Some electrical properties of amorphous silicon/amorphous silicon nitride interfaces: Top nitride and bottom nitride configurations in MNS and TFT devices

1992 ◽  
Vol 71 (10) ◽  
pp. 5022-5032 ◽  
Author(s):  
C. Godet ◽  
J. Kanicki ◽  
A. V. Gelatos
1986 ◽  
Vol 68 ◽  
Author(s):  
Nancy Voke ◽  
Jerzy Kanicki

Hydrogenated amorphous silicon nitride films, prepared in various commercially available plasma enhanced chemical vapor deposition systems, have been investigated in terms of different deposition conditions.The full characterization of these gate insulators has been carried out by different techniques.Experimental data and interesting findings obtained from this study are presented.Special attention has been devoted to the influence of hydrogen on optical and electrical properties.


2021 ◽  
Vol 5 (3) ◽  
Author(s):  
Jeffrey L. Braun ◽  
Sean W. King ◽  
Eric R. Hoglund ◽  
Mehrdad Abbasi Gharacheh ◽  
Ethan A. Scott ◽  
...  

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 354
Author(s):  
Qianqian Liu ◽  
Xiaoxuan Chen ◽  
Hongliang Li ◽  
Yanqing Guo ◽  
Jie Song ◽  
...  

Luminescent amorphous silicon nitride-containing dense Si nanodots were prepared by using very-high-frequency plasma-enhanced chemical vapor deposition at 250 °C. The influence of thermal annealing on photoluminescence (PL) was studied. Compared with the pristine film, thermal annealing at 1000 °C gave rise to a significant enhancement by more than twofold in terms of PL intensity. The PL featured a nanosecond recombination dynamic. The PL peak position was independent of the excitation wavelength and measured temperatures. By combining the Raman spectra and infrared absorption spectra analyses, the enhanced PL was suggested to be from the increased density of radiative centers related to the Si dangling bonds (K0) and N4+ or N20 as a result of bonding configuration reconstruction.


1989 ◽  
Vol 4 (2) ◽  
pp. 394-398 ◽  
Author(s):  
V. S. Kaushik ◽  
A. K. Datye ◽  
D. L. Kendall ◽  
B. Martinez-Tovar ◽  
D. S. Simons ◽  
...  

Implantation of nitrogen at 150 KeV and a dose of 1 ⊠ 1018/cm2 into (110) silicon results in the formation of an amorphized layer at the mean ion range, and a deeper tail of nitrogen ions. Annealing studies show that the amorphized layer recrystallizes into a continuous polycrystalline Si3N4 layer after annealing for 1 h at 1200 °C. In contrast, the deeper nitrogen fraction forms discrete precipitates (located 1μm below the wafer surface) in less than 1 min at this temperature. The arcal density of these precipitates is 5 ⊠ 107/cm2 compared with a nuclei density of 1.6 ⊠ 105/cm2 in the amorphized layer at comparable annealing times. These data suggest that the nucleation step limits the recrystallization rate of amorphous silicon nitride to form continuous buried nitride layers. The nitrogen located within the damaged crystalline silicon lattice precipitates very rapidly, yielding semicoherent crystallites of β–Si3N4.


Sign in / Sign up

Export Citation Format

Share Document