The fast cooling/heating rate effects in devitrification of glasses. II. Crystallization kinetics

1998 ◽  
Vol 109 (1) ◽  
pp. 186-195 ◽  
Author(s):  
V. A. Shneidman ◽  
D. R. Uhlmann
Keyword(s):  
Heating Rate ◽  
Crystallization Kinetics ◽  
Rate Effects ◽  
Fast Cooling

Heating rate effects on the thermal and mechanical properties of ZrB 2

2021 ◽  
Author(s):  
Eric W. Neuman ◽  
Matthew J. Thompson ◽  
William G. Fahrenholtz ◽  
Gregory E. Hilmas
Keyword(s):  
Mechanical Properties ◽  
Heating Rate ◽  
Thermal And Mechanical Properties ◽  
Rate Effects

scholarly journals Heating rate effects on the crystallization behavior of isotactic polypropylene from mesophase – A de-polarized light transmission study

Polymer ◽  
2012 ◽  
Vol 53 (13) ◽  
pp. 2777-2782 ◽  
Author(s):  
Harutoshi Asakawa ◽  
Koji Nishida ◽  
Junpei Yamamoto ◽  
Rintaro Inoue ◽  
Toshiji Kanaya
Keyword(s):  
Heating Rate ◽  
Isotactic Polypropylene ◽  
Crystallization Behavior ◽  
Light Transmission ◽  
Polarized Light ◽  
Rate Effects ◽  
Transmission Study

scholarly journals Coupled Thermal-Mechanical Progressive Damage Model with Strain and Heating Rate Effects for Lightning Strike Damage Assessment

2019 ◽  
Vol 26 (5-6) ◽  
pp. 1437-1459 ◽  
Author(s):  
S. L. J. Millen ◽  
A. Murphy ◽  
G. Catalanotti ◽  
G. Abdelal
Keyword(s):  
Heating Rate ◽  
Thermal Loading ◽  
Damage Model ◽  
Applied Pressure ◽  
Mechanical Damage ◽  
Failure Criteria ◽  
Lightning Strike ◽  
Progressive Damage ◽  
Rate Effects ◽  
Progressive Damage Model

AbstractThis paper proposes a progressive damage model incorporating strain and heating rate effects for the prediction of composite specimen damage resulting from simulated lightning strike test conditions. A mature and robust customised failure model has been developed. The method used a scaling factor approach and non-linear degradation models from published works to modify the material moduli, strength and stiffness properties to reflect the effects of combined strain and thermal loading. Hashin/Puck failure criteria was used prior to progressive damage modelling of the material. Each component of the method was benchmarked against appropriate literature. A three stage modelling framework was demonstrated where an initial plasma model predicts specimen surface loads (electrical, thermal, pressure); a coupled thermal-electric model predicts specimen temperature resulting from the electrical load; and a third, dynamic, coupled temperature-displacement, explicit model predicts the material state due to the thermal load, the resulting thermal-expansion and the lightning plasma applied pressure loading. Unprotected specimen damage results were presented for two SAE lightning test Waveforms (B & A); with the results illustrating how thermal and mechanical damage behaviour varied with waveform duration and peak current.

Moisture and Heating Rate Effects on Volatile Matter Yields for Coals

2018 ◽  
Vol 47 (1) ◽  
pp. 20170407
Author(s):  
Mason Marsh ◽  
John T. Riley
Keyword(s):  
Heating Rate ◽  
Volatile Matter ◽  
Rate Effects

scholarly journals Heating rate effects on thermal analysis measurement ofTgin composite materials

2017 ◽  
Vol 3 (2) ◽  
pp. 43-51 ◽  
Author(s):  
Ana X. H. Yong ◽  
Graham D. Sims ◽  
Samuel J. P. Gnaniah ◽  
Stephen L. Ogin ◽  
Paul A. Smith
Keyword(s):  
Thermal Analysis ◽  
Composite Materials ◽  
Heating Rate ◽  
Analysis Measurement ◽  
Rate Effects

The effect of heating rate on the phase transition and crystallization kinetics of Ag2Se0.2Te0.8 alloy

2014 ◽  
Vol 119 (1) ◽  
pp. 91-97 ◽  
Author(s):  
C. Vijayan ◽  
N. Soundararajan ◽  
R. Chandramohan ◽  
S. Ramaswamy ◽  
P. Gnanadurai
Keyword(s):  
Phase Transition ◽  
Heating Rate ◽  
Crystallization Kinetics ◽  
Kinetics Of

Thermal wrinkling behavior of formable decorative film laminates

2016 ◽  
Vol 33 (3) ◽  
pp. 290-308 ◽  
Author(s):  
G Prasath Balamurugan ◽  
Rohan N Pukadyil ◽  
Mahdy M Malayery ◽  
Michael R Thompson ◽  
John Vlachopoulos ◽  
...  
Keyword(s):  
Heating Rate ◽  
Thermal Stresses ◽  
Metal Substrate ◽  
Rate Effect ◽  
Time Dependent ◽  
Threshold Temperature ◽  
Viscoelastic Response ◽  
Final Temperature ◽  
Rate Effects ◽  
Compliant Layer

This paper focuses on wrinkle development in decorative film laminates during heating operations with the goal to understand their driving factors and develop strategies to overcome such defects. The study looked at temperature and heating rate effects on the wrinkling behavior of a commercial black-out film laminated onto a metal substrate. The 135℃ threshold temperature identified for our film under which no wrinkles formed, related to the stiffness of its different construction layers. Heating rate was also noted by this study to be an important parameter in wrinkling; values between 1℃ and 350℃/min were tested. It was possible to exceed the threshold temperature stated above without wrinkling when the heating rate was sufficiently low (closer to 1℃/min, though less than 50℃/min was often sufficient depending on the final temperature). The heating rate effect is believed to be related to the time-dependent viscoelastic response of the compliant layer in relation to building thermal stresses.

Sign in / Sign up

Export Citation Format

Share Document