Development and Application of ANN Model for Worker Assignment into Virtual Cells of Large Sized Configurations

2010 ◽  
Author(s):  
R. V. Murali ◽  
A. B. Puri ◽  
Khalid Fathi ◽  
Swapan Paruya ◽  
Samarjit Kar ◽  
...  
Keyword(s):  
Ann Model ◽  
Worker Assignment ◽  
Virtual Cells

Workforce Assignment into Large-Sized Virtual Cells Using Learning Vector Quantization (LVQ) Approach

2012 ◽  
Vol 576 ◽  
pp. 705-709
Author(s):  
R.V. Murali
Keyword(s):  
Neural Networks ◽  
Vector Quantization ◽  
Manufacturing Systems ◽  
Cellular Manufacturing ◽  
Cell Formation ◽  
Learning Vector Quantization ◽  
Cellular Manufacturing Systems ◽  
Classification Rate ◽  
Worker Assignment ◽  
Virtual Cells

Much has been reported in literature on virtual cell formation problems while a limited work is reported on worker assignments. Virtual Cellular Manufacturing Systems (VCMS) have come into existence, replacing traditional Cellular Manufacturing Systems (CMS), to meet highly dynamic production conditions in terms of demand, production lots, processing times, product mix and production sequences. Although the problem of worker assignment and flexibility in cell based manufacturing environments has been studied and analyzed in plenty using various heuristics/mathematical models, application of Artificial Neural Networks (ANN), adapted from the biological neural networks, is the recent development in this field exploiting the ability of ANN to work out mathematically-difficult-to-solve problems. In this attempt, the previous work of the author has been further developed and an attempt has been made to apply Learning Vector Quantization (LVQ) approach into worker assignment problems for higher order virtual cells i.e., three cells configurations and analyze the suitability of LVQ approach in terms of successful classification rate and simulation parameters for a number of VCMS periods.

Physico-Chemical Analysis of Groundwater and Effect of Climatic Change in Angul-Talcher Area

2018 ◽  
Vol 6 (12) ◽  
pp. 26
Author(s):  
Aliva Bera ◽  
D.P. Satapathy
Keyword(s):  
Water Resources ◽  
Linear Regression ◽  
Regression Model ◽  
Climatic Change ◽  
Linear Regression Model ◽  
Ann Model ◽  
Quality Of Water ◽  
Physico Chemical ◽  
Simulation Based

In this paper, the linear regression model using ANN and the linear regression model using MS Excel were developed to estimate the physico-chemical concentrations in groundwater using pH, EC, TDS, TH, HCO3 as input parameters and Ca, Mg and K as output parameters. A comparison was made which indicated that ANN model had the better ability to estimate the physic-chemical concentrations in groundwater. An analytical survey along with simulation based tests for finding the climatic change and its effect on agriculture and water bodies in Angul-Talcher area is done. The various seasonal parameters such as pH, BOD, COD, TDS,TSS along with heavy elements like Pb, Cd, Zn, Cu, Fe, Mn concentration in water resources has been analyzed. For past 30 years rainfall data has been analyzed and water quality index values has been studied to find normal and abnormal quality of water resources and matlab based simulation has been done for performance analysis. All results has been analyzed and it is found that the condition is stable. 

The Spinning Quality Control Management Based on Decision Making by Data Mining Techniques

2018 ◽  
Vol 7 (1) ◽  
pp. 72
Author(s):  
Khalid AA Abakar ◽  
Chongwen Yu
Keyword(s):  
Data Mining ◽  
Kernel Functions ◽  
Support Vector ◽  
Ann Model ◽  
Data Mining Techniques ◽  
Yarn Quality ◽  
Yarn Properties ◽  
Svm Model ◽  
Rbf Kernel

This work demonstrated the possibility of using the data mining techniques such as artificial neural networks (ANN) and support vector machine (SVM) based model to predict the quality of the spinning yarn parameters. Three different kernel functions were used as SVM kernel functions which are Polynomial and Radial Basis Function (RBF) and Pearson VII Function-based Universal Kernel (PUK) and ANN model were used as data mining techniques to predict yarn properties. In this paper, it was found that the SVM model based on Person VII kernel function (PUK) have the same performance in prediction of spinning yarn quality in comparison with SVM based RBF kernel. The comparison with the ANN model showed that the two SVM models give a better prediction performance than an ANN model.

QSAR Study of PARP Inhibitors by GA-MLR, GA-SVM and GA-ANN Approaches

2020 ◽  
Vol 16 (8) ◽  
pp. 1088-1105
Author(s):  
Nafiseh Vahedi ◽  
Majid Mohammadhosseini ◽  
Mehdi Nekoei
Keyword(s):  
Present Report ◽  
Principal Component ◽  
Parp Inhibitors ◽  
Support Vector ◽  
Ann Model ◽  
Statistical Parameters ◽  
Qsar Study ◽  
Data Set ◽  
Test Set ◽  
Non Linear

Background: The poly(ADP-ribose) polymerases (PARP) is a nuclear enzyme superfamily present in eukaryotes. Methods: In the present report, some efficient linear and non-linear methods including multiple linear regression (MLR), support vector machine (SVM) and artificial neural networks (ANN) were successfully used to develop and establish quantitative structure-activity relationship (QSAR) models capable of predicting pEC50 values of tetrahydropyridopyridazinone derivatives as effective PARP inhibitors. Principal component analysis (PCA) was used to a rational division of the whole data set and selection of the training and test sets. A genetic algorithm (GA) variable selection method was employed to select the optimal subset of descriptors that have the most significant contributions to the overall inhibitory activity from the large pool of calculated descriptors. Results: The accuracy and predictability of the proposed models were further confirmed using crossvalidation, validation through an external test set and Y-randomization (chance correlations) approaches. Moreover, an exhaustive statistical comparison was performed on the outputs of the proposed models. The results revealed that non-linear modeling approaches, including SVM and ANN could provide much more prediction capabilities. Conclusion: Among the constructed models and in terms of root mean square error of predictions (RMSEP), cross-validation coefficients (Q2 LOO and Q2 LGO), as well as R2 and F-statistical value for the training set, the predictive power of the GA-SVM approach was better. However, compared with MLR and SVM, the statistical parameters for the test set were more proper using the GA-ANN model.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

Questions to the Article: An Artificial Intelligence Model to Predict the Mortality of COVID-19 Patients at Hospital Admission Time Using Routine Blood Samples (Preprint)

2020 ◽  
Author(s):  
Shu-Chun Kuo ◽  
CHIEN WEI ◽  
Willy Chou
Keyword(s):  
Data Entry ◽  
Ann Model ◽  
Model Accuracy ◽  
Data Format ◽  
Raw Data ◽  
Probability Of Survival ◽  
Testing Data ◽  
Laboratory Results ◽  
Data Yield ◽  
Artificial Neural Network Ann

UNSTRUCTURED The recent article published on December 23 27 in 2020 is well-written and of interest, but remains several questions that are required for clarifications, including (1) 30 feature variables with normalized format(mean=0 and SD=1) required to compare model accuracy with those with the raw-data format; (2)inconsistency in variable numbers between entry and preview panels in Figure 4 and reference typos; and (3) data-entry format with raw blood laboratory results in Figure 4 inconsistent with the model designed using normalized data to estimate parameters. We conducted a study using the training and testing data provided by the previous study. An artificial neural network(ANN) model was performed to estimate parameters and compare the model accuracy with those eight models provided by the previous study. We found that (1) normalized data yield higher accuracy than that with the raw data; (2) typos definitely exist at the bottom review (=32>30 variables in the entry) panels in Figure 4 and typos in Table 6; and (3)the ANN earns a probability of survival(=0.91) higher than that(=0.71) in the previous study using the similar entry data when the raw data are assumed in the app. We also demonstrated an author-made app using the visualization to display the prediction result, which is novel and innovative to make the result improved with a dashboard in comparison with the previous study.

scholarly journals A Hybrid Artificial Intelligence Model to Predict the Elastic Behavior of Sandstone Rocks

2019 ◽  
Vol 11 (19) ◽  
pp. 5283 ◽  
Author(s):  
Gowida ◽  
Moussa ◽  
Elkatatny ◽  
Ali
Keyword(s):  
Poisson’S Ratio ◽  
Accurate Determination ◽  
Oil And Gas Industry ◽  
Poisson's Ratio ◽  
Elastic Behavior ◽  
Percentage Error ◽  
Ann Model ◽  
Field Development ◽  
Well Completion

Rock mechanical properties play a key role in the optimization process of engineering practices in the oil and gas industry so that better field development decisions can be made. Estimation of these properties is central in well placement, drilling programs, and well completion design. The elastic behavior of rocks can be studied by determining two main parameters: Young’s modulus and Poisson’s ratio. Accurate determination of the Poisson’s ratio helps to estimate the in-situ horizontal stresses and in turn, avoid many critical problems which interrupt drilling operations, such as pipe sticking and wellbore instability issues. Accurate Poisson’s ratio values can be experimentally determined using retrieved core samples under simulated in-situ downhole conditions. However, this technique is time-consuming and economically ineffective, requiring the development of a more effective technique. This study has developed a new generalized model to estimate static Poisson’s ratio values of sandstone rocks using a supervised artificial neural network (ANN). The developed ANN model uses well log data such as bulk density and sonic log as the input parameters to target static Poisson’s ratio values as outputs. Subsequently, the developed ANN model was transformed into a more practical and easier to use white-box mode using an ANN-based empirical equation. Core data (692 data points) and their corresponding petrophysical data were used to train and test the ANN model. The self-adaptive differential evolution (SADE) algorithm was used to fine-tune the parameters of the ANN model to obtain the most accurate results in terms of the highest correlation coefficient (R) and the lowest mean absolute percentage error (MAPE). The results obtained from the optimized ANN model show an excellent agreement with the laboratory measured static Poisson’s ratio, confirming the high accuracy of the developed model. A comparison of the developed ANN-based empirical correlation with the previously developed approaches demonstrates the superiority of the developed correlation in predicting static Poisson’s ratio values with the highest R and the lowest MAPE. The developed correlation performs in a manner far superior to other approaches when validated against unseen field data. The developed ANN-based mathematical model can be used as a robust tool to estimate static Poisson’s ratio without the need to run the ANN model.

scholarly journals Predicting the 14-Day Hospital Readmission of Patients with Pneumonia Using Artificial Neural Networks (ANN)

2021 ◽  
Vol 18 (10) ◽  
pp. 5110
Author(s):  
Shu-Farn Tey ◽  
Chung-Feng Liu ◽  
Tsair-Wei Chien ◽  
Chin-Wei Hsu ◽  
Kun-Chen Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Early Stage ◽  
Characteristic Curve ◽  
Patient Discharge ◽  
Ann Model ◽  
Healthcare Settings ◽  
High Area ◽  
Icd 10 ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Unplanned patient readmission (UPRA) is frequent and costly in healthcare settings. No indicators during hospitalization have been suggested to clinicians as useful for identifying patients at high risk of UPRA. This study aimed to create a prediction model for the early detection of 14-day UPRA of patients with pneumonia. We downloaded the data of patients with pneumonia as the primary disease (e.g., ICD-10:J12*-J18*) at three hospitals in Taiwan from 2016 to 2018. A total of 21,892 cases (1208 (6%) for UPRA) were collected. Two models, namely, artificial neural network (ANN) and convolutional neural network (CNN), were compared using the training (n = 15,324; ≅70%) and test (n = 6568; ≅30%) sets to verify the model accuracy. An app was developed for the prediction and classification of UPRA. We observed that (i) the 17 feature variables extracted in this study yielded a high area under the receiver operating characteristic curve of 0.75 using the ANN model and that (ii) the ANN exhibited better AUC (0.73) than the CNN (0.50), and (iii) a ready and available app for predicting UHA was developed. The app could help clinicians predict UPRA of patients with pneumonia at an early stage and enable them to formulate preparedness plans near or after patient discharge from hospitalization.

Sign in / Sign up

Export Citation Format

Share Document