Electric driven instability in a charged drop immersed in a viscous dielectric fluid

2014 ◽  
Vol 116 (2) ◽  
pp. 024903 ◽  
Author(s):  
Touvia Miloh
Keyword(s):  
Dielectric Fluid ◽  
Charged Drop

Effect of Powder-Mixed Dielectric on EDM Process Performance

2020 ◽  
Vol 38 (8A) ◽  
pp. 1226-1235
Author(s):  
Safa R. Fadhil ◽  
Shukry. H. Aghdeab
Keyword(s):  
Silicon Carbide ◽  
High Speed ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
High Speed Steel ◽  
Transformer Oil ◽  
Dielectric Fluid ◽  
Peak Current ◽  
Powder Concentration ◽  
Pulse On Time

Electrical Discharge Machining (EDM) is extensively used to manufacture different conductive materials, including difficult to machine materials with intricate profiles. Powder Mixed Electro-Discharge Machining (PMEDM) is a modern innovation in promoting the capabilities of conventional EDM. In this process, suitable materials in fine powder form are mixed in the dielectric fluid. An equal percentage of graphite and silicon carbide powders have been mixed together with the transformer oil and used as the dielectric media in this work. The aim of this study is to investigate the effect of some process parameters such as peak current, pulse-on time, and powder concentration of machining High-speed steel (HSS)/(M2) on the material removal rate (MRR), tool wear rate (TWR) and the surface roughness (Ra). Experiments have been designed and analyzed using Response Surface Methodology (RSM) approach by adopting a face-centered central composite design (FCCD). It is found that added graphite-silicon carbide mixing powder to the dielectric fluid enhanced the MRR and Ra as well as reduced the TWR at various conditions. Maximum MRR was (0.492 g/min) obtained at a peak current of (24 A), pulse on (100 µs), and powder concentration (10 g/l), minimum TWR was (0.00126 g/min) at (10 A, 100 µs, and 10 g/l), and better Ra was (3.51 µm) at (10 A, 50 µs, and 10 g/l).

The Application of Powder Suspended Dielectric Fluid in Micro-EDM Processes to Reduce Machining Time

2009 ◽  
Vol 1 (3) ◽  
pp. 210-213 ◽  
Author(s):  
Gunawan Prihandana ◽  
Muslim Mahardika ◽  
M. Hamdi ◽  
Kimiyuki Mitsui
Keyword(s):  
Dielectric Fluid ◽  
Micro Edm ◽  
Machining Time

EDM with USM Combination Process of Sintered NdFeB Permanent Magnet

2010 ◽  
Vol 44-47 ◽  
pp. 1066-1069
Author(s):  
Li Li ◽  
Li Ling Qi ◽  
Zong Wei Niu
Keyword(s):  
Permanent Magnet ◽  
Material Removal ◽  
Removal Rate ◽  
Surface Characteristics ◽  
Dielectric Fluid ◽  
Machined Surface ◽  
Combination Process ◽  
Electro Discharge Machining ◽  
Ndfeb Permanent Magnet ◽  
Machining Characteristics

This paper presents an experimental investigation of the machining characteristics of sintered NdFeB permanent magnet using a combination process of electro-discharge machining (EDM) with ultrasonic machining (USM). Concentration of abrasive in the dielectric fluid is changed to explore its effect on the material removal rate (MRR). MRR of EDM /USM, conventional EDM are compared, machined surface characteristics are also compared between them. It is concluded that the combination EDM/USM process can increase the MRR and decrease the thickness of the recast layer. In the combination process, an appropriate abrasive concentration can improve its machining efficiency.

On the interaction between a charged drop and an external acoustic field

2002 ◽  
Vol 47 (3) ◽  
pp. 299-305
Author(s):  
A. I. Grigor’ev ◽  
A. P. Gaibov ◽  
S. O. Shiryaeva
Keyword(s):  
Acoustic Field ◽  
Charged Drop ◽  
External Acoustic Field

Virtual walls for dielectric fluid manipulation through controllable charge deposition

2022 ◽  
Vol 130 ◽  
pp. 110512
Author(s):  
Zheng Gong ◽  
Zhenpeng Su ◽  
Yin Wang ◽  
Xiaofeng Liu ◽  
Bo Zhao ◽  
...  
Keyword(s):  
Dielectric Fluid ◽  
Charge Deposition ◽  
Fluid Manipulation
Sign in / Sign up

Export Citation Format

Share Document