Spin orientation driven static and dynamic magnetic process in amorphous FeCoBSi thin films

One measure of the maturity of a device technology is the ease and reliability of applying contact metallurgy. Compared to metal contact of silicon, the status of GaAs metallization is still at its primitive stage. With the advent of GaAs MESFET and integrated circuits, very stringent requirements were placed on their metal contacts. During the past few years, extensive researches have been conducted in the area of Au-Ge-Ni in order to lower contact resistances and improve uniformity. In this paper, we report the results of TEM study of interfacial reactions between Ni and GaAs as part of the attempt to understand the role of nickel in Au-Ge-Ni contact of GaAs.N-type, Si-doped, (001) oriented GaAs wafers, 15 mil in thickness, were grown by gradient-freeze method. Nickel thin films, 300Å in thickness, were e-gun deposited on GaAs wafers. The samples were then annealed in dry N2 in a 3-zone diffusion furnace at temperatures 200°C - 600°C for 5-180 minutes. Thin foils for TEM examinations were prepared by chemical polishing from the GaA.s side. TEM investigations were performed with JE0L- 100B and JE0L-200CX electron microscopes.

Download Full-text

Studies on Water in the Hydration Chamber of a Modified Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069715 ◽

1970 ◽

Vol 28 ◽

pp. 544-545

Author(s):

R. C. Moretz ◽

G. G. Hausner ◽

D. F. Parsons

Keyword(s):

Thin Film ◽

Thin Films ◽

Electron Microscope ◽

Steady State ◽

Room Temperature ◽

Small Mass ◽

Equilibrium Pressure ◽

Biological Objects ◽

Mechanical Pump ◽

Differential Pumping

Use of the electron microscope to examine wet objects is possible due to the small mass thickness of the equilibrium pressure of water vapor at room temperature. Previous attempts to examine hydrated biological objects and water itself used a chamber consisting of two small apertures sealed by two thin films. Extensive work in our laboratory showed that such films have an 80% failure rate when wet. Using the principle of differential pumping of the microscope column, we can use open apertures in place of thin film windows.Fig. 1 shows the modified Siemens la specimen chamber with the connections to the water supply and the auxiliary pumping station. A mechanical pump is connected to the vapor supply via a 100μ aperture to maintain steady-state conditions.

Download Full-text

Nucleation and Early Growth of Sputtered thin Films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069570 ◽

1970 ◽

Vol 28 ◽

pp. 516-517

Author(s):

Dudley M. Sherman ◽

Thos. E. Hutchinson

Keyword(s):

Thin Films ◽

Electron Beam ◽

Ion Beam ◽

Ion Source ◽

Water Cooling ◽

Stages Of Growth ◽

Lens Assembly ◽

Microscope Technique ◽

Ion Beam Sputter Deposition

The in situ electron microscope technique has been shown to be a powerful method for investigating the nucleation and growth of thin films formed by vacuum vapor deposition. The nucleation and early stages of growth of metal deposits formed by ion beam sputter-deposition are now being studied by the in situ technique.A duoplasmatron ion source and lens assembly has been attached to one side of the universal chamber of an RCA EMU-4 microscope and a sputtering target inserted into the chamber from the opposite side. The material to be deposited, in disc form, is bonded to the end of an electrically isolated copper rod that has provisions for target water cooling. The ion beam is normal to the microscope electron beam and the target is placed adjacent to the electron beam above the specimen hot stage, as shown in Figure 1.

Download Full-text

Macromolecular structures of biological specimens are not obscured by controlled osmium impregnation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100076639 ◽

1983 ◽

Vol 41 ◽

pp. 606-607

Author(s):

Klaus-Ruediger Peters ◽

Samuel A. Green

Keyword(s):

Thin Films ◽

Electrical Conductivity ◽

Critical Point ◽

Metal Films ◽

High Magnification ◽

Osmium Impregnation ◽

Instrumental Resolution ◽

20 Nm ◽

Continuous Metal

High magnification imaging of macromolecules on metal coated biological specimens is limited only by wet preparation procedures since recently obtained instrumental resolution allows visualization of topographic structures as smal l as 1-2 nm. Details of such dimensions may be visualized if continuous metal films with a thickness of 2 nm or less are applied. Such thin films give sufficient contrast in TEM as well as in SEM (SE-I image mode). The requisite increase in electrical conductivity for SEM of biological specimens is achieved through the use of ligand mediated wet osmiuum impregnation of the specimen before critical point (CP) drying. A commonly used ligand is thiocarbohvdrazide (TCH), first introduced to TEM for en block staining of lipids and glvcomacromolecules with osmium black. Now TCH is also used for SEM. However, after ligand mediated osinification nonspecific osmium black precipitates were often found obscuring surface details with large diffuse aggregates or with dense particular deposits, 2-20 nm in size. Thus, only low magnification work was considered possible after TCH appl ication.

Download Full-text

The Precipitation of Si in AlCuSi Thin Films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070618 ◽

1973 ◽

Vol 31 ◽

pp. 34-35 ◽

Cited By ~ 1

Author(s):

R. M. Anderson

Keyword(s):

Electron Microscopy ◽

Thin Films ◽

Heat Treatment ◽

Solid Solution ◽

Integrated Circuit ◽

Copper Film ◽

Solution Concentration ◽

X Ray ◽

Silicon Thin Films ◽

Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

Download Full-text

A standard for transmission electron spectroscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100109793 ◽

1978 ◽

Vol 36 (1) ◽

pp. 530-531 ◽

Cited By ~ 1

Author(s):

Dennis Maher ◽

David Joy ◽

Peggy Mochel

Keyword(s):

Thin Films ◽

Electron Spectroscopy ◽

Host Lattice ◽

Single Element ◽

Multicomponent Systems ◽

Transmission Electron ◽

Major Interest ◽

Standard Specimens ◽

Forms Of Carbon ◽

Electron Energy Loss

A variety of standard specimens is needed in order to systematically investigate the instrumentation, specimen, data reduction and quantitation variables in electron energy-loss spectroscopy (EELS). Pure single element specimens (e.g. various forms of carbon) have received considerable attention to date but certain elements of interest cannot be prepared directly as thin films. Since studies of the first and second row elements in two- or multicomponent systems will be of considerable importance in microanalysis using EELS, there is a need for convenient standards containing these species. For many investigations a standard should contain the desired element, or elements, homogeneously dispersed through a suitable matrix and at an accurately known concentration. These conditions may be met by the technique of implantation.Silicon was chosen as the host lattice since its principal ionization energies, EL23 = 98 eV and Ek = 1843 eV, are well removed from the K-edges of most elements of major interest such as boron (Ek = 188 eV), carbon (Ek = 283 eV), nitrogen (Ek = 400 eV) and oxygen (Ek = 532 eV).

Download Full-text

Transmission Electron Microscopy studies of the vacancy ordering in YSI2-X thin films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100087124 ◽

1991 ◽

Vol 49 ◽

pp. 562-563

Author(s):

F.-R. Chen ◽

T. L. Lee ◽

L. J. Chen

Keyword(s):

Crystal Structure ◽

Electron Microscopy ◽

Thin Films ◽

Diffraction Pattern ◽

Annealing Temperature ◽

Lattice Mismatch ◽

Si Substrate ◽

Metal Thin Films ◽

Transmission Electron ◽

Vacancy Ordering

YSi2-x thin films were grown by depositing the yttrium metal thin films on (111)Si substrate followed by a rapid thermal annealing (RTA) at 450 to 1100°C. The x value of the YSi2-x films ranges from 0 to 0.3. The (0001) plane of the YSi2-x films have an ideal zero lattice mismatch relative to (111)Si surface lattice. The YSi2 has the hexagonal AlB2 crystal structure. The orientation relationship with Si was determined from the diffraction pattern shown in figure 1(a) to be and . The diffraction pattern in figure 1(a) was taken from a specimen annealed at 500°C for 15 second. As the annealing temperature was increased to 600°C, superlattice diffraction spots appear at position as seen in figure 1(b) which may be due to vacancy ordering in the YSi2-x films. The ordered vacancies in YSi2-x form a mesh in Si plane suggested by a LEED experiment.

Download Full-text

Analysis of electroless nickel thin films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086854 ◽

1991 ◽

Vol 49 ◽

pp. 510-511 ◽

Cited By ~ 1

Author(s):

C. W. Price ◽

E. F. Lindsey

Keyword(s):

Thin Films ◽

Inertial Confinement Fusion ◽

Electroless Nickel ◽

Inertial Confinement ◽

Plating Bath ◽

X Ray ◽

Nickel Thin Films ◽

Nickel Deposits ◽

Confinement Fusion ◽

Thickness Measurements

Thickness measurements of thin films are performed by both energy-dispersive x-ray spectroscopy (EDS) and x-ray fluorescence (XRF). XRF can measure thicker films than EDS, and XRF measurements also have somewhat greater precision than EDS measurements. However, small components with curved or irregular shapes that are used for various applications in the the Inertial Confinement Fusion program at LLNL present geometrical problems that are not conducive to XRF analyses but may have only a minimal effect on EDS analyses. This work describes the development of an EDS technique to measure the thickness of electroless nickel deposits on gold substrates. Although elaborate correction techniques have been developed for thin-film measurements by x-ray analysis, the thickness of electroless nickel films can be dependent on the plating bath used. Therefore, standard calibration curves were established by correlating EDS data with thickness measurements that were obtained by contact profilometry.

Download Full-text