MHD effects and heat transfer for the UCM fluid along with Joule heating and thermal radiation using Cattaneo-Christov heat flux model

The flow characteristic of fluid at low Prandtl number is of continued interest in the nuclear industry because liquid metals are to be used in the next-generation nuclear power reactors. In this work we performed direct numerical simulation (DNS) for turbulent channel flow with fluid of low Prandtl number. The Prandtl number was set to 0.025, which is representative of the behavior of liquid metals. Constant heat flux was imposed on the walls to study heat transfer behavior, with different boundary conditions for temperature fluctuation. The bulk Reynolds number was set as high as 50,000, with a corresponding friction Reynolds number of 1,200, which is closer to the situation in a reactor or a heat exchanger than used in normally available databases. Budgets for turbulent variables were computed and compared with predictions from several RANS turbulence models. In particular, the Algebraic Heat Flux Model (AHFM) has been the focus of this comparison with DNS data. The comparisons highlight some shortcomings of AHFM along with potential improvements.

Download Full-text

Cattaneo–Christov heat flux model on Blasius–Rayleigh–Stokes flow through a transitive magnetic field and Joule heating

Physica A Statistical Mechanics and its Applications ◽

10.1016/j.physa.2019.123991 ◽

2020 ◽

Vol 548 ◽

pp. 123991 ◽

Cited By ~ 5

Author(s):

M. Gnaneswara Reddy ◽

M.V. V. N.L. Sudha Rani ◽

K. Ganesh Kumar ◽

B.C. Prasannakumar ◽

Ali J. Chamkha

Keyword(s):

Magnetic Field ◽

Heat Flux ◽

Joule Heating ◽

Stokes Flow ◽

Flux Model ◽

Flow Through ◽

Heat Flux Model

Download Full-text

Free convective heat transfer in Jeffrey fluid with suspended nanoparticles and Cattaneo–Christov heat flux

Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanomaterials Nanoengineering and Nanosystems ◽

10.1177/2397791420912628 ◽

2020 ◽

Vol 234 (3-4) ◽

pp. 99-114

Author(s):

B Vasu ◽

Atul Kumar Ray ◽

Rama SR Gorla

Keyword(s):

Heat Transfer ◽

Heat Flux ◽

Surface Temperature ◽

Vertical Wall ◽

Physical Parameters ◽

Local Similarity ◽

Species Concentration ◽

Flux Model ◽

Jeffrey Nanofluid ◽

Heat Flux Model

Free convection flow of Jeffrey nanofluid past a vertical plate with sinusoidal variations of surface temperature and species concentration is presented. The study of heat transfer and nanofluid transport has been done by employing Cattaneo–Christov heat flux model and Buongiorno model, respectively. Equations governing the flow are non-dimensionalized using appropriate transformations. Furthermore, the method of local similarity and local non-similarity is used to reduce the equations into non-linear coupled system of equations which are then solved by homotopy analysis method. The obtained results are validated by comparing with the existing results available in the literature. The numerical results are found to be in good agreement. The effects of varying the physical parameters such as Deborah Number, Prandtl number, Schmidt number, thermophoresis parameter, Brownian motion parameter and buoyancy ratio parameter are obtained and presented graphically. The effect of sinusoidal variation of surface temperature and species concentration on the skin friction coefficient, Nusselt number and Sherwood number is also shown. Velocity for Jeffrey nanofluid is more than the Newtonian nanofluid while temperature and nanoparticle concentration for Jeffrey nanofluid is less than the Newtonian nanofluid. Raising value of thermal relaxation times leads to an increase in the heat transfer coefficient. It is observed that temperature of Cattaneo–Christov heat flux model is less than that in classical Fourier’s model away from the vertical wall. These types of boundary layer flow problems are found in vertical film solar energy collector, grain storage, transportation and power generation, thermal insulation, gas production, petroleum resources, geothermal reservoirs.

Download Full-text

Heat Transfer Enhancement Feature of the Non-Fourier Cattaneo-Christov Heat Flux Model

Journal of Heat Transfer ◽

10.1115/1.4051671 ◽

2021 ◽

Author(s):

Mustafa Türkyilmazoglu

Keyword(s):

Heat Transfer ◽

Heat Flux ◽

Heat Transfer Enhancement ◽

Transfer Rate ◽

Transfer Enhancement ◽

Numerical Studies ◽

Flux Model ◽

Heat Flux Model ◽

Present Effort ◽

Enhancement Property

Abstract Cattaneo-Christov heat flux model was proposed to remedy the weakness of the traditional Fourier heat flux model in order to maintain the finite travel time of heat. The literature is replete with numerical studies to understand the heat transfer enhancement property. The present effort is to provide a mathematical rigor and to analytically demonstrate why the new model should act towards cooling and thus, in the way of enhancing the heat transfer rate from the surfaces. The derived and presented formulae here prove this assertion through comparison with a few selected examples from the open literature.

Download Full-text