ◽  
Free Zone ◽  
Free Region

Abstract A combined experimental and numerical investigation of the solidification process during gravity casting of functionally graded materials (FGMs) is conducted. Focus is placed on the interplay between the freezing front propagation and particle sedimentation. Experiments were performed in a rectangular ingot using pure substances as the matrix and glass beads as the particle phase. The time evolutions of local particle volume fractions were measured by bifurcated fiber optical probes working in the reflection mode. The effects of various processing parameters were explored. It is found that there exists a particle-free zone in the top portion of the solidified ingot, followed by a graded particle distribution region towards the bottom. Higher superheat results in slower solidification and hence a thicker particle-free zone and a higher particle concentration near the bottom. The higher initial particle volume fraction leads to a thinner particle-free region. Lower cooling temperatures suppress particle settling. A one-dimensional solidification model was also developed, and the model equations were solved numerically using a fixed-grid, finite-volume method. The model was then validated against the experimental results, and the validated computer code was used as a tool for efficient computational prototyping of an Al/SiC FGM.

Shock-Induced Multiphase Instability in a High Volume Fraction Finite-Thickness Particle Layer

2021 ◽  
Author(s):  
Bertrand Rollin ◽  
Frederick Ouellet ◽  
Bradford Durant ◽  
Rahul Babu Koneru ◽  
S. Balachandar
Keyword(s):  
Shock Tube ◽  
Volume Fraction ◽  
Solid Phase ◽  
Particle Volume Fraction ◽  
Finite Thickness ◽  
Spherical Particles ◽  
Shock Strength ◽  
Particle Volume ◽  
Particle Cloud ◽  
Particle Layer

Abstract We study the interaction of a planar air shock with a perturbed, monodispersed, particle curtain using point-particle simulations. In this Eulerian-Lagrangian approach, equations of motion are solved to track the position, momentum, and energy of the computational particles while the carrier fluid flow is computed in the Eulerian frame of reference. In contrast with many Shock-Driven Multiphase Instability (SDMI) studies, we investigate a configuration with an initially high particle volume fraction, which produces a strongly two-way coupled flow in the early moments following the shock-solid phase interaction. In the present study, the curtain is about 4 mm in thickness and has a peak volume fraction of about 26%. It is composed of spherical particles of d = 115μm in diameter and a density of 2500 kg.m−3, thus replicating glass particles commonly used in multiphase shock tube experiments or multiphase explosive experiments. We characterize both the evolution of the perturbed particle curtain and the gas initially trapped inside the particle curtain in our planar three-dimensional numerical shock tube. Control parameters such as the shock strength, the particle curtain perturbation wavelength and particle volume fraction peak-to-trough amplitude are varied to quantify their influence on the evolution of the particle cloud and the initially trapped gas. We also analyze the vortical motion in the flow field. Our results indicate that the shock strength is the primary contributor to the cloud particle width. Also, a classic Richtmyer-Meshkov instability mixes the gas initially trapped in the particle curtain and the surrounding gas. Finally, we observe that the particle cloud contribute to the formation of longitudinal vortices in the downstream flow.

Sign in / Sign up

Export Citation Format

Share Document