Chemical composition and thermal stability of GaAs oxides grown by AFM anodic oxidation for site-controlled growth of InAs quantum dots

2011 ◽  
Author(s):  
K. M. Cha ◽  
K. Shibata ◽  
I. Horiuchi ◽  
M. Kamiko ◽  
R. Yamamoto ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Quantum Dots ◽  
Chemical Composition ◽  
Anodic Oxidation ◽  
Controlled Growth ◽  
Inas Quantum Dots ◽  
Thermal Stability Of

Site-controlled growth and luminescence of InAs quantum dots using in situ Ga-assisted deoxidation of patterned substrates

2008 ◽  
Vol 93 (10) ◽  
pp. 101908 ◽  
Author(s):  
P. Atkinson ◽  
S. Kiravittaya ◽  
M. Benyoucef ◽  
A. Rastelli ◽  
O. G. Schmidt
Keyword(s):  
Quantum Dots ◽  
Controlled Growth ◽  
Patterned Substrates ◽  
Inas Quantum Dots

Improved Luminescence Properties and Thermal Stability of ZnS Quantum Dots by Organic and Inorganic Passivation

2002 ◽  
Vol 19 (7) ◽  
pp. 967-969 ◽  
Author(s):  
El-Khair Hatim Mohamed ◽  
Xu Ling ◽  
Chen Kun-Ji ◽  
Ma Yi ◽  
Zhang Yu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Quantum Dots ◽  
Luminescence Properties ◽  
Thermal Stability Of

scholarly journals Heterogeneity of the chemical composition and thermal stability of particulate organic matter in French forest soils

Geoderma ◽  
2019 ◽  
Vol 342 ◽  
pp. 65-74 ◽  
Author(s):  
Laure Soucémarianadin ◽  
Lauric Cécillon ◽  
Claire Chenu ◽  
François Baudin ◽  
Manuel Nicolas ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Organic Matter ◽  
Chemical Composition ◽  
Particulate Organic Matter ◽  
Forest Soils ◽  
Thermal Stability Of

scholarly journals Influences of Bath Chemistry and Plating Variables on Characteristics of Electroless Ni–P Films on Si Wafers from Alkaline Citrate Solutions

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Naiming Miao ◽  
Jinjin Jiang ◽  
Wangping Wu
Keyword(s):  
Thermal Stability ◽  
Chemical Composition ◽  
Deposition Rate ◽  
Electroless Nickel ◽  
Monocrystalline Silicon ◽  
P Content ◽  
Almost All ◽  
P Type ◽  
Electroless Ni ◽  
Thermal Stability Of

Electroless nickel–phosphorus (Ni–P) films were produced on the surface of p-type monocrystalline silicon in the alkaline citrate solutions. The influences of bath chemistry and plating variables on the chemical composition, deposition rate, morphology, and thermal stability of electroless Ni–P films on silicon wafers were studied. The as-deposited Ni–P films were almost all medium- and high-P deposits. The concentrations of Ni2+ and citric ions influenced the deposition rate of the films but did not affect P content in the deposits. With increasing H2PO2− content, the P content and deposition rate were steadily increased. The pH and plating temperature had a significant effect on the chemical composition and the deposition rate of the films. The thermal stability of the medium-P film was better than that of the high-P deposit. At the same time, the proposed mechanism of Ni–P films on monocrystalline silicon substrates in the alkaline bath solution was discussed and addressed.

Study of Thermal Stability of Magnesium Alloys

2013 ◽  
Vol 690-693 ◽  
pp. 74-77
Author(s):  
Zuzana Turnova ◽  
Tomas Chrebet ◽  
Ivana Turekova ◽  
Karol Balog
Keyword(s):  
Thermal Stability ◽  
Chemical Composition ◽  
Magnesium Alloys ◽  
Ignition Temperature ◽  
Structural Materials ◽  
Mg Alloys ◽  
Muffle Furnace ◽  
Dynamic Heating ◽  
Thermal Stability Of

Today, magnesium (Mg) alloys are recognized alternatives to iron and aluminum to reduce the weight of structural materials. This contribution was performed to provide information on the flammability of magnesium alloys through investigation of the ignition temperature of selected Mg alloys. The test was performed in a muffle furnace with dynamic heating program. Also were performed tests of chemical composition of studied specimens.

Thermal Stability of Mechanical Properties of Copper after Equal-Channel Angular Pressing

2008 ◽  
Vol 584-586 ◽  
pp. 960-965 ◽  
Author(s):  
Tamara Kravchenko ◽  
Alexander Korshunov ◽  
Natalia Zhdanova ◽  
Lev Polyakov ◽  
Irina Kaganova
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Chemical Composition ◽  
Yield Strength ◽  
Equal Channel Angular Pressing ◽  
Angular Pressing ◽  
Different Temperatures ◽  
Thermal Stability Of

Annealed oxygen-free and tough-pitch copper samples have been processed by equalchannel angular pressing (ECAP) by route BC. The samples included 8 x 8 mm section pieces and a 40 mm diameter bar. Thermal stability was assessed based on the changes in the standard mechanical properties (conventional yield strength, tensile strength, elongation, proportional elongation and contraction) after annealing at different temperatures for 1 hour. Thermal stability of the same grade of material has been found to be different for different batches and to depend on the structural conditions of deformed material. The zone of thermal stability for copper of the two grades of interest does not depend on the material’s chemical composition.

Improved luminescence and thermal stability of semipolar (11-22) InGaN quantum dots

2011 ◽  
Vol 98 (20) ◽  
pp. 201911 ◽  
Author(s):  
A. Das ◽  
G. P. Dimitrakopulos ◽  
Y. Kotsar ◽  
A. Lotsari ◽  
Th. Kehagias ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Quantum Dots ◽  
Thermal Stability Of

Enhanced thermal stability of InP quantum dots coated with Al-doped ZnS shell

2019 ◽  
Vol 151 (14) ◽  
pp. 144704 ◽  
Author(s):  
Sungjun Koh ◽  
Hyeonjun Lee ◽  
Taemin Lee ◽  
Kyoungwon Park ◽  
Woo-Jae Kim ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Quantum Dots ◽  
Thermal Stability Of ◽  
Inp Quantum Dots
Sign in / Sign up

Export Citation Format

Share Document