Scanning photoelectron microscopy study of the laser-induced transformations of polycrystalline CdTe films

2000 ◽  
Vol 87 (7) ◽  
pp. 3520-3525 ◽  
Author(s):  
Art J. Nelson ◽  
M. Danailov ◽  
L. Gregoratti ◽  
M. Marsi ◽  
M. Kiskinova
Keyword(s):  
Microscopy Study ◽  
Cdte Films ◽  
Scanning Photoelectron Microscopy

Scanning photoelectron microscopy study of Ge1−xTx (T=Cr, Fe) diluted ferromagnetic semiconductor single crystals

2005 ◽  
Vol 97 (10) ◽  
pp. 10A307 ◽  
Author(s):  
G. Kim ◽  
S. C. Wi ◽  
S. S. Lee ◽  
J.-S. Kang ◽  
S. Y. Choi ◽  
...  
Keyword(s):  
Single Crystals ◽  
Microscopy Study ◽  
Ferromagnetic Semiconductor ◽  
Scanning Photoelectron Microscopy

Scanning Photoelectron Microscopy Study of the Pt/Phosphoric-Acid-Imbibed Membrane Interface under Polarization

2013 ◽  
Vol 1 (1) ◽  
pp. 180-186 ◽  
Author(s):  
Won H. Doh ◽  
Luca Gregoratti ◽  
Matteo Amati ◽  
Spyridon Zafeiratos ◽  
Yeuk T. Law ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Microscopy Study ◽  
Membrane Interface ◽  
Scanning Photoelectron Microscopy

A scanning photoelectron microscopy study of AlN/SixNy insulating stripes

2005 ◽  
Vol 599 (1-3) ◽  
pp. 107-112 ◽  
Author(s):  
Chien-Hsun Chen ◽  
Shih-Chieh Wang ◽  
Chung-Ming Yeh ◽  
Jennchang Hwang ◽  
Ruth Klauser
Keyword(s):  
Microscopy Study ◽  
Scanning Photoelectron Microscopy

Scanning photoelectron microscopy study of laser-induced surface reactions in Pt/Si(001)

2002 ◽  
Vol 81 (21) ◽  
pp. 3981-3983 ◽  
Author(s):  
A. J. Nelson ◽  
M. Danailov ◽  
A. Barinov ◽  
B. Kaulich ◽  
L. Gregoratti ◽  
...  
Keyword(s):  
Surface Reactions ◽  
Microscopy Study ◽  
Scanning Photoelectron Microscopy

In-situ scanning photoelectron microscopy study of operating (La,Sr)FeO3-based NOx-sensing surfaces

2012 ◽  
Vol 225 ◽  
pp. 716-726 ◽  
Author(s):  
M. Backhaus-Ricoult ◽  
K. Adib ◽  
K. Work ◽  
M. Badding ◽  
T. Ketcham ◽  
...  
Keyword(s):  
Microscopy Study ◽  
Scanning Photoelectron Microscopy

A High Voltage Electron Microscopy Study of Sub-Oxide Formation in Vanadium

1971 ◽  
Vol 29 ◽  
pp. 212-213
Author(s):  
R. H. Geiss ◽  
R. L. Ladd ◽  
K. R. Lawless
Keyword(s):  
High Vacuum ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Ultra High Vacuum ◽  
Pure Oxygen ◽  
Pressure Oxidation ◽  
High Voltage Electron Microscopy ◽  
Oxidation Study ◽  
Voltage Electron ◽  
Good Agreement

Detailed electron microscope and diffraction studies of the sub-oxides of vanadium have been reported by Cambini and co-workers, and an oxidation study, possibly complicated by carbon and/or nitrogen, has been published by Edington and Smallman. The results reported by these different authors are not in good agreement. For this study, high purity polycrystalline vanadium samples were electrochemically thinned in a dual jet polisher using a solution of 20% H2SO4, 80% CH3OH, and then oxidized in an ion-pumped ultra-high vacuum reactor system using spectroscopically pure oxygen. Samples were oxidized at 350°C and 100μ oxygen pressure for periods of 30,60,90 and 160 minutes. Since our primary interest is in the mechanism of the low pressure oxidation process, the oxidized samples were cooled rapidly and not homogenized. The specimens were then examined in the HVEM at voltages up to 500 kV, the higher voltages being necessary to examine thick sections for which the oxidation behavior was more characteristic of the bulk.

Extended Preservation of Iron for Transmission

1967 ◽  
Vol 25 ◽  
pp. 354-355
Author(s):  
E. P. Abrahamson II ◽  
M. W. Dumais
Keyword(s):  
Acid Solution ◽  
Perchloric Acid ◽  
Microscopy Study ◽  
Perchloric Acid Solution ◽  
Transmission Microscopy ◽  
Iron Base ◽  
Cold Stage

In a transmission microscopy study of iron and dilute iron base alloys, it was determined that it is possible to preserve specimens for extended periods of time. Our specimens were prepunched from 5 to 8 mil sheet to microscope size and annealed for several hours at 700°C. They were then thinned in a glacial acetic-12 percent perchloric acid solution using 10 volts and 20 milliamperes, at a temperature of 8 to 14°C.It was noted that by the use of a cold stage, the same specimen can be observed for periods up to one week without excess contamination. When removal of the specimen from the column becomes necessary, it was observed that a specimen may be kept for later observation in 1,2 dichloroethene or methanol for periods in excess of two weeks.

Lorentz microscopy study of magnetic domain walls in Fe-Cr-Co alloys

1978 ◽  
Vol 36 (1) ◽  
pp. 462-463
Author(s):  
Yalcin Belli
Keyword(s):  
Domain Walls ◽  
Magnetic Domain ◽  
Microscopy Study ◽  
Ferromagnetic Phase ◽  
Stable Phase ◽  
Magnetic Domains ◽  
Lorentz Microscopy ◽  
Magnetic Hardening ◽  
Electron Microscopes ◽  
Co Alloys

Fe-Cr-Co alloys have great technological potential to replace Alnico alloys as hard magnets. The relationship between the microstructures and the magnetic properties has been recently established for some of these alloys. The magnetic hardening has been attributed to the decomposition of the high temperature stable phase (α) into an elongated Fe-rich ferromagnetic phase (α1) and a weakly magnetic or non-magnetic Cr-rich phase (α2). The relationships between magnetic domains and domain walls and these different phases are yet to be understood. The TEM has been used to ascertain the mechanism of magnetic hardening for the first time in these alloys. The present paper describes the magnetic domain structure and the magnetization reversal processes in some of these multiphase materials. Microstructures to change properties resulting from, (i) isothermal aging, (ii) thermomagnetic treatment (TMT) and (iii) TMT + stepaging have been chosen for this investigation. The Jem-7A and Philips EM-301 transmission electron microscopes operating at 100 kV have been used for the Lorentz microscopy study of the magnetic domains and their interactions with the finely dispersed precipitate phases.

Sign in / Sign up

Export Citation Format

Share Document