Eddy current sensor for in-situ monitoring of swelling of Li-ion prismatic cells

2015 ◽  
Author(s):  
Yuri Plotnikov ◽  
Jason Karp ◽  
Aaron Knobloch ◽  
Chris Kapusta ◽  
David Lin
Keyword(s):  
Eddy Current ◽  
In Situ Monitoring ◽  
Current Sensor ◽  
Eddy Current Sensor ◽  
Li Ion

Inspection of Surface Rolled Sintered Gears using Eddy-Current Sensor

2013 ◽  
Vol 133 (5) ◽  
pp. 300-306
Author(s):  
Tsutomu Mizuno ◽  
Yuichi Asato ◽  
Sho Goto ◽  
Takashi Watanabe ◽  
Teruie Takemasu ◽  
...  
Keyword(s):  
Eddy Current ◽  
Current Sensor ◽  
Eddy Current Sensor

scholarly journals Eddy Current Sensor System for Tilting Independent In-Process Measurement of Magnetic Anisotropy

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2652
Author(s):  
Frank Wendler ◽  
Rohan Munjal ◽  
Muhammad Waqas ◽  
Robert Laue ◽  
Sebastian Härtel ◽  
...  
Keyword(s):  
Magnetic Anisotropy ◽  
Eddy Current ◽  
Digital Signal ◽  
Production Equipment ◽  
Sensor System ◽  
Current Sensor ◽  
Cold Forming ◽  
Eddy Current Sensor ◽  
Two Samples ◽  
Internal Mechanical Stress

Modern production equipment is based on the results of quality control as well as process parameters. The magnetic anisotropy of materials is closely connected to internal mechanical stress by the Villari effect, and also to hardening effects due to plastic deformations, and could therefore provide an interesting basis for process control. Nevertheless, the analysis of anisotropic properties is extremely sensitive to sensor and workpiece misalignments, such as tilting. In this work, a novel eddy current sensor system is introduced, performing a non-contact measurement of the magnetic anisotropy of a workpiece and realizing a separation and correction of tilting effects. The measurement principle is demonstrated with the example of two samples with different magnetic anisotropy values induced by cold forming. Both samples are analyzed under different tilt angles between the sensor axis and the surface of the workpiece. In this work, digital signal processing is demonstrated on the acquired raw data in order to differentiate the effects of tilt and of anisotropy, with the use of preliminary results as an example of two prepared samples.

Design and Implement of High-Accuracy On-Line Metal Thickness Measuring Instrument Based on NiosII Processor

2013 ◽  
Vol 834-836 ◽  
pp. 930-934
Author(s):  
Shou Liang Yang ◽  
Bao Liang Yang
Keyword(s):  
Eddy Current ◽  
Low Cost ◽  
High Accuracy ◽  
Resolving Power ◽  
Current Sensor ◽  
Measuring Instrument ◽  
Precision Data ◽  
Eddy Current Sensor ◽  
Metal Thickness ◽  
On Line

The paper proposes a new design of high-accuracy On-line Metal Thickness Measuring Instrument, which was based on EP2C20 series FPGA chip, through adding NiosII soft processor and other interfaces to FPGA, equipped with high precision data collection system and TFT LCD module and so on. The key hardware blocks schematics and components of the RC Oscillation Circuit,eddy current sensor Circuit,rectifier and filter Circuit,A/D converting circuit,FPGA Circuit are described,software flow charts and sample codes are given. According to practice, The measurement range of this system is 1~100 mm and the resolving power is 0.1 μm. degree of linearity is 1%, The system has many features including small volume of hardware, low cost, high detecting precision, convenient operating, high intelligent and so on, leading to broad and bright future. Key words: NiosII processor; eddy current sensor; metal thickness

A Generalized Approach for Failure Detection on Steel Products with the Use of an Eddy-Current Sensor

1989 ◽  
Vol 22 (6) ◽  
pp. 351-355
Author(s):  
T. Cecchin ◽  
D. Sauter ◽  
J. Merckle ◽  
F. Arroyo ◽  
M. Aubrun
Keyword(s):  
Eddy Current ◽  
Failure Detection ◽  
Current Sensor ◽  
Eddy Current Sensor
Sign in / Sign up

Export Citation Format

Share Document