Numerical simulation on multi-gripper stretch forming process for sheet metal

2013 ◽  
Author(s):  
Y. Wang ◽  
M. Z. Li ◽  
H. L. Peng ◽  
S. H. Gu
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Stretch Forming ◽  
Forming Process

scholarly journals The Effect of Swinging Ball Heads with Different Arrangements in Multi-Point Stretch-Forming Process

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 337 ◽  
Author(s):  
Jian Xing ◽  
Yan-yan Cheng ◽  
Zhuo Yi
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Sheet Metal ◽  
Strain Distribution ◽  
Finite Element Models ◽  
Stretch Forming ◽  
Forming Process ◽  
Forming Quality ◽  
Staggered Arrangement ◽  
Simulation Results

To improve the effect of multi-point stretch forming of sheet metal, it is proposed in this paper to replace a fixed ball head with a swinging ball head. According to the multi-point dies with different arrangements, this research establishes finite element models of the following stretch forming, i.e., fixed ball heads with conventional arrangement, swinging ball heads with conventional arrangement, swinging ball heads with declining staggered arrangement, and swinging ball heads with parallel staggered arrangement, and then numerical simulation is performed. The simulation results show that by replacing a fixed ball head with a swinging ball head, the surface indentation of the part formed was effectively suppressed, the stress and tension strain distribution of the part formed was improved, and the forming quality was improved; the thickness of the elastic pad was reduced, the springback was reduced and the forming accuracy was improved; and when the ball head was applied to a multi-point die with staggered arrangement, a better forming result was achieved, where the best forming result was achieved in combining the swinging ball heads with the multi-point die with a parallel staggered arrangement. Forming experiments were carried out, and the experimental results were consistent with the trend of numerical simulation results, which verified the correctness of the numerical simulation.

Numerical simulation for the multi-point stretch forming process of sheet metal

2009 ◽  
Vol 209 (1) ◽  
pp. 396-407 ◽  
Author(s):  
Zhong-Yi Cai ◽  
Shao-Hui Wang ◽  
Xu-Dong Xu ◽  
Ming-Zhe Li
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Stretch Forming ◽  
Forming Process

A New Stretch-Forming Process Based on Loading at Discrete Points and its Numerical Investigation

2013 ◽  
Vol 423-426 ◽  
pp. 737-740
Author(s):  
Zhong Yi Cai ◽  
Mi Wang ◽  
Chao Jie Che
Keyword(s):  
Sheet Metal ◽  
Three Dimensional ◽  
Discrete Point ◽  
Stretch Forming ◽  
Sheet Metal Part ◽  
Metal Part ◽  
Forming Process ◽  
Loading Trajectory ◽  
New Process ◽  
Forming Defects

A new stretch-forming process based on discretely loading for three-dimensional sheet metal part is proposed and numerically investigated. The gripping jaw in traditional stretch-forming process is replaced by the discrete array of loading units, and the stretching load is applied at discrete points on the two ends of sheet metal. By controlling the loading trajectory at the each discrete point, an optimal stretch-forming process can be realized. The numerical results on the new stretch-forming process of a saddle-shaped sheet metal part show that the distribution of the deformation on the formed surface of new process is more uniform than that of traditional stretch-forming, and the forming defects can be avoided and better forming quality will be obtained.

Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results

2013 ◽  
Vol 554-557 ◽  
pp. 1375-1381 ◽  
Author(s):  
Laurence Giraud-Moreau ◽  
Abel Cherouat ◽  
Jie Zhang ◽  
Houman Borouchaki
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Sheet Metal ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Computation Time ◽  
Experimental Results ◽  
Forming Process ◽  
Adaptive Remeshing

Recently, new sheet metal forming technique, incremental forming has been introduced. It is based on using a single spherical tool, which is moved along CNC controlled tool path. During the incremental forming process, the sheet blank is fixed in sheet holder. The tool follows a certain tool path and progressively deforms the sheet. Nowadays, numerical simulations of metal forming are widely used by industry to predict the geometry of the part, stresses and strain during the forming process. Because incremental forming is a dieless process, it is perfectly suited for prototyping and small volume production [1, 2]. On the other hand, this process is very slow and therefore it can only be used when a slow series production is required. As the sheet incremental forming process is an emerging process which has a high industrial interest, scientific efforts are required in order to optimize the process and to increase the knowledge of this process through experimental studies and the development of accurate simulation models. In this paper, a comparison between numerical simulation and experimental results is realized in order to assess the suitability of the numerical model. The experimental investigation is realized using a three-axis CNC milling machine. The forming tool consists in a cylindrical rotating punch with a hemispherical head. A subroutine has been developed to describe the tool path from CAM procedure. A numerical model has been developed to simulate the sheet incremental forming process. The finite element code Abaqus explicit has been used. The simulation of the incremental forming process stays a complex task and the computation time is often prohibitive for many reasons. During this simulation, the blank is deformed by a sequence of small increments that requires many numerical increments to be performed. Moreover, the size of the tool diameter is generally very small compared to the size of the metal sheet and thus the contact zone between the tool and the sheet is limited. As the tool deforms almost every part of the sheet, small elements are required everywhere in the sheet resulting in a very high computation time. In this paper, an adaptive remeshing method has been used to simulate the incremental forming process. This strategy, based on adaptive refinement and coarsening procedures avoids having an initially fine mesh, resulting in an enormous computing time. Experiments have been carried out using aluminum alloy sheets. The final geometrical shape and the thickness profile have been measured and compared with the numerical results. These measurements have allowed validating the proposed numerical model. References [1] M. Yamashita, M. Grotoh, S.-Y. Atsumi, Numerical simulation of incremental forming of sheet metal, J. Processing Technology, No. 199 (2008), p. 163 172. [2] C. Henrard, A.M. Hbraken, A. Szekeres, J.R. Duflou, S. He, P. Van Houtte, Comparison of FEM Simulations for the Incremental Forming Process, Advanced Materials Research, 6-8 (2005), p. 533-542.

Flexible Stretch Forming Technology for Sheet Metal Based on Discrete-Gripper and Multi-Point Die

2014 ◽  
Vol 556-562 ◽  
pp. 460-463 ◽  
Author(s):  
Xue Chen ◽  
Ming Zhe Li ◽  
Wen Hua Liu ◽  
Zhi Qiang Hou
Keyword(s):  
Sheet Metal ◽  
Experimental Results ◽  
Shape Error ◽  
Stretch Forming ◽  
Forming Process ◽  
Structural Composition ◽  
Forming Technology ◽  
Working Principle ◽  
Material Utilization

To solve the problem of low material utilization in traditional stretch forming process, a flexible stretch forming method was proposed, which can be realized by interaction of the multi-point stretch forming die with discrete-gripper stretch forming machine. The principle and characteristics of sheet metal flexible stretch forming technology was introduced, structural composition and working principle of the multi-point stretch forming die and discrete-gripper stretch forming machine were expounded, and the technology experiments was carried out with a self-designed flexible stretch forming technology equipment for sheet metal. The experimental results indicate that structure of multi-point stretch forming die and discrete-gripper stretch forming machine are reasonable, and flexible stretch forming technology can be realized by above-mentioned die and machine, stretch forming parts has a good quality and its shape error can satisfy requirements of production.

scholarly journals Modelling and Simulation of Sheet Metal Forming Processes

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1356 ◽  
Author(s):  
Marta C. Oliveira ◽  
José V. Fernandes
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Modelling And Simulation ◽  
Forming Process ◽  
Household Appliances ◽  
Indispensable Tool

Numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming process, in industries ranging from the automotive, to the aeronautics, packing and household appliances [...]

Numerical Simulation of Forming Process for Cover with Stiffening Components Made of Grade 2 Titanium Sheet Metal

2016 ◽  
Vol 687 ◽  
pp. 206-211
Author(s):  
Wojciech Więckowski
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Empirical Studies ◽  
Strength Properties ◽  
Forming Process ◽  
Titanium Sheet ◽  
Plastic Properties ◽  
Fem Method

This study presents the findings of numerical simulations of forming process for an inspection hole cover with stiffening ribs made of thin grade 2 titanium sheet metal. The numerical simulation was carried out using the FEM method with PAMStamp 2G software. Numerical calculations were performed with consideration for the phenomenon of material strain hardening and anisotropy of plastic properties of the sheet metal formed. Properties of the grade 2 titanium alloy analysed in the simulations were adopted based on the results of the empirical studies. Adequate parameters of the forming process were selected in order to eliminate unfavourable phenomena of losing of material coherence and sheet metal wrinkling. The effect of conditions of friction between the sheet metal and tool and pressure force of the blank holder on the forming process was investigated. The analysis of the distribution of plastic strain and reduction in wall thickness of the drawn parts can be used for determination of the effect of changes in selected parameters and orientation of the specimen on the process of drawn part forming. The quality of drawn parts was assessed based on the shape inaccuracy determined during simulation of forming. The inaccuracy depended on the conditions of the process and strength properties of the titanium sheet metal.

Numerical Simulation of the Effect of Punch Paths on the Quality of Sheet Metal Stretch Forming

2012 ◽  
Vol 217-219 ◽  
pp. 2002-2005
Author(s):  
Chang Jiang Wang ◽  
Diane J Mynors ◽  
Tarsem Sihra
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Finite Element Modelling ◽  
Metal Strip ◽  
Stretch Forming ◽  
Forming Quality ◽  
Element Modelling

Presented here is the simulation of uniaxial stretch forming using two punches in a sheet metal forming operation. In the finite element modelling, the sheet metal strip was held by two bank holders and two punches are able to move in two directions to stretch the sheet metal. Due to the friction between the punch and sheet metal, it was found that friction affects the sheet metal forming quality, however by adopting an optimal punch path the effect of friction in sheet metal forming can be reduced. The effect of punch paths on the quality of the sheet metal are also reported in this paper.

Forming Stability Analysis of Surface Flexible Rolling

2013 ◽  
Vol 798-799 ◽  
pp. 267-271
Author(s):  
Ren Jun Li ◽  
Ming Zhe Li ◽  
Zhong Yi Cai
Keyword(s):  
Numerical Simulation ◽  
Stability Analysis ◽  
Sheet Metal ◽  
Three Dimensional ◽  
Continuous Manufacturing ◽  
Forming Process ◽  
Metal Parts ◽  
Sheet Metal Parts ◽  
Flexible Rolling ◽  
Simulation Results

Surface flexible rolling method, using two integral working rolls as the forming tool, can achieve fast, flexible and continuous manufacturing of three-dimensional sheet metal parts. This paper introduces the basic principle of surface flexible rolling and discusses the numerical simulation results when the working rolls are bended as circular arcs. The stability indicates the forming effect to some extent and the flow type of the metal can be deduced from stability analysis. To integrate and analyze the simulation results by means of reverse engineering. The analysis results show that the forming process is stable and the effect of surface flexible rolling is fine. It also indicates that inhomogeneous deformation and accumulation occurs during the process. The numerical simulation and experimental results demonstrate that the surface flexible rolling is a feasible and effective way to form three-dimensional sheet metal parts.

Sign in / Sign up

Export Citation Format

Share Document