scholarly journals The impact of heating the breakdown bubble on the global mode of a swirling jet: Experiments and linear stability analysis

2016 ◽  
Vol 28 (10) ◽  
pp. 104102 ◽  
Author(s):  
Lothar Rukes ◽  
Moritz Sieber ◽  
C. Oliver Paschereit ◽  
Kilian Oberleithner
Keyword(s):  
Stability Analysis ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Global Mode ◽  
Swirling Jet ◽  
The Impact

On the Impact of Shear Flow Instabilities on Global Heat Release Rate Fluctuations: Linear Stability Analysis of an Isothermal and a Reacting Swirling Jet

2012 ◽  
Author(s):  
Kilian Oberleithner ◽  
Sebastian Schimek ◽  
Christian Oliver Paschereit
Keyword(s):  
Stability Analysis ◽  
Heat Release ◽  
Shear Layer ◽  
Linear Stability ◽  
Heat Release Rate ◽  
Release Rate ◽  
Linear Stability Analysis ◽  
Amplitude Dependence ◽  
Swirling Jet ◽  
The Impact

The prediction of large-scale flow structures in combustor flows and their impact on the flame dynamics is of great importance to avoid thermoacoustic instabilities in modern gas turbine design. The streamwise growth of these so-called coherent structures depends on the receptivity of the shear layers, which can be predicted numerically by means of linear stability analysis. We demonstrate this approach on an isothermal swirling jet that is dominated by a self-excited helical mode that features a precessing vortex core, showing that this theoretical concept successfully predicts the frequency, the source, and the shape of this mode. The analysis is further applied to a reacting flow with a swirl-stabilized flame, pointing out important connections between the shear layer receptivity and the measured amplitude dependence of the flame transfer function. The theoretical findings suggest that the saturation of the global heat release rate fluctuations observed at moderate forcing amplitudes is caused by vanishing shear layer receptivity.

scholarly journals Modelling waving crops using large-eddy simulation: comparison with experiments and a linear stability analysis

2010 ◽  
Vol 652 ◽  
pp. 5-44 ◽  
Author(s):  
S. DUPONT ◽  
F. GOSSELIN ◽  
C. PY ◽  
E. DE LANGRE ◽  
P. HEMON ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Large Eddy Simulation ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Coupled Model ◽  
Wind Flow ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Eddy Structures ◽  
The Impact

In order to investigate the possibility of modelling plant motion at the landscape scale, an equation for crop plant motion, forced by an instantaneous velocity field, is introduced in a large-eddy simulation (LES) airflow model, previously validated over homogeneous and heterogeneous canopies. The canopy is simply represented as a poroelastic continuous medium, which is similar in its discrete form to an infinite row of identical oscillating stems. Only one linear mode of plant vibration is considered. Two-way coupling between plant motion and the wind flow is insured through the drag force term. The coupled model is validated on the basis of a comparison with measured movements of an alfalfa crop canopy. It is also compared with the outputs of a linear stability analysis. The model is shown to reproduce the well-known phenomenon of ‘honami’ which is typical of wave-like crop motions on windy days. The wavelength of the main coherent waving patches, extracted using a bi-orthogonal decomposition (BOD) of the crop velocity fields, is in agreement with that deduced from video recordings. The main spatial and temporal characteristics of these waving patches exhibit the same variation with mean wind velocity as that observed with the measurements. However they differ from the coherent eddy structures of the wind flow at canopy top, so that coherent waving patches cannot be seen as direct signatures of coherent eddy structures. Finally, it is shown that the impact of crop motion on the wind dynamics is negligible for current wind speed values. No lock-in mechanism of coherent eddy structures on plant motion is observed, in contradiction with the linear stability analysis. This discrepancy may be attributed to the presence of a nonlinear saturation mechanism in LES.

Thermoacoustic Instability Model With Porous Media: Linear Stability Analysis and the Impact of Porous Media

2018 ◽  
Author(s):  
Cody S. Dowd ◽  
Joseph W. Meadows
Keyword(s):  
Growth Rate ◽  
Porous Media ◽  
Stability Analysis ◽  
Frequency Shift ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Growth Rates ◽  
Thermoacoustic Instability ◽  
The Stability ◽  
The Impact

Lean premixed (LPM) combustion systems are susceptible to thermoacoustic instability, which occurs when acoustic pressure oscillations are in phase with the unsteady heat release rates. Porous media has inherent acoustic damping properties, and has been shown to mitigate thermoacoustic instability; however, theoretical models for predicting thermoacoustic instability with porous media do not exist. In the present study, a 1-D model has been developed for the linear stability analysis of the longitudinal modes for a series of constant cross-sectional area ducts with porous media using a n-Tau flame transfer function. By studying the linear regime, the prediction of acoustic growth rates and subsequently the stability of the system is possible. A transfer matrix approach is used to solve for acoustic perturbations of pressure and velocity, stability growth rate, and frequency shift without and with porous media. The Galerkin approximation is used to approximate the stability growth rate and frequency shift, and it is compared to the numerical solution of the governing equations. Porous media is modeled using the following properties: porosity, flow resistivity, effective bulk modulus, and structure factor. The properties of porous media are systematically varied to determine the impact on the eigenfrequencies and stability growth rates. Porous media is shown to increase the stability domain for a range of time delays (Tau) compared to similar cases without porous media.

Impact of PVC Dynamics on Shear Layer Response in a Swirling Jet

2017 ◽  
Author(s):  
Mark Frederick ◽  
Joshua Dudash ◽  
Jacqueline O’Connor ◽  
Kiran Manoharan ◽  
Santosh Hemchandra ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Shear Layer ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Combustion Instability ◽  
Forced Response ◽  
Coupling Mechanism ◽  
Longitudinal Acoustic ◽  
Acoustic Forcing ◽  
The Impact

Combustion instability, or the coupling between flame heat release rate oscillations and combustor acoustics, is a significant issue in the operation of gas turbine combustors. This coupling is often driven by oscillations in the flow field. Shear layer roll-up, in particular, has been shown to drive longitudinal combustion instability in a number of systems, including both laboratory and industrial combustors. One method for suppressing combustion instability would be to suppress the receptivity of the shear layer to acoustic oscillations, severing the coupling mechanism between the acoustics and the flame. Previous work suggested that the existence of a precessing vortex core (PVC) may suppress the receptivity of the shear layer, and the goal of this study is to first, confirm that this suppression is occurring, and second, understand the mechanism by which the PVC suppresses the shear layer receptivity. In this paper, we couple experiment with linear stability analysis to determine whether a PVC can suppress shear layer receptivity to longitudinal acoustic modes in a non-reacting swirling flow at a range of swirl numbers. The shear layer response to the longitudinal acoustic forcing manifests as an m = 0 mode since the acoustic field is axisymmetric. The PVC has been shown both in experiment and linear stability analysis to have m = 1 and m = −1 modal content. By comparing the relative magnitude of the m = 0 and m = −1,1 modes, we quantify the impact that the PVC has on the shear layer response. The mechanism for shear layer response is determined using companion forced response analysis, where the shear layer disturbance growth rates mirror the experimental results. Differences in shear layer thickness and azimuthal velocity profiles drive the suppression of the shear layer receptivity to acoustic forcing.

Thermoacoustic Instability Model With Porous Media: Linear Stability Analysis and the Impact of Porous Media

2018 ◽  
Vol 141 (4) ◽  
Author(s):  
Cody S. Dowd ◽  
Joseph W. Meadows
Keyword(s):  
Growth Rate ◽  
Porous Media ◽  
Stability Analysis ◽  
Frequency Shift ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Growth Rates ◽  
Thermoacoustic Instability ◽  
The Stability ◽  
The Impact

Lean premixed (LPM) combustion systems are susceptible to thermoacoustic instability, which occurs when acoustic pressure oscillations are in phase with the unsteady heat release rates. Porous media has inherent acoustic damping properties and has been shown to mitigate thermoacoustic instability; however, theoretical models for predicting thermoacoustic instability with porous media do not exist. In the present study, a one-dimensional (1D) model has been developed for the linear stability analysis of the longitudinal modes for a series of constant cross-sectional area ducts with porous media using a n-Tau flame transfer function (FTF). By studying the linear regime, the prediction of acoustic growth rates and subsequently the stability of the system is possible. A transfer matrix approach is used to solve for acoustic perturbations of pressure and velocity, stability growth rate, and frequency shift without and with porous media. The Galerkin approximation is used to approximate the stability growth rate and frequency shift, and it is compared to the numerical solution of the governing equations. Porous media is modeled using the following properties: porosity, flow resistivity, effective bulk modulus, and structure factor. The properties of porous media are systematically varied to determine the impact on the eigenfrequencies and stability growth rates. Porous media is shown to increase the stability domain for a range of time delays (Tau) compared to similar cases without porous media.

Effect of Heat Transfer on Pipe Flow Stability

2017 ◽  
Author(s):  
Ce Zhang ◽  
Wei Ma ◽  
Wensheng Yu ◽  
Jinfang Teng
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Flow Field ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Pipe Flow ◽  
Cfd Simulation ◽  
Stokes Equations ◽  
Flow Stability ◽  
Global Mode

The compressibility of flow field has an important effect on flow stability. However, when the compressibility is considered, the effect of Mach number is often considered while the effect of heat transfer is always neglected in the existing flow stability studies. Linear stability analysis tools based on compressible Orr-Sommerfeld (O-S) equations and linearized Navier-Stokes equations in cylindrical coordinate system are established in this paper. These equations are numerically solved by using Chebyshev spectral collocation method and pseudo-modes are eliminated. Linear stability analysis of pipe flow with heat transfer whose average flow field is obtained by CFD simulation is carried out. The results show that for spatial modes, the heating effect of the wall makes pipe flow more unstable, while cooling effect of the wall makes pipe flow more stable. For global modes of pipe flow, the frequency of global mode decreases when the wall cools the flow and the decrease of mean temperature of pipe flow leads to the improvement of global mode stability.

Sign in / Sign up

Export Citation Format

Share Document