Experimental, Statistical and Simulation Study on Spring-back Behavior in Incremental Sheet Metal Forming (ISMF) Process

2011 ◽  
Author(s):  
Alireza Vahdati ◽  
Mehdi Vahdati ◽  
Francisco Chinesta ◽  
Yvan Chastel ◽  
Mohamed El Mansori
Keyword(s):  
Sheet Metal ◽  
Simulation Study ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Spring Back ◽  
Incremental Sheet Metal Forming

An Analytical Model to Reduce Spring-Back in Incremental Sheet Metal Forming (ISMF) Process

2009 ◽  
Vol 83-86 ◽  
pp. 1113-1120 ◽  
Author(s):  
Mehdi Vahdati ◽  
Mohammad Sedighi ◽  
Hossein Khoshkish
Keyword(s):  
Sheet Metal ◽  
Process Parameters ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Sheet Thickness ◽  
Spring Back ◽  
Step Size ◽  
Influence Of Process Parameters ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter

In this paper, spring-back and its effect on geometrical and dimensional accuracy of incremental sheet metal forming (ISMF) process has been studied. The influence of process parameters such as: vertical step size, sheet thickness, tool diameter, feed rate and spindle speed have been investigated. A series of experimental tests have been carried out for a straight groove bead-shape part made of aluminum sheets. A reliable statistical analysis has been carried out to extract the importance of each parameter. The obtained model permits to select appropriate process parameters to reduce spring-back effectively.

Preliminary Studies on the Determination of FLD for Single Point Incremental Sheet Metal Forming

2012 ◽  
Vol 504-506 ◽  
pp. 863-868 ◽  
Author(s):  
Miklos Tisza ◽  
Péter Zoltán Kovács ◽  
Zsolt Lukács
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
New Technologies ◽  
Single Point ◽  
Research Work ◽  
Dimensional Accuracy ◽  
Forming Limit ◽  
Incremental Sheet Metal Forming

Development of new technologies and processes for small batch and prototype production of sheet metal components has a very important role in the recent years. The reason is the quick and efficient response to the market demands. For this reasons new manufacturing concepts have to be developed in order to enable a fast and reliable production of complex components and parts without investing in special forming machines. The need for flexible forming processes has been accelerated during the last 15 years, and by these developments the technology reaches new extensions. Incremental sheet metal forming (ISMF) may be regarded as one of the promising developments for these purposes. A comprehensive research work is in progress at the University of Miskolc (Hungary) to study the effect of important process parameters with particular emphasis on the shape and dimensional accuracy of the products and particularly on the formability limitations of the process. In this paper, some results concerning the determination of forming limit diagrams for single point incremental sheet metal forming will be described.

scholarly journals Effect of Process Parameters and Preheating Temperature on Surface Roughness and Thickness Distribution in Hole Flanging using Incremental Sheet Metal Forming

2019 ◽  
Vol 8 (12S2) ◽  
pp. 84-87
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Thickness Distribution ◽  
Research Work ◽  
Preheating Temperature ◽  
Incremental Sheet Metal Forming ◽  
Best Parameter ◽  
Hole Flanging

Incremental Sheet metal forming is a die less method of forming which offers high formability. In this research work; effect of step depth, tool rotation speed and preheating temperature on surface roughness and thinning of flange wall is investigated in hole flanging using incremental forming. The parameter optimization is carried out by Taguchi method. Grey relational analysis is carried out to obtain best parameter combination.

scholarly journals Influence of process parameters on surface roughness and forming time of Al-1100 sheet in incremental sheet metal forming

2019 ◽  
Vol 13 (2) ◽  
pp. 4911-4927
Author(s):  
Swagatika Mohanty ◽  
Srinivasa Prakash Regalla ◽  
Yendluri Venkata Daseswara Rao
Keyword(s):  
Surface Roughness ◽  
Response Surface ◽  
Sheet Metal ◽  
Process Parameters ◽  
Sheet Metal Forming ◽  
Feed Rate ◽  
Metal Forming ◽  
Wall Angle ◽  
Surface Method ◽  
Incremental Sheet Metal Forming

Product quality and production time are critical constraints in sheet metal forming. These are normally measured in terms of surface roughness and forming time, respectively. Incremental sheet metal forming is considered as most suitable for small batch production specifically because it is a die-less manufacturing process and needs only a simple generic fixture. The surface roughness and forming time depend on several process parameters, among which the wall angle, step depth, feed rate, sheet thickness, and spindle speed have a greater impact on forming time and surface roughness. In the present work, the effect of step depth, feed rate and wall angle on the surface roughness and forming time have been investigated for constant 1.2 mm thick Al-1100 sheet and at a constant spindle speed of 1300 rpm. Since the variable effects of these parameters necessitate multi-objective optimization, the Taguchi L9 orthogonal array has been used to plan the experiments and the significance of parameters and their interactions have been determined using analysis of variance (ANOVA) technique. The optimum response has been brought out using response surfaces. Finally, the findings of response surface method have been validated by conducting additional experiments at the intermediate values of the parameters and these results were found to be in agreement with the predictions of Taguchi method and response surface method.

Increasing the part accuracy in dieless robot-based incremental sheet metal forming

CIRP Annals ◽  
2009 ◽  
Vol 58 (1) ◽  
pp. 233-238 ◽  
Author(s):  
H. Meier ◽  
B. Buff ◽  
R. Laurischkat ◽  
V. Smukala
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Sheet Metal Forming

Decoupled Simulation Method For Incremental Sheet Metal Forming

2007 ◽  
Author(s):  
G. Sebastiani ◽  
A. Brosius ◽  
A. E. Tekkaya ◽  
W. Homberg ◽  
M. Kleiner
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Simulation Method ◽  
Incremental Sheet Metal Forming
Sign in / Sign up

Export Citation Format

Share Document