A numerical study of droplet trapping in microfluidic devices

2014 ◽  
Vol 26 (3) ◽  
pp. 032002 ◽  
Author(s):  
Mathias Nagel ◽  
P.-T. Brun ◽  
François Gallaire
Keyword(s):  
Numerical Study ◽  
Microfluidic Devices ◽  
Droplet Trapping

scholarly journals A Numerical Study of Sub-Millisecond Integrated Mix-and-Inject Microfluidic Devices for Sample Delivery at Synchrotron and XFELs

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey
Keyword(s):  
Molecular Dynamics ◽  
Flow Rate ◽  
Numerical Study ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Liquid Jets ◽  
Mixing Efficiency ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Time Required

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

scholarly journals Numerical Study of Joule Heating Effects on Microfluidics Device Reliability in Electrode Based Devices

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5819
Author(s):  
Caffiyar Mohammed Yousuff ◽  
Vineet Tirth ◽  
Mohamed Zackria Ansar Babu Irshad ◽  
Kashif Irshad ◽  
Ali Algahtani ◽  
...  
Keyword(s):  
Cross Sections ◽  
Joule Heating ◽  
Electrode Materials ◽  
Separation Efficiency ◽  
Numerical Study ◽  
Microfluidic Devices ◽  
Cell Loss ◽  
Heating Effects ◽  
Device Reliability ◽  
Micro Channels

In electrode-based microfluidic devices, micro channels having narrow cross sections generate undesirable temperature inside the microfluidic device causing strong thermal distribution (joule heating) that eventually leads to device damage or cell loss. In this work, we investigate the effects of joule heating due to different electrode configuration and found that, electrodes with triangular arrangements produce less heating effect even at applied potential of 30 V, without compromising the performance of the device and separation efficiency. However, certain electrode materials have low thermal gradients but erode the channel quickly thereby affecting the reliability of the device. Our simulation also predicts optimal medium conductivity (10 mS/m with 10 V) for cells to survive inside the channel until they are selectively isolated into the collection outlet. Our investigations will aid the researchers in the designing of efficient and reliable microfluidic devices to overcome joule heating inside the microchannels.

Numerical study of the low-frequency atomic dynamics in a Lennard-Jones glass

1998 ◽  
Vol 77 (2) ◽  
pp. 473-484 ◽  
Author(s):  
M. Sampoli, P. Benassi, R. Dell'Anna,
Keyword(s):  
Numerical Study ◽  
Low Frequency ◽  
Lennard Jones

Numerical simulation of the tree higro-thermal response in forest fire environment

2020 ◽  
pp. 57-65
Author(s):  
Eusébio Conceiçã ◽  
João Gomes ◽  
Maria Manuela Lúcio ◽  
Jorge Raposo ◽  
Domingos Xavier Viegas ◽  
...  
Keyword(s):  
Forest Fire ◽  
Numerical Study ◽  
Thermal Response ◽  
View Factor ◽  
Tree Model ◽  
Pine Tree ◽  
Surface Temperatures ◽  
Fire Environment ◽  
Fire Front ◽  
Heat Exchanges

This paper refers to a numerical study of the hypo-thermal behaviour of a pine tree in a forest fire environment. The pine tree thermal response numerical model is based on energy balance integral equations for the tree elements and mass balance integral equation for the water in the tree. The simulation performed considers the heat conduction through the tree elements, heat exchanges by convection between the external tree surfaces and the environment, heat exchanges by radiation between the flame and the external tree surfaces and water heat loss by evaporation from the tree to the environment. The virtual three-dimensional tree model has a height of 7.5 m and is constituted by 8863 cylindrical elements representative of its trunks, branches and leaves. The fire front has 10 m long and a 2 m high. The study was conducted taking into account that the pine tree is located 5, 10 or 15 m from the fire front. For these three analyzed distances, the numerical results obtained regarding to the distribution of the view factors, mean radiant temperature and surface temperatures of the pine tree are presented. As main conclusion, it can be stated that the values of the view factor, MRT and surface temperatures of the pine tree decrease with increasing distance from the pine tree in front of fire.

NUMERICAL STUDY FOR THAILAND: MATHEMATICAL MODEL OF PRODUCTION AND LOGISTIC PLANNING FOR SUGARCANES USED IN BIOFUEL PRODUCTION

2013 ◽  
Author(s):  
Pancheewa Benjamasutin ◽  
◽  
Ponthong Rijana ◽  
Phongchayont Srisuwan ◽  
Aussadavut Dumrongsiri
Keyword(s):  
Mathematical Model ◽  
Numerical Study ◽  
Biofuel Production ◽  
Logistic Planning
Sign in / Sign up

Export Citation Format

Share Document