Influence of boron on the microstructural and mechanical properties of Ni53.5Mn26.0Ga20.5 shape memory alloy

2014 ◽  
Author(s):  
M. Ramudu ◽  
A. Satish Kumar ◽  
V. Seshubai ◽  
T. Rajasekharan
Keyword(s):  
Mechanical Properties ◽  
Shape Memory Alloy ◽  
Shape Memory

scholarly journals Experimental and Numerical Analysis of the Mechanical Properties of a Pretreated Shape Memory Alloy Wire in a Self-Centering Steel Brace

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 80
Author(s):  
Bo Zhang ◽  
Sizhi Zeng ◽  
Fenghua Tang ◽  
Shujun Hu ◽  
Qiang Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Energy Dissipation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Loading Rate ◽  
Effective Elastic Modulus ◽  
Maximum Energy ◽  
Numerical Results ◽  
Energy Dissipation Capacity

As a stimulus-sensitive material, the difference in composition, fabrication process, and influencing factors will have a great effect on the mechanical properties of a superelastic Ni-Ti shape memory alloy (SMA) wire, so the seismic performance of the self-centering steel brace with SMA wires may not be accurately obtained. In this paper, the cyclic tensile tests of a kind of SMA wire with a 1 mm diameter and special element composition were tested under multi-working conditions, which were pretreated by first tensioning to the 0.06 strain amplitude for 40 cycles, so the mechanical properties of the pretreated SMA wires can be simulated in detail. The accuracy of the numerical results with the improved model of Graesser’s theory was verified by a comparison to the experimental results. The experimental results show that the number of cycles has no significant effect on the mechanical properties of SMA wires after a certain number of cyclic tensile training. With the loading rate increasing, the pinch effect of the hysteresis curves will be enlarged, while the effective elastic modulus and slope of the transformation stresses in the process of loading and unloading are also increased, and the maximum energy dissipation capacity of the SMA wires appears at a loading rate of 0.675 mm/s. Moreover, with the initial strain increasing, the slope of the transformation stresses in the process of loading is increased, while the effective elastic modulus and slope of the transformation stresses in the process of unloading are decreased, and the maximum energy dissipation capacity appears at the initial strain of 0.0075. In addition, a good agreement between the test and numerical results is obtained by comparing with the hysteresis curves and energy dissipation values, so the numerical model is useful to predict the stress–strain relations at different stages. The test and numerical results will also provide a basis for the design of corresponding self-centering steel dampers.

Mechanical properties of a NiTi-Pd high-temperature shape memory alloy

1994 ◽  
Author(s):  
Kuang-Hsi Wu ◽  
Y. Q. Liu ◽  
Michael J. Maich ◽  
Hsien-Kuei Tseng
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Shape Memory Alloy ◽  
Shape Memory

scholarly journals Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting

2015 ◽  
Vol 18 (suppl 2) ◽  
pp. 35-38 ◽  
Author(s):  
Piter Gargarella ◽  
Cláudio Shyinti Kiminami ◽  
Eric Marchezini Mazzer ◽  
Régis Daniel Cava ◽  
Leonardo Albuquerque Basilio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Selective Laser Melting ◽  
Phase Formation ◽  
Laser Melting

Mechanical properties and scaling laws of polycrystalline CuZr shape memory alloy

2021 ◽  
Vol 130 (15) ◽  
pp. 155106
Author(s):  
Yuhang Zhang ◽  
Jiejie Li ◽  
Yiqun Hu ◽  
Suhang Ding ◽  
Fuying Du ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Scaling Laws

scholarly journals Mechanical Properties of NiTi Shape Memory Alloy Particle/Epoxy Composites

2006 ◽  
Vol 55 (2) ◽  
pp. 230-236 ◽  
Author(s):  
Run-Xin ZHANG ◽  
Qing-Qing NI ◽  
Toshiaki NATSUKI ◽  
Ken KURASHIKI ◽  
Masaharu IWAMOTO
Keyword(s):  
Mechanical Properties ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Epoxy Composites ◽  
Niti Shape Memory Alloy ◽  
Alloy Particle

Effect of Ce addition on mechanical properties and shape memory effect of Cu-14%Al-4.5%Ni shape memory alloy

2020 ◽  
Vol 20 ◽  
pp. 452-460
Author(s):  
Raad Suhail Ahmed Adnan ◽  
Muna Kheither Abbass ◽  
Munther Mohammed AlKubaisy
Keyword(s):  
Mechanical Properties ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect
Sign in / Sign up

Export Citation Format

Share Document