Charge recombination in the muon collider cooling channel

2013 ◽  
Author(s):  
R. C. Fernow ◽  
R. B. Palmer
Keyword(s):  
Charge Recombination ◽  
Cooling Channel ◽  
Muon Collider

Enhanced efficacy of defect passivation and charge extraction for efficient perovskite photovoltaics with a small open circuit voltage loss

2019 ◽  
Vol 7 (15) ◽  
pp. 9025-9033 ◽  
Author(s):  
Jin-Feng Liao ◽  
Wu-Qiang Wu ◽  
Jun-Xing Zhong ◽  
Yong Jiang ◽  
Lianzhou Wang ◽  
...  
Keyword(s):  
Grain Boundary ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Open Circuit Voltage ◽  
Power Conversion ◽  
Charge Recombination ◽  
Open Circuit ◽  
Polymeric Semiconductor ◽  
Voltage Loss ◽  
Defect Passivation

A multifunctional 2D polymeric semiconductor was incorporated to provide surprisingly robust efficacy in grain boundary functionalization and defect passivation of perovskite, which suppresses charge recombination and thus affording an illustrious photovoltage of 1.16 V and power conversion efficiency of 21.1%.

scholarly journals Improving Cooling Performance of Injection Molding Tool with Conformal Cooling Channel by Adding Hybrid Fillers

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1224
Author(s):  
Chil-Chyuan Kuo ◽  
Wei-Hua Chen
Keyword(s):  
Thermal Conductivity ◽  
Injection Molding ◽  
Cooling Time ◽  
Performance Ratio ◽  
Cooling Efficiency ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Conformal Cooling ◽  
Fused Deposition ◽  
Silicone Rubber Mold

Silicone rubber mold (SRM) is capable of reducing the cost and time in a new product development phase and has many applications for the pilot runs. Unfortunately, the SRM after injection molding has a poor cooling efficiency due to its low thermal conductivity. To improve the cooling efficiency, the thermal conductivity of the SRM was improved by adding fillers into the SRM. An optimal recipe for fabricating a high cooling efficiency low-pressure injection mold with conformal cooling channel fabricated by fused deposition modeling technology was proposed and implemented. This study proposes a recipe combining 52.6 wt.% aluminum powder, 5.3 wt.% graphite powder, and 42.1 wt.% liquid silicon rubber can be used to make SRM with excellent cooling efficiency. The price–performance ratio of this SRM made by the proposed recipe is around 55. The thermal conductivity of the SRM made by the proposed recipe can be increased by up to 77.6% compared with convention SRM. In addition, the actual cooling time of the injection molded product can be shortened up to 69.1% compared with the conventional SRM. The actual cooling time obtained by the experiment is in good agreement with the simulation results with the relative error rate about 20%.

Sign in / Sign up

Export Citation Format

Share Document