X‐ray study of the three‐dimensional orientation of mixeda/c‐oriented YBa2Cu3Oxfilms on (100)‐SrTiO3substrates by metalorganic chemical vapor deposition

1994 ◽  
Vol 76 (5) ◽  
pp. 2951-2953 ◽  
Author(s):  
F. Sandiumenge ◽  
J. Santiso ◽  
A. Figueras
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
X Ray ◽  
Metalorganic Chemical

Real-Time Composition And Thickness Control Techniques In A Metalorganic Chemical Vapor Deposition Process

1995 ◽  
Vol 406 ◽  
Author(s):  
M. S. Gaffneyt ◽  
C. M. Reavesl ◽  
A. L Holmes ◽  
R. S. Smith ◽  
S. P. DenBaars
Keyword(s):  
Chemical Vapor Deposition ◽  
Real Time ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Normal Operation ◽  
Growth Monitoring ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metalorganic Chemical

AbstractMetalorganic chemical vapor deposition (MOCVD) is a process used to manufacture electronic and optoelectronic devices that has traditionally lacked real-time growth monitoring and control. We have developed control strategies that incorporate monitors as real-time control sensors to improve MOCVD growth. An analog control system with an ultrasonic concentration monitor was used to reject bubbler concentration disturbances which exist under normal operation, during the growth of a four-period GaInAs/InP superlattice. Using X-ray diffraction, it was determined that the normally occurring concentration variations led to a wider GaInAs peak in the uncompensated growths as compared to the compensated growths, indicating that closed loop control improved GaInAs composition regulation. In further analysis of the X-ray diffraction curves, superlattice peaks were used as a measure of high crystalline quality. The compensated curve clearly displayed eight orders of satellite peaks, whereas the uncompensated curve shows little evidence of satellite peaks.

Growth of Epitaxial BaTiO3 Thin Films at 600°C by Metalorganic Chemical Vapor Deposition

1994 ◽  
Vol 361 ◽  
Author(s):  
D.L. Kaiser ◽  
M.D. Vaudin ◽  
L.D. Rotter ◽  
Z.L. Wang ◽  
J.P. Cline ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Electron Diffraction ◽  
Harmonic Generation ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Second Harmonic ◽  
Chemical Vapor ◽  
X Ray ◽  
Metalorganic Chemical

ABSTRACTMetalorganic chemical vapor deposition (MOCVD) was used to deposit epitaxial BaTiO3 thin films on (100) MgO substrates at 600°C. The metalorganic precursors employed in the deposition experiments were hydrated Ba(thd)2 (thd = C11H19O2) and titanium isopropoxide. The films were analyzed by means of transmittance spectroscopy, wavelength dispersive x-ray spectrometry, secondary ion mass spectrometry depth profiling, x-ray diffraction, high resolution transmission electron microscopy, selected area electron diffraction, nanoscale energy dispersive x-ray spectrometry and second harmonic generation measurements. There was no evidence for interdiffusion between the film and substrate. The x-ray and electron diffraction studies showed that the films were oriented with the a-axis normal to the substrate surface, whereas second harmonic generation measurements showed that the films had some c-axis character.

Characteristics of Gallium Oxide Nanowires Synthesized by the Metalorganic Chemical Vapor Deposition

2007 ◽  
Vol 539-543 ◽  
pp. 1230-1235 ◽  
Author(s):  
Hyoun Woo Kim ◽  
S.H. Shim
Keyword(s):  
Chemical Vapor Deposition ◽  
Cross Sections ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Metalorganic Chemical

We have synthesized the high-density Ga2O3 nanowires on gold (Au)-coated silicon substrates using metalorganic chemical vapor deposition. The nanowires exhibited one-dimensional structures having circular cross sections with diameters in the range of 30-200 nm. The energy dispersive x-ray spectroscopy revealed that the nanowires contained elements of Ga and O, without Au-related impurities. X-ray diffraction analysis and high-resolution transmission electron microscopy showed that the Ga2O3 nanowires were crystalline.

Monitoring of indium x-ray peak to optimize InxGa1-xN layer grown by metalorganic chemical vapor deposition

1996 ◽  
Vol 449 ◽  
Author(s):  
Hongqiang Lu ◽  
Malathi Thothathiri ◽  
Ziming Wu ◽  
Ishwara Bhat
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Quantitative Measure ◽  
Chemical Vapor ◽  
Droplet Formation ◽  
X Ray Diffraction ◽  
Growth Technique ◽  
X Ray ◽  
Metalorganic Chemical

ABSTRACTIndium droplet formation during the epitaxial growth of InxGa1-xN films is a serious problem for achieving high quality films with high indium mole fraction. In this paper, we studied the formation of indium droplets on the InxGa1-xN films grown by metalorganic chemical vapor deposition (MOCVD) using single crystal x-ray diffraction. It is found that the indium (101) peak in the x-ray diffraction spectra can be utilized as a quantitative measure to determine the amounts of indium droplets on the film. It is shown by monitoring the indium diffraction peak that the density of indium droplets increases at lower growth temperature. To suppress these indium droplets, a modulation growth technique is used. Indium droplet formation in the modulation growth is investigated and it is revealed in our study that the indium droplets problem has been partially relieved by the modulation growth technique.

scholarly journals Synchrotron Radiation X-Ray Absorption Spectroscopy and Spectroscopic Ellipsometry Studies of InSb Thin Films on GaAs Grown by Metalorganic Chemical Vapor Deposition

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Yingda Qian ◽  
Yuanlan Liang ◽  
Xuguang Luo ◽  
Kaiyan He ◽  
Wenhong Sun ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Synchrotron Radiation ◽  
Absorption Spectroscopy ◽  
Spectroscopic Ellipsometry ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Chemical Vapor ◽  
X Ray ◽  
X Ray Absorption ◽  
Metalorganic Chemical

A series of ultrathin InSb films grown on GaAs by low-pressure metalorganic chemical vapor deposition with different V/III ratios were investigated thoroughly using spectroscopic ellipsometry (SE), X-ray diffraction, and synchrotron radiation X-ray absorption spectroscopy. The results predicted that InSb films on GaAs grown under too high or too low V/III ratios are with poor quality, while those grown with proper V/III ratios of 4.20–4.78 possess the high crystalline quality. The temperature-dependent SE (20–300°C) and simulation showed smooth variations of SE spectra, optical constants (n, k, e1, and ε2), and critical energy points (E1, E1+Δ1, E′0, E2, and E′1) for InSb film when temperature increased from 20°C to 250°C, while at 300°C, large changes appeared. Our study revealed the oxidation of about two atomic layers and the formation of an indium-oxide (InO) layer of ∼5.4 nm. This indicates the high temperature limitation for the use of InSb/GaAs materials, up to 250°C.

Detection and Analysis of Phase Separation in Metalorganic Chemical Vapor Deposition InGaN

1997 ◽  
Vol 482 ◽  
Author(s):  
E. L. Piner ◽  
N. A. El-Masry ◽  
S. X. Liu ◽  
S. M. Bedair
Keyword(s):  
Chemical Vapor Deposition ◽  
Phase Separation ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Single Phase ◽  
Chemical Vapor ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Metalorganic Chemical

AbstractInGaN films in the 0–50% InN composition range have been analyzed for the occurrence of phase separation. The ñ0.5 jum thick InGaN films were grown by metalorganic chemical vapor deposition (MOCVD) in the 690 to 780°C temperature range and analyzed by θ−20 x-ray diffraction (XRD), transmission electron microscopy (TEM), and selected area diffraction (SAD). As-grown films with up to 21% InN were single phase. However, for films with 28% InN and higher, the samples showed a spinodally decomposed microstructure as confirmed by TEM and extra spots in SAD patterns that corresponded to multiphase InGaN. An explanation of the data based on the GaN-InN pseudo-binary phase diagram is discussed.

Sign in / Sign up

Export Citation Format

Share Document