An efficient formulation to find the scattering field of a conducting cylinder coated with lossy magnetic material

1993 ◽  
Vol 73 (8) ◽  
pp. 4038-4041 ◽  
Author(s):  
Chi‐Sen Lin ◽  
M. Tahir Yaqoob
Keyword(s):  
Magnetic Material ◽  
Conducting Cylinder ◽  
Scattering Field

Magnetic Material Observation Assembly for Tem with a Eucentric Goniometer

1976 ◽  
Vol 34 ◽  
pp. 540-541
Author(s):  
K. Shi rota ◽  
A. Yonezawa ◽  
K. Shibatomi ◽  
T. Yanaka
Keyword(s):  
Magnetic Material ◽  
Electron Microscope ◽  
Magnetic Domain ◽  
Objective Lens ◽  
Magnetic Domains ◽  
Lorentz Microscopy ◽  
Transmission Electron ◽  
Correction Of Astigmatism ◽  
Single Orientation ◽  
Conventional Transmission Electron Microscope

As is well known, it is not so easy to operate a conventional transmission electron microscope for observation of magnetic materials. The reason is that the instrument requires re-alignment of the axis and re-correction of astigmatism after each specimen shift, as the lens field is greatly disturbed by the specimen. With a conventional electron microscope, furthermore, it is impossible to observe magnetic domains, because the specimen is magnetized to single orientation by the lens field. The above mentioned facts are due to the specimen usually being in the lens field. Thus, special techniques or systems are usually required for magnetic material observation (especially magnetic domain observation), for example, the technique to switch off the objective lens current and Lorentz microscopy. But these cannot give high image quality and wide magnification range, and furthermore Lorentz microscopy is very complicated.

Development of Magnetic Material for Low Loss

2019 ◽  
Vol 139 (2) ◽  
pp. 84-87
Author(s):  
Kentaro MORI ◽  
Masahiko WATANABE
Keyword(s):  
Magnetic Material ◽  
Low Loss

The study of acoustic scattering from a single sound-permeable sphere

2018 ◽  
Vol 13 (4) ◽  
pp. 79-91 ◽  
Author(s):  
E.Sh. Nasibullaeva
Keyword(s):  
Speed Of Sound ◽  
Numerical Technique ◽  
Acoustic Scattering ◽  
Computer Time ◽  
Physical Parameters ◽  
Fast Method ◽  
Scattering Field ◽  
Permeable Sphere ◽  
Test Verification ◽  
Good Agreement

The paper presents a generalized mathematical model and numerical investigation of the problem of acoustic scattering from a single sound-permeable sphere during the passage of two types of waves - spherical from a monopole radiation source and a plane one. In solving the Helmholtz equation, a numerical technique based on the fast method of multipoles is used, which allows achieving high accuracy of the results obtained at the lowest cost of computer time. The calculations are compared with known experimental data and a good agreement is obtained. The formulas for calculating the main characteristic of the scattering field (the total scattering cross section) for a sound-permeable sphere are generalized. The effect on this characteristic of the physical parameters of media outside and inside the sphere, such as the density and speed of sound, is shown. A numerical parametric analysis of the pressure distribution around a single sound-permeable sphere for different values of the wave radius, density, and speed of sound of the outer and inner medium of the sphere is carried out. The obtained results will later be used for test verification calculations for the numerical solution of the generalized problem of acoustic scattering of a set of sound-permeable spheres (coaxial or arbitrarily located in space).

scholarly journals Impact of residual stress evoked by pyramidal embossing on the magnetic material properties of non-oriented electrical steel

2021 ◽  
Author(s):  
Ines Gilch ◽  
Tobias Neuwirth ◽  
Benedikt Schauerte ◽  
Nora Leuning ◽  
Simon Sebold ◽  
...  
Keyword(s):  
Magnetic Material ◽  
Residual Stress ◽  
Magnetic Flux ◽  
Material Properties ◽  
Electrical Steel ◽  
Maximum Energy ◽  
Material Behavior ◽  
Electrical Machine ◽  
Element Analysis ◽  
Steel Sheets

AbstractTargeted magnetic flux guidance in the rotor cross section of rotational electrical machines is crucial for the machine’s efficiency. Cutouts in the electrical steel sheets are integrated in the rotor sheets for magnetic flux guidance. These cutouts create thin structures in the rotor sheets which limit the maximum achievable rotational speed under centrifugal forces and the maximum energy density of the rotating electrical machine. In this paper, embossing-induced residual stress, employing the magneto-mechanical Villari effect, is studied as an innovative and alternative flux barrier design with negligible mechanical material deterioration. The overall objective is to replace cutouts by embossings, increasing the mechanical strength of the rotor. The identification of suitable embossing geometries, distributions and methodologies for the local introduction of residual stress is a major challenge. This paper examines finely distributed pyramidal embossings and their effect on the magnetic material behavior. The study is based on simulation and measurements of specimen with a single line of twenty embossing points performed with different punch forces. The magnetic material behavior is analyzed using neutron grating interferometry and a single sheet tester. Numerical examinations using finite element analysis and microhardness measurements provide a more detailed understanding of the interaction of residual stress distribution and magnetic material properties. The results reveal that residual stress induced by embossing affects magnetic material properties. Process parameters can be applied to adjust the magnetic material deterioration and the effect of magnetic flux guidance.

scholarly journals Radiation from a monopole antenna in front of a conducting cylinder

Radio Science ◽  
2005 ◽  
Vol 40 (3) ◽  
pp. n/a-n/a
Author(s):  
Quanxin Wang ◽  
Zhongxiang Shen ◽  
Yilong Lu
Keyword(s):  
Monopole Antenna ◽  
Conducting Cylinder
Sign in / Sign up

Export Citation Format

Share Document