Particle image velocimetry experiment of blood flow through stent in artery bifurcation aneurysm problem

2016 ◽  
Author(s):  
N. Hafizah Mokhtar ◽  
Aizat Abas ◽  
Soon Lay Teong ◽  
N. A. Razak
Author(s):  
Arend F. L. Schinkel ◽  
Sakir Akin ◽  
Mihai Strachinaru ◽  
Rahatullah Muslem ◽  
Dan Bowen ◽  
...  

Abstract Purpose Poor left ventricular (LV) function may affect the physiological intraventricular blood flow and physiological vortex formation. The aim of this study was to investigate the pattern of intraventricular blood flow dynamics in patients with LV assist devices (LVADs) using echocardiographic particle image velocimetry. Materials and methods This prospective study included 17 patients (mean age 57 ± 11 years, 82% male) who had received an LVAD (HeartMate 3, Abbott Laboratories, Chicago, Illinois, USA) because of end-stage heart failure and poor LV function. Eleven (64%) patients had ischemic cardiomyopathy, and six patients (36%) had nonischemic cardiomyopathy. All patients underwent echocardiography, including intravenous administration of an ultrasound-enhancing agent (SonoVue, Bracco, Milan, Italy). Echocardiographic particle image velocimetry was used to quantify LV blood flow dynamics, including vortex formation (Hyperflow software, Tomtec imaging systems Gmbh, Unterschleissheim, Germany). Results Contrast-enhanced ultrasound was well tolerated in all patients and was performed without adverse reactions or side effects. The LVAD function parameters did not change during or after the ultrasound examination. The LVAD flow was on average 4.3 ± 0.3 L/min, and the speed was 5247 ± 109 rotations/min. The quantification of LV intraventricular flow demonstrated substantial impairment of vortex parameters. The energy dissipation, vorticity, and kinetic energy fluctuation indices were severely impaired. Conclusions Echo particle velocimetry is safe and feasible for the quantitative assessment of intraventricular flow in patients with an LVAD. The intraventricular LV flow and vortex parameters are severely impaired in these patients.


Author(s):  
Kaihong Yu ◽  
Tetsui Yamashita ◽  
Shigeaki Shingyochi ◽  
Kazuo Matsumoto ◽  
Makoto Ohta

Radiofrequency (RF) catheter ablation is a highly effective treatment for many cardiac arrhythmias, especially for tachyarrhythmia. RF energy is introduced through the catheter onto the endocardial surface to destroy the abnormal heart tissue causing the heart rhythm disorder. Many parameters relate to myocardial temperature, such as RF power, tissue contact, and blood flow. Blood flow is an important factor that has a cooling effect on myocardium and affects the final lesion size. Many previous studies have shown that under temperature control, lesion sizes are larger and tissue temperatures rise faster with a high flow rate. If the flow causes a decrease in the temperature of the catheter tip, the generator will increase the power output to maintain the tip at a constant temperature. However, few studies of RF catheter ablation have investigated how ablation affects blood flow. Observation of the flow pattern around the catheter can help to determine the mechanism of the flow effects on the temperature of the catheter tip. The purpose of this study is to observe the flow pattern during ablation using an in-vitro circulation system developed for Particle Image Velocimetry (PIV). We developed an open-channel circulation system to simulate blood flow. The mold for the open-channel was built with acrylic boards for transparency. The working fluid was 0.9% saline, which was used at room temperature (20°C). Instead of animal myocardium, we used a poly (vinyl alcohol) hydrogel (PVA-H), which has mechanical characteristics that approximate those of biological soft tissue, and contact with the PVA-H surface by the catheter is similar to that with myocardium. A 7 Fr catheter with a 4-mm ablation electrode tip was set perpendicular to the PVA-H surface, and the contact weight between the electrode of the catheter and the PVA-H surface was 2.2 gf. To measure the temperature profile in the PVA-H, a K-type thermocouple with the diameter of 0.5 mm was placed at the depth of 2 mm from the surface. The thermocouple tip was always placed on the catheter axis. The flow pattern at the location where the catheter was held was observed by a high speed camera, and the resulting images were analyzed by particle image velocimetry (PIV). The results showed that in the absence of applied flow, convection flow from the electrode is observed in the areas around the catheter. However, under a 1.6 L/min flow rate, convection flow disappears. In conclusion, blood flow could decrease the catheter tip temperature, and the influence of ablation in the flow around the catheter disappeared.


Sign in / Sign up

Export Citation Format

Share Document