On the use of terrestrial laser scanner for deformation analysis of the Talaga Bodas Crater West Java (Indonesia)

2016 ◽  
Author(s):  
Irwan Gumilar ◽  
Muhammad N. A. Basith ◽  
Hasanuddin Z. Abidin ◽  
Nia Haerani
Keyword(s):  
Laser Scanner ◽  
Deformation Analysis ◽  
Terrestrial Laser Scanner ◽  
West Java

Landslide monitoring using terrestrial laser scanner and robotic total station in Rancabali, West Java (Indonesia)

2017 ◽  
Author(s):  
Irwan Gumilar ◽  
Alif Fattah ◽  
Hasanuddin Z. Abidin ◽  
Vera Sadarviana ◽  
Nabila S. E. Putri ◽  
...  
Keyword(s):  
Laser Scanner ◽  
Landslide Monitoring ◽  
Terrestrial Laser Scanner ◽  
West Java ◽  
Total Station ◽  
Robotic Total Station

The Horizontal Deformation Analysis of High-rise Buildings

2017 ◽  
Author(s):  
Žymantas Gražulis ◽  
Boleslovas Krikštaponis ◽  
Algirdas Neseckas ◽  
Darius Popovas ◽  
Raimundas Putrimas ◽  
...  
Keyword(s):  
Power Plants ◽  
Laser Scanning ◽  
Thermal Power ◽  
Laser Scanner ◽  
Deformation Analysis ◽  
Terrestrial Laser Scanner ◽  
Horizontal Deformation ◽  
Cloud Data ◽  
High Rise ◽  
Cloud Data Processing

The horizontal deformation analysis of high-rise buildings, quite often is complicated because buildings like chimneys, towers and etc, have complex and asymmetric shapes, consequently there is not always the possibility to apply the method of single points motion analysis. Furthermore, the horizontal deformation analysis is complicated using standard measurement methods like measurements with electronic total stations or optical theodolites. In such case the terrestrial laser scanner could be superior to traditional measurements. However, the terrestrial laser scanner still not widely used to survey building horizontal deformations using high precision measurements. The main aim of this work is to determine the suitability to measure deflections of buildings from the vertical using terrestrial laser scanners and to investigate point cloud data processing. Measurements of horizontal deformation were carried out using the over ground laser scanner and electronic total station. Horizontal deformations of chimneys of thermal power plants were investigated using corresponding methods. Deformation indicators and evaluated measurement accuracies between different methods were compared. Data analysis of terrestrial laser scanning is more complex, time consuming and requires sophisticated hardware resources in comparison with the traditional methods, however results are much more detailed and informative.

Robust external calibration of terrestrial laser scanner and digital camera for structural monitoring

2019 ◽  
Vol 13 (2) ◽  
pp. 105-134 ◽  
Author(s):  
Mohammad Omidalizarandi ◽  
Boris Kargoll ◽  
Jens-André Paffenholz ◽  
Ingo Neumann
Keyword(s):  
Em Algorithm ◽  
Laser Scanner ◽  
Digital Camera ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Deformation Analysis ◽  
Terrestrial Laser Scanner ◽  
External Calibration ◽  
3D Point Clouds ◽  
Calibration Parameters

Abstract In the last two decades, the integration of a terrestrial laser scanner (TLS) and digital photogrammetry, besides other sensors integration, has received considerable attention for deformation monitoring of natural or man-made structures. Typically, a TLS is used for an area-based deformation analysis. A high-resolution digital camera may be attached on top of the TLS to increase the accuracy and completeness of deformation analysis by optimally combining points or line features extracted both from three-dimensional (3D) point clouds and captured images at different epochs of time. For this purpose, the external calibration parameters between the TLS and digital camera needs to be determined precisely. The camera calibration and internal TLS calibration are commonly carried out in advance in the laboratory environments. The focus of this research is to highly accurately and robustly estimate the external calibration parameters between the fused sensors using signalised target points. The observables are the image measurements, the 3D point clouds, and the horizontal angle reading of a TLS. In addition, laser tracker observations are used for the purpose of validation. The functional models are determined based on the space resection in photogrammetry using the collinearity condition equations, the 3D Helmert transformation and the constraint equation, which are solved in a rigorous bundle adjustment procedure. Three different adjustment procedures are developed and implemented: (1) an expectation maximization (EM) algorithm to solve a Gauss-Helmert model (GHM) with grouped t-distributed random deviations, (2) a novel EM algorithm to solve a corresponding quasi-Gauss-Markov model (qGMM) with t-distributed pseudo-misclosures, and (3) a classical least-squares procedure to solve the GHM with variance components and outlier removal. The comparison of the results demonstrates the precise, reliable, accurate and robust estimation of the parameters in particular by the second and third procedures in comparison to the first one. In addition, the results show that the second procedure is computationally more efficient than the other two.

scholarly journals Deformation Analysis Using B-Spline Surface with Correlated Terrestrial Laser Scanner Observations—A Bridge Under Load

2020 ◽  
Vol 12 (5) ◽  
pp. 829 ◽  
Author(s):  
Gaël Kermarrec ◽  
Boris Kargoll ◽  
Hamza Alkhatib
Keyword(s):  
Laser Scanner ◽  
Point Clouds ◽  
Testing Procedure ◽  
Local Deformation ◽  
Measurement Noise ◽  
Deformation Analysis ◽  
Terrestrial Laser Scanner ◽  
B Spline ◽  
Set Up ◽  
The Impact

The choice of an appropriate metric is mandatory to perform deformation analysis between two point clouds (PC)—the distance has to be trustworthy and, simultaneously, robust against measurement noise, which may be correlated and heteroscedastic. The Hausdorff distance (HD) or its averaged derivation (AHD) are widely used to compute local distances between two PC and are implemented in nearly all commercial software. Unfortunately, they are affected by measurement noise, particularly when correlations are present. In this contribution, we focus on terrestrial laser scanner (TLS) observations and assess the impact of neglecting correlations on the distance computation when a mathematical approximation is performed. The results of the simulations are extended to real observations from a bridge under load. Highly accurate laser tracker (LT) measurements were available for this experiment: they allow the comparison of the HD and AHD between two raw PC or between their mathematical approximations regarding reference values. Based on these results, we determine which distance is better suited in the case of heteroscedastic and correlated TLS observations for local deformation analysis. Finally, we set up a novel bootstrap testing procedure for this distance when the PC are approximated with B-spline surfaces.

scholarly journals COMPARISON OF TARGET- AND MUTUAL INFORMATON BASED CALIBRATION OF TERRESTRIAL LASER SCANNER AND DIGITAL CAMERA FOR DEFORMATION MONITORING

2015 ◽  
Vol XL-1-W5 ◽  
pp. 559-564 ◽  
Author(s):  
M. Omidalizarandi ◽  
I. Neumann
Keyword(s):  
Laser Scanner ◽  
Digital Camera ◽  
Deformation Monitoring ◽  
Sensor System ◽  
Deformation Analysis ◽  
Accurate Estimation ◽  
Terrestrial Laser Scanner ◽  
Ongoing Research ◽  
Extrinsic Calibration ◽  
Advantages And Disadvantages

In the current state-of-the-art, geodetic deformation analysis of natural and artificial objects (e.g. dams, bridges,...) is an ongoing research in both static and kinematic mode and has received considerable interest by researchers and geodetic engineers. In this work, due to increasing the accuracy of geodetic deformation analysis, a terrestrial laser scanner (TLS; here the Zoller+Fröhlich IMAGER 5006) and a high resolution digital camera (Nikon D750) are integrated to complementarily benefit from each other. In order to optimally combine the acquired data of the hybrid sensor system, a highly accurate estimation of the extrinsic calibration parameters between TLS and digital camera is a vital preliminary step. Thus, the calibration of the aforementioned hybrid sensor system can be separated into three single calibrations: calibration of the camera, calibration of the TLS and extrinsic calibration between TLS and digital camera. In this research, we focus on highly accurate estimating extrinsic parameters between fused sensors and target- and targetless (mutual information) based methods are applied. In target-based calibration, different types of observations (image coordinates, TLS measurements and laser tracker measurements for validation) are utilized and variance component estimation is applied to optimally assign adequate weights to the observations. Space resection bundle adjustment based on the collinearity equations is solved using Gauss-Markov and Gauss-Helmert model. Statistical tests are performed to discard outliers and large residuals in the adjustment procedure. At the end, the two aforementioned approaches are compared and advantages and disadvantages of them are investigated and numerical results are presented and discussed.

INVESTIGATIONS OF THE BALTIC SEA COASTAL ZONE ABOVE-WATER PART TOPOGRAPHY DYNAMICS BY MEANS OF TERRESTRIAL LASER SCANNER (SVETLOGORSK CITY, KALININGRAD REGION)

2017 ◽  
Author(s):  
Nikolay Lugovoy ◽  
Nikolay Lugovoy ◽  
Askar Ilyasov ◽  
Askar Ilyasov ◽  
Elena Pronina ◽  
...  
Keyword(s):  
Baltic Sea ◽  
Coastal Zone ◽  
Coastal Erosion ◽  
Laser Scanner ◽  
Terrestrial Laser Scanner ◽  
The Baltic Sea ◽  
Coastal Dynamics ◽  
Kaliningrad Region ◽  
The Baltic

The paper describes application of the terrestrial laser scanner for investigation of coastal dynamics of the Svetlogorskaya Bay, Baltic Sea. Methods of investigation and results of surveys repeated over the two consecutive years for quantification of coastal erosion and slope processes within the coastal zone are presented.

INSIGHTS FROM REPEATED TERRESTRIAL LASER-SCANNER SURVEYS OF CHANNEL-WALL EROSION ALONG THE SOUTH RIVER, VIRGINIA

2020 ◽  
Author(s):  
Collin Megee ◽  
◽  
Michael O'Neal ◽  
Joseph Clemens ◽  
Erica McMaster ◽  
...  
Keyword(s):  
Channel Wall ◽  
Laser Scanner ◽  
Terrestrial Laser Scanner ◽  
The South

scholarly journals Fitting Terrestrial Laser Scanner Point Clouds with T-Splines: Local Refinement Strategy for Rigid Body Motion

2021 ◽  
Vol 13 (13) ◽  
pp. 2494
Author(s):  
Gaël Kermarrec ◽  
Niklas Schild ◽  
Jan Hartmann
Keyword(s):  
Point Cloud ◽  
Goodness Of Fit ◽  
Laser Scanner ◽  
Point Clouds ◽  
Statistical Testing ◽  
Computational Time ◽  
Terrestrial Laser Scanner ◽  
Reference Surface ◽  
Local Refinement ◽  
Surface Approximation

T-splines have recently been introduced to represent objects of arbitrary shapes using a smaller number of control points than the conventional non-uniform rational B-splines (NURBS) or B-spline representatizons in computer-aided design, computer graphics and reverse engineering. They are flexible in representing complex surface shapes and economic in terms of parameters as they enable local refinement. This property is a great advantage when dense, scattered and noisy point clouds are approximated using least squares fitting, such as those from a terrestrial laser scanner (TLS). Unfortunately, when it comes to assessing the goodness of fit of the surface approximation with a real dataset, only a noisy point cloud can be approximated: (i) a low root mean squared error (RMSE) can be linked with an overfitting, i.e., a fitting of the noise, and should be correspondingly avoided, and (ii) a high RMSE is synonymous with a lack of details. To address the challenge of judging the approximation, the reference surface should be entirely known: this can be solved by printing a mathematically defined T-splines reference surface in three dimensions (3D) and modeling the artefacts induced by the 3D printing. Once scanned under different configurations, it is possible to assess the goodness of fit of the approximation for a noisy and potentially gappy point cloud and compare it with the traditional but less flexible NURBS. The advantages of T-splines local refinement open the door for further applications within a geodetic context such as rigorous statistical testing of deformation. Two different scans from a slightly deformed object were approximated; we found that more than 40% of the computational time could be saved without affecting the goodness of fit of the surface approximation by using the same mesh for the two epochs.

Sign in / Sign up

Export Citation Format

Share Document