scholarly journals Large-eddy simulation of 3-D corner separation in a linear compressor cascade

2015 ◽  
Vol 27 (8) ◽  
pp. 085105 ◽  
Author(s):  
Feng Gao ◽  
Wei Ma ◽  
Gherardo Zambonini ◽  
Jérôme Boudet ◽  
Xavier Ottavy ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Corner Separation ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Linear Compressor Cascade

Numerical Investigation of Intermittent Corner Separation in a Linear Compressor Cascade

2016 ◽  
Author(s):  
Wei Ma ◽  
Feng Gao ◽  
Xavier Ottavy ◽  
Lipeng Lu ◽  
A. J. Wang
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Leading Edge ◽  
Suction Side ◽  
Detached Eddy Simulation ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Corner Separation ◽  
Eddy Simulation ◽  
Linear Compressor Cascade

Recently bimodal phenomenon in corner separation has been found by Ma et al. (Experiments in Fluids, 2013, doi:10.1007/s00348-013-1546-y). Through detailed and accurate experimental results of the velocity flow field in a linear compressor cascade, they discovered two aperiodic modes exist in the corner separation of the compressor cascade. This phenomenon reflects the flow in corner separation is high intermittent, and large-scale coherent structures corresponding to two modes exist in the flow field of corner separation. However the generation mechanism of the bimodal phenomenon in corner separation is still unclear and thus needs to be studied further. In order to obtain instantaneous flow field with different unsteadiness and thus to analyse the mechanisms of bimodal phenomenon in corner separation, in this paper detached-eddy simulation (DES) is used to simulate the flow field in the linear compressor cascade where bimodal phenomenon has been found in previous experiment. DES in this paper successfully captures the bimodal phenomenon in the linear compressor cascade found in experiment, including the locations of bimodal points and the development of bimodal points along a line that normal to the blade suction side. We infer that the bimodal phenomenon in the corner separation is induced by the strong interaction between the following two facts. The first is the unsteady upstream flow nearby the leading edge whose angle and magnitude fluctuate simultaneously and significantly. The second is the high unsteady separation in the corner region.

Unsteady Pressure Investigations of Corner Separated Flow in a Linear Compressor Cascade

2015 ◽  
Author(s):  
Gherardo Zambonini ◽  
Xavier Ottavy
Keyword(s):  
Transfer Functions ◽  
Leading Edge ◽  
Positive Pressure ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Linear Compressor ◽  
Corner Separation ◽  
Unsteady Pressure ◽  
Linear Compressor Cascade ◽  
End Wall

The aim of this work is to present detailed unsteady pressure measurements of three-dimensional flow field in a NACA 65 linear compressor cascade. Chord-based Reynolds number of 382000 and incidence angle of 4 degrees were chosen as target configuration of the rig, which clearly presents the corner separation phenomenon at the juncture of the blade suction side and the end-wall. Concerning the experiments, a characterization of the mean and fluctuating component of wall static pressure on the surface of a specially developed blade is achieved at first. This fluctuating component is investigated utilizing nineteen high sensitivity condenser microphones plugged into blade cavities which have been carefully calibrated. Transfer functions obtained by calibration are exploited to reconstruct the time-dependent pressure signal and finally statistics, conditional ensemble averages, coherence and spectra analyses of fluctuations are presented in order to investigate the unsteady characteristics of the corner separation. High values of root mean square are individuated near the leading edge and in the separation region on the suction surface of the blade. Skewness and kurtosis show an intermittent behavior of the separation onset, which moves upstream and downstream on the suction surface. This intermittency of the separation line is probably linked with the existence of a bimodal behavior of the size of the corner separation. The analyses of coherence and conditional ensemble average between the signals at the leading edge and at the onset of the separation suggest a critical influence of angle and velocity of the incoming end-wall boundary layer on the positive pressure signatures of the shear layer, which characterize the inception of the separation.

Application of High-Resolution Large Eddy Simulation to Simplified Turbomachinery Flows

2016 ◽  
Author(s):  
Susumu Teramoto ◽  
Takuya Ouchi ◽  
Hiroki Sanada ◽  
Koji Okamoto
Keyword(s):  
Boundary Layer ◽  
High Resolution ◽  
Turbulent Boundary Layer ◽  
Large Eddy Simulation ◽  
Reynolds Stress ◽  
Sudden Expansion ◽  
Compressor Cascade ◽  
Rans Model ◽  
Eddy Simulation ◽  
Large Eddy

Fully resolved large eddy simulation (LES) is applied to two simple geometry flowfields with well-defined boundary conditions. The LES results are compared with simulations based on a Reynolds-averaged Navier-Stokes (RANS) model with turbulence, and pros and cons of using high-resolution LES for turbomachinery flows are discussed. One flow is a linear compressor cascade flow composed of the tip section of GE rotor B at Rec = 4 × 105 with a clearance, and the other is a Mach 1.76 supersonic turbulent boundary layer at Reδ = 5000 that laminerizes through a 12-degree expansion corner. The grids are prepared fine enough to resolve the turbulent boundary layer through a grid sensitivity study. The liner cascade result shows that all the turbulent shear layers and boundary layers including those in the small tip clearance are well resolved with 800 million grid points. The Reynolds stress derived from the LES results are compared directly with those predicted from the Spalart-Allmaras one-equation RANS turbulence model. The two results agreed qualitatively well except for the shear layer surrounding the tip leakage vortex, demonstrating that the RANS model performs well at least for flowfields near the design condition. From the simulation of the turbulent boundary layer experiencing sudden expansion, noticeable decreases of both Reynolds stress and local friction coefficient were observed, showing that the turbulent boundary layer has relaminarized through the sudden expansion. The boundary layer downstream of the expansion exhibits a nonequilibrium condition and was different from the laminar boundary layer.

Adaptive Detached Eddy Simulation of End-Wall Flow in a Linear Compressor Cascade

2020 ◽  
Author(s):  
Zifei Yin
Keyword(s):  
Pressure Coefficient ◽  
Detached Eddy Simulation ◽  
Compressor Cascade ◽  
Local Flow ◽  
Linear Compressor ◽  
Eddy Simulation ◽  
Wall Flow ◽  
Linear Compressor Cascade ◽  
End Wall ◽  
Des Model

Abstract Delayed detached eddy simulations and wall-modeled eddy simulations using the adaptive DES model were performed to simulate corner separation in the Ecole Centrale de Lyon linear compressor cascade. The adaptive DES model directly uses length scale to define eddy viscosity, which makes it nature to compute the model constant CDES dynamically. The dynamic procedure adapts viscosity to local flow and grid. Delayed detached eddy simulations, with and without the dynamic procedure, were performed to demonstrate the benefit of adapting viscosity to local flow. Recycling method was adopted to generate inflow unsteady turbulent boundary layer for wall-modeled eddy simulations. The wall-modeled eddy simulation showed improvement over delayed-DES, in terms of static pressure coefficient around the blade and total pressure loss at downstream locations.

Sign in / Sign up

Export Citation Format

Share Document