Modification of the mean near-wall velocity profile of a high-Reynolds number turbulent boundary layer with the injection of drag-reducing polymer solutions

2013 ◽  
Vol 25 (8) ◽  
pp. 085103 ◽  
Author(s):  
Brian R. Elbing ◽  
Marc Perlin ◽  
David R. Dowling ◽  
Steven L. Ceccio
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
High Reynolds Number ◽  
Polymer Solutions ◽  
Wall Velocity ◽  
The Mean ◽  
High Reynolds ◽  
Drag Reducing Polymer

Well Resolved Wall Pressure Measurements in a High Reynolds Number Turbulent Boundary Layer

2004 ◽  
Author(s):  
Brendan F. Perkins
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Surface Pressure ◽  
High Reynolds Number ◽  
Wall Pressure ◽  
Pressure Measurements ◽  
Boundary Layer Turbulence ◽  
High Reynolds ◽  
Salt Playa

In order to better understand boundary layer turbulence at high Reynolds number, the fluctuating wall pressure was measured within the turbulent boundary layer that forms over the salt playa of Utah’s west desert. Pressure measurements simultaneously acquired from an array of nine microphones were analyzed and interpreted. The wall pressure intensity was computed and compared with low Reynolds number data. This analysis indicated that the variance in wall pressure increases logarithmically with Reynolds number. Computed autocorrelations provide evidence for a hierarchy of surface pressure producing scales. Space-time correlations are used to compute broadband convection velocities. The convection velocity data indicate an increasing value for larger sensor separations. To the author’s knowledge, the pressure measurements are the highest Reynolds number, well resolved measurements of fluctuating surface pressure to date.

Unsteady effects of strong shock-wave/boundary-layer interaction at high Reynolds number

2017 ◽  
Vol 823 ◽  
pp. 617-657 ◽  
Author(s):  
Vito Pasquariello ◽  
Stefan Hickel ◽  
Nikolaus A. Adams
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
High Reynolds Number ◽  
Separation Bubble ◽  
Low Frequency ◽  
Boundary Layer Interaction ◽  
High Reynolds ◽  
Unsteady Effects

We analyse the low-frequency dynamics of a high Reynolds number impinging shock-wave/turbulent boundary-layer interaction (SWBLI) with strong mean-flow separation. The flow configuration for our grid-converged large-eddy simulations (LES) reproduces recent experiments for the interaction of a Mach 3 turbulent boundary layer with an impinging shock that nominally deflects the incoming flow by $19.6^{\circ }$. The Reynolds number based on the incoming boundary-layer thickness of $Re_{\unicode[STIX]{x1D6FF}_{0}}\approx 203\times 10^{3}$ is considerably higher than in previous LES studies. The very long integration time of $3805\unicode[STIX]{x1D6FF}_{0}/U_{0}$ allows for an accurate analysis of low-frequency unsteady effects. Experimental wall-pressure measurements are in good agreement with the LES data. Both datasets exhibit the distinct plateau within the separated-flow region of a strong SWBLI. The filtered three-dimensional flow field shows clear evidence of counter-rotating streamwise vortices originating in the proximity of the bubble apex. Contrary to previous numerical results on compression ramp configurations, these Görtler-like vortices are not fixed at a specific spanwise position, but rather undergo a slow motion coupled to the separation-bubble dynamics. Consistent with experimental data, power spectral densities (PSD) of wall-pressure probes exhibit a broadband and very energetic low-frequency component associated with the separation-shock unsteadiness. Sparsity-promoting dynamic mode decompositions (SPDMD) for both spanwise-averaged data and wall-plane snapshots yield a classical and well-known low-frequency breathing mode of the separation bubble, as well as a medium-frequency shedding mode responsible for reflected and reattachment shock corrugation. SPDMD of the two-dimensional skin-friction coefficient further identifies streamwise streaks at low frequencies that cause large-scale flapping of the reattachment line. The PSD and SPDMD results of our impinging SWBLI support the theory that an intrinsic mechanism of the interaction zone is responsible for the low-frequency unsteadiness, in which Görtler-like vortices might be seen as a continuous (coherent) forcing for strong SWBLI.

Pressure fluctuation in high-Reynolds-number turbulent boundary layer: results from experiments and DNS

2012 ◽  
Vol 13 ◽  
pp. N50 ◽  
Author(s):  
Yoshiyuki Tsuji ◽  
Shintaro Imayama ◽  
Philipp Schlatter ◽  
P. Henrik Alfredsson ◽  
Arne V. Johansson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Pressure Fluctuation ◽  
High Reynolds Number ◽  
High Reynolds

Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer

2006 ◽  
Vol 552 (-1) ◽  
pp. 353 ◽  
Author(s):  
WENDY C. SANDERS ◽  
ERIC S. WINKEL ◽  
DAVID R. DOWLING ◽  
MARC PERLIN ◽  
STEVEN L. CECCIO
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Drag Reduction ◽  
Flat Plate ◽  
High Reynolds Number ◽  
Friction Drag ◽  
High Reynolds ◽  
Friction Drag Reduction
Sign in / Sign up

Export Citation Format

Share Document