STUDY OF PLUME BEHAVIOUR TWO HEATED CYLINDERS AT HIGH RAYLEIGH NUMBER USING LATTICE BOLTZMANN METHOD

2010 ◽  
Author(s):  
A. R. M. Rosdzimin ◽  
N. A. C. Sidik ◽  
S. M. Zuhairi ◽  
M. A. Wahid ◽  
S. Samion ◽  
...  
Keyword(s):  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Boltzmann Method

Natural convection heat transfer of nanofluid inside a cavity containing rough elements using lattice Boltzmann method

2019 ◽  
Vol 29 (10) ◽  
pp. 3659-3684 ◽  
Author(s):  
Rasul Mohebbi ◽  
Mohsen Izadi ◽  
Nor Azwadi Che Sidik ◽  
Gholamhassan Najafi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Convection Heat ◽  
Nanofluid Flow ◽  
Content Type ◽  
Boltzmann Method

Purpose This paper aims to study the natural convection of a nanofluid inside a cavity which contains obstacles using lattice Boltzmann method (LBM). The results have focused mainly on various parameters such as number and aspect ratio of roughness elements and different nanoparticle volume fraction. The isotherms and streamlines are presented to describe the hydrodynamics and thermal behaviors of the nanofluid flow throughout the enclosure. Design/methodology/approach The methodology of this paper consists of mathematical model, statement of the problem, nanofluid thermophysical properties, lattice Boltzmann method, LBM for fluid flow, LBM for heat transfer, numerical strategy, boundary conditions, Nusselt (Nu) number calculation, code validation and grid independence. Findings Natural convection heat transfers of a nanofluid inside cavities with and without rough elements have been studied. Lattice Boltzmann technique has been used as numerical approach. The results showed that at higher Rayleigh number (Ra = 106), there are denser streamlines near the left (source) and right wall (sink) which results in better cooling and enhances convective heat rejection to the heat sink. After a distinctive aspect ratio of rough elements (A = 0.1), change in streamline pattern which arises from increasing of aspect ratio does not have an important effect on isotherms. Results indicate that for lower Rayleigh number (Ra = 103), no variation in average Nu is observed with increasing in number of roughness, while for higher one (Ra = 106) average Nu decreases from N = 0 (smooth cavity) up to N = 4 and then remains constant (N = 6). Originality/value Currently, no argumentative and comprehensive extraction can be concluded without fully understanding the role of different arrangement of roughness. Some geometrical parameters such as aspect ratio, number and position of rough elements have been considered. Also, the effect of nanoparticle concentration was studied at different Ra number. Briefly, using LBM, this paper aims to investigate the natural convection of a nanofluid flow on the thermal and hydrodynamics parameters in the presence of rough element with various arrangements.

Numerical analysis of free convection and entropy generation in a cavity using compact finite-difference lattice Boltzmann method

2019 ◽  
Vol 30 (2) ◽  
pp. 977-995 ◽  
Author(s):  
HamidReza KhakRah ◽  
Payam Hooshmand ◽  
David Ross ◽  
Meysam Jamshidian
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Finite Difference ◽  
Free Convection ◽  
Lattice Boltzmann Method ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Purpose The purpose of this paper is to investigate the compact finite-difference lattice Boltzmann method is used to simulate the free convection within a cavity. Design/methodology/approach The finite-difference discretization method enables the numerical simulations to be run when there are non-uniform and curvilinear grids with a finer near-wall grid resolution. Furthermore, the high-order method is applied in the numerical approach, which makes it possible to go with relatively coarse mesh in respect to simulations, which used classical lattice Boltzmann method. The configuration of the cavity is set to sine-walled square. In addition, the cavity is filled with Al2O3-water nanofluid, and the Koo–Kleinstreuer–Li model is used to estimate the properties of nanofluid. Findings The nanoparticle (Al2O3) concentration in the base fluid (water) is considered in a range of 0-0.04. The nanofluid flow and heat transfer are investigated in laminar regime with Rayleigh number in the range of 103-106. The second law analysis is used to study the effects of different governing parameters on the local and volumetric entropy generation. The Rayleigh number, configuration of the cavity and nanoparticle concentration are considered as the governing parameters. The results are mainly focused on the flow structure, temperature field, local and volumetric entropy generation and heat transfer performance. Originality/value The originality of this study is using of a modern numerical method supported by an accurate prediction for nanofluid properties to simulate the flow and heat transfer during natural convection in a cavity.

High Rayleigh Number Natural Convection Inside 2D Porous Enclosures Using the Lattice Boltzmann Method

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
Ramanathan Vishnampet ◽  
Arunn Narasimhan ◽  
V. Babu
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Parallel Implementation ◽  
Form Drag ◽  
Energy Equations ◽  
Boltzmann Method ◽  
Rayleigh Numbers

Lattice Boltzmann method (LBM) is employed to investigate natural convection inside porous medium enclosures at high Rayleigh numbers. Volume averaged porous medium model is coupled with the lattice Boltzmann formulation of the momentum and energy equations for fluid flow. A parallel implementation of the single relaxation time LBM is used, which allows the porous medium modified Rayleigh number Ram to be as high as 108. Heat transfer results in the form of the enclosure averaged Nusselt number Nu are obtained for higher modified Rayleigh numbers 104≤Ram≤108. The Nu values are compared with values in the absence of the form drag term. The form drag due to the porous medium is found to influence Nu considerably. The effect of the form drag on Nu is studied by using a form drag modified Rayleigh number RaC (extended from Ram). Utilizing the results for Nu in the high Ram range, a correlation is proposed between Nu and RaC for Darcy numbers 10−6≤Da≤10−2, encompassing the non-Darcy flow regime.

scholarly journals Modeling the CO2Sequestration Convection Problem Using the Lattice Boltzmann Method

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Hassen M. Ouakad
Keyword(s):  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Convective Instability ◽  
Convection Problem ◽  
Boltzmann Method ◽  
Mixing Problem ◽  
Rayleigh Numbers ◽  
Rayleigh Benard ◽  
State Concentration

This paper presents an investigation of the density-driven problem that rises during the CO2sequestration into saline aquifer. The lattice Boltzmann method (LBM) is implemented in a way to solve this mixing problem (the brine problem along with the solute transport). The CO2-brine interface was located at the top of the considered domain. Different Rayleigh numbers were used in order to investigate this problem. When Rayleigh number is low, we got steady-state concentration contours describing a Rayleigh-Bénard type of convection. Moreover, when the Rayleigh number was selected to be big enough, we observe that the system is less stable and a convective fingering is initiated. This instability is caused by a higher density difference between the brine and the sequestrated CO2. Note here that the turbulence is not taken into account in the study. After the onset this convective instability, the brine with a high CO2concentration migrates down into the porous medium. This study is based on a statistical LBM theory without assuming periodicity in any directions and without considering any type of disturbances in order to turnon the instability behavior.

Lattice Boltzmann Method for Combined Natural Convection Surface Radiation in Open Cavity

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
Ayoub Msaddak ◽  
Mohieddine Ben Salah ◽  
Ezeddine Sediki
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Inclination Angle ◽  
Lattice Boltzmann ◽  
Surface Radiation ◽  
Surface Emissivity ◽  
Boltzmann Method

Lattice Boltzmann method (LBM) is performed to study numerically combined natural convection and surface radiation inside an inclined two-dimensional open square cavity. The cavity is heated by a constant temperature at the wall facing the opening. The walls normal to the heated surface are assumed to be adiabatic, diffuse, gray, and opaque while the open boundary is assumed to be black at ambient temperature. A Bathnagar, Gross and Krook (BGK) collision model with double distribution function (D2Q9-D2Q4) is adopted. Effects of surface radiation, inclination angle, and Rayleigh number on the heat transfer are analyzed and discussed. Results are presented in terms of isotherms, streamlines, and Nusselt number. It was found that the presence of surface radiation enhances the heat transfer. The convective Nusselt number decreases with increasing surface emissivity as well as with Rayleigh number, while the total Nusselt number increases with increasing surface emissivity and Rayleigh number. The inclination angle has also a significant effect on flow and heat transfer inside the cavity. However, the magnitude of total heat transfer decreases considerably when open cavity is tilted downward.

Lattice Boltzmann simulation of convective flow and heat transfer in a nanofluid-filled hollow cavity

2019 ◽  
Vol 29 (9) ◽  
pp. 3075-3094
Author(s):  
Qiang Pu ◽  
Farhad Aalizadeh ◽  
Darya Aghamolaei ◽  
Mojtaba Masoumnezhad ◽  
Alireza Rahimi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Heat Transfer Performance ◽  
Transfer Performance ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Purpose This paper aims to to simulate the flow and heat transfer during free convection in a square cavity using double-multi-relaxation time (MRT) lattice Boltzmann method. Design/methodology/approach The double-MRT lattice Boltzmann method is used, and the natural convection fluid flow and heat transfer under influence of different parameters are analyzed. The D2Q5 model and D2Q9 model are used for simulation of temperature field and flow field, respectively. The cavity is filled with CuO-water nanofluid; in addition, the thermo-physical properties of nanofluid and the effect of nanoparticles’ shapes are considered using Koo–Kleinstreuer–Li (KKL) model. On the other hand, the cavity is included with an internal active hollow with constant thermal boundary conditions at its walls and variable dimensions. It should be noted that the dimensions of the internal hollow will be determined by as aspect ratio. Findings The Rayleigh number, nanoparticle concentration and the aspect ratio are the governing parameters. The heat transfer performance of the cavity has direct relationship with the Rayleigh number and solid volume fraction of CuO-water nanofluid. Moreover, the configuration of the cavity is good controlling factor for changing the heat transfer performance and entropy generation. Originality/value The originality of this work is using double-MRT lattice Boltzmann method in simulating the free convection fluid flow and heat transfer.

Effects of cavity and heat source aspect ratios on natural convection of a nanofluid in a C-shaped cavity using Lattice Boltzmann method

2018 ◽  
Vol 28 (8) ◽  
pp. 1930-1955 ◽  
Author(s):  
Mohsen Izadi ◽  
Rasul Mohebbi ◽  
A. Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat Source ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Average Nusselt Number ◽  
Content Type ◽  
Boltzmann Method

PurposeThe purpose of this paper is to consider natural convection of a nanofluid inside of a C-shaped cavity using Lattice Boltzmann method (LBM).Design/methodology/approachEffects of some geometry and flow parameters consisting of the aspect ratio of the cavity, aspect ratio of the heat source; Rayleigh number (Ra = 103− 106) have been investigated. The validity of the method is checked by comparing the present results with ones from the previously published work.FindingsThe results demonstrate that for Ra = 103, the aspect ratio of the heat source has more influence on the average Nusselt number in contrast to the case of Ra = 106. Contrary to the fact that the average Nusselt number increases non-linearly more than twice because of the increase of the aspect ratio of the enclosure at Ra = 103, the average Nusselt number has a linear relation with the aspect ratio for of Ra = 106. Therefore, upon increasing the Rayleigh number, the efficiency of the aspect ratio of the cavity on the thermal convection, gradually diminishes.Originality/valueThe authors believe that all the results, both numerical and asymptotic, are original and have not been published elsewhere.

Lattice Boltzmann Method Simulation on Flow Patterns of Natural Convection in Horizontal Cylindrical Annulus

2013 ◽  
Author(s):  
Mo Yang ◽  
Yuwei Zhou ◽  
Yuwen Zhang ◽  
Enjie Bian ◽  
Zheng Li
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Flow Patterns ◽  
Aspect Ratios ◽  
Cylindrical Annulus ◽  
Prandtl Numbers ◽  
Boltzmann Method ◽  
Good Agreement

The Lattice Boltzmann method is used to simulate the flow patterns of natural convection in horizontal cylindrical annulus for aspect ratios in the range of 0.4≤A≤10 and for Prandtl numbers varying from 0.1 to 0.7. At Pr = 0.3 and A = 2, flow patterns on the whole range of Rayleigh number are mapped indicating the lower and upper critical values for transitions. At Pr = 0.7, the influence of aspect ratio on flow pattern is analyzed acquiring the result that the oscillation flow never happens at A≤3. At A = 2, several Prandtl numbers are calculated at certain Rayleigh number and the conclusion is that the steady upward flow keeps when 0.5≤Pr. The results are found in good agreement with existed studies.

Sign in / Sign up

Export Citation Format

Share Document