scholarly journals Aluminium doped Zn1−xMgxO—A transparent conducting oxide with tunable optical and electrical properties

2012 ◽  
Vol 101 (12) ◽  
pp. 121918 ◽  
Author(s):  
K. Fleischer ◽  
E. Arca ◽  
C. Smith ◽  
I. V. Shvets
2019 ◽  

Transparent conducting oxide (TCO) thin films are materials of significance for their applications in optoelectronics and sun powered cells. Fluorine-doped tin oxide (FTO) is an elective material in the advancement of TCO films. This paper reports the impact of fluorine doping on structural, optical and electrical properties of tin oxide thin films for solar cells application. The sol-gel was prepared from anhydrous stannous chloride, SnCl2 as an originator, 2-methoxyethanol as a solvent, di-ethanolamine as a preservative and ammonium fluoride as the dopant source. FTO precursor solution was formulated to obtain 0, 5, 10, 15 and 20 % doping concentration and deposited on glass substrates by means of spin coater at the rate of 2000 rpm for 40 seconds. After pre-heated at 200 oC, the samples were annealed at 600 oC for 2 h. The structural, optical and electrical characteristics of prepared films were characterized using X-ray diffraction (XRD) analysis, UV-visible spectroscopy and electrical measurement. X-ray diffraction (XRD) investigation of the films demonstrated that the films were polycrystalline in nature with tetragonal-cassiterite structure with most extraordinary pinnacle having a grain size of 17.01 nm. Doping with fluorine decreases the crystallite size. There was increment in the absorbance of the film with increasing wavelength and the transmittance was basically reduced with increasing fluorine doping in the visible region. The energy band gaps were in the range of 4.106-4.121 eV. The sheet resistance were observed to decrease as the doping percentage of fluorine increased with exception at higher doping of 15 and 20 %. In view of these outcomes, FTO thin films prepared could have useful application in transparent conducting oxide electrode in solar cell.


2011 ◽  
Vol 04 (04) ◽  
pp. 401-405 ◽  
Author(s):  
W. CHER ◽  
S. YICK ◽  
S. XU ◽  
Z. J. HAN ◽  
K. OSTRIKOV

Al -doped zinc oxide (AZO) thin films are deposited onto glass substrates using radio-frequency reactive magnetron sputtering and the improvements in their physical properties by post-synthesis thermal treatment are reported. X-ray diffraction spectra show that the structure of films can be controlled by adjusting the annealing temperatures, with the best crystallinity obtained at 400°C under a nitrogen atmosphere. These films exhibit improved quality and better optical transmittance as indicated by the UV-Vis spectra. Furthermore, the sheet resistivity is found to decrease from 1.87 × 10-3 to 5.63 × 10-4Ω⋅cm and the carrier mobility increases from 6.47 to 13.43 cm2 ⋅ V-1 ⋅ s-1 at the optimal annealing temperature. Our results demonstrate a simple yet effective way in controlling the structural, optical and electrical properties of AZO thin films, which is important for solar cell applications.


2011 ◽  
Vol 32 (4) ◽  
pp. 307-312
Author(s):  
吕有明 LV You-ming ◽  
曹培江 CAO Pei-jiang ◽  
贾芳 JIA Fang ◽  
柳文军 LIU Wen-jun ◽  
朱德亮 ZHU De-liang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document