In situ stress has an important influence on coal reservoir permeability, fracturing, and production capacity. In this paper, fracturing testing, imaging logging, and 3D finite-element simulation were used to study the current in situ stress field of a coal reservoir with a high coal rank. The results indicated that the horizontal stress field within the coal reservoir is controlled by the burial depth, folding, and faulting. The [Formula: see text] and [Formula: see text] values within the coal reservoir are 1–2.5 MPa higher than those within the clastic rocks of the roof and floor. The [Formula: see text]–[Formula: see text] values of the coal reservoir are generally between 2 and 6 MPa and increase with burial depth. When the [Formula: see text]–[Formula: see text] value is less than 5 MPa, production from a single well is high, but when the [Formula: see text]–[Formula: see text] value is greater than 5 MPa, production from a single well is low. In addition, the accumulated water production is high when the [Formula: see text]–[Formula: see text] value is greater than 5 MPa, demonstrating that a higher [Formula: see text]–[Formula: see text] value allows the hydraulic fractures to more easily penetrate the roof and floor of the coal seam. In coal-bed methane development regions with high [Formula: see text]–[Formula: see text] values, repeated fracturing using the small-scale plug removal method — which is a fracturing method that uses a small volume of liquid, small displacement, and low sand concentration — is suggested.
Experimental investigation of mobile small-scale liquefier for 10000 NM3/D of coal bed methane gas