Pulse number dependence of laser-induced periodic surface structures for femtosecond laser irradiation of silicon

2010 ◽  
Vol 108 (3) ◽  
pp. 034903 ◽  
Author(s):  
Jörn Bonse ◽  
Jörg Krüger
Keyword(s):  
Femtosecond Laser ◽  
Laser Irradiation ◽  
Pulse Number ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Periodic Surface

Ultrafast Laser Induced Subwavelength Periodic Surface Structures on Semiconductors/Metals and Application to SERS Studies

MRS Advances ◽  
2016 ◽  
Vol 1 (49) ◽  
pp. 3317-3327 ◽  
Author(s):  
V. Saikiran ◽  
Mudasir H Dar ◽  
R. Kuladeep ◽  
Narayana Rao Desai
Keyword(s):  
Femtosecond Laser ◽  
Laser Irradiation ◽  
Gold Film ◽  
Low Frequency ◽  
Surface Enhanced Raman Spectroscopy ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Gold Films ◽  
Periodic Surface ◽  
Different Thickness

ABSTRACTIn this manuscript a simple approach is discussed to fabricate uniform periodic surface structures on semiconductor surfaces by femtosecond laser irradiation for surface-enhanced Raman spectroscopy (SERS) applications. Gold films having different thickness are first deposited on semiconductor silicon (Si) surfaces and then periodic surface structures are fabricated by femtosecond laser irradiation. The periodic structures are observed to be uniform over a large area with chain type structure formation of gold and Si. We have studied the formation of these surface structures on Si surface by having different thickness gold films deposited on Si substrates. This approach of the fabrication of surface structures with the assistance of gold film is found to help in local field enhancement and hence work as suitable substrate for the SERS experiments. The conditions for achieving high enhancement factor in SERS with different gold film thicknesses are explored in detail. We also present here the formation of low frequency ripples on Silicon (Si) and high frequency as well as low frequency ripples on titanium (Ti) surface in air and water environments by irradiation with fs laser pulses. Different morphologies were observed on Ti surface depending upon the laser irradiation parameters and the surrounding dielectric medium.

scholarly journals Fabricating Femtosecond Laser-Induced Periodic Surface Structures with Electrophysical Anisotropy on Amorphous Silicon

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 42
Author(s):  
Dmitrii Shuleiko ◽  
Mikhail Martyshov ◽  
Dmitrii Amasev ◽  
Denis Presnov ◽  
Stanislav Zabotnov ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Laser Irradiation ◽  
Volume Fraction ◽  
Femtosecond Laser Pulses ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Nanocrystalline Phase ◽  
Near Surface ◽  
Periodic Surface ◽  
Relief Formation

One-dimensional periodic surface structures were formed by femtosecond laser irradiation of amorphous hydrogenated silicon (a-Si:H) films. The a-Si:H laser processing conditions influence on the periodic relief formation as well as correlation of irradiated surfaces structural properties with their electrophysical properties were investigated. The surface structures with the period of 0.88 and 1.12 μm were fabricated at the laser wavelength of 1.25 μm and laser pulse number of 30 and 750, respectively. The orientation of the surface structure is defined by the laser polarization and depends on the concentration of nonequilibrium carriers excited by the femtosecond laser pulses in the near-surface region of the film, which affects a mode of the excited surface electromagnetic wave which is responsible for the periodic relief formation. Femtosecond laser irradiation increases the a-Si:H films conductivity by 3 to 4 orders of magnitude, up to 1.2 × 10−5 S∙cm, due to formation of Si nanocrystalline phase with the volume fraction from 17 to 28%. Dark conductivity and photoconductivity anisotropy, observed in the irradiated a-Si:H films is explained by a depolarizing effect inside periodic microscale relief, nonuniform crystalline Si phase distribution, as well as different carrier mobility and lifetime in plane of the studied samples along and perpendicular to the laser-induced periodic surface structures orientation, that was confirmed by the measured photoconductivity and absorption coefficient spectra.

Formation of laser-induced periodic surface structures on niobium by femtosecond laser irradiation

2014 ◽  
Vol 115 (17) ◽  
pp. 173101 ◽  
Author(s):  
A. Pan ◽  
A. Dias ◽  
M. Gomez-Aranzadi ◽  
S. M. Olaizola ◽  
A. Rodriguez
Keyword(s):  
Femtosecond Laser ◽  
Laser Irradiation ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Periodic Surface

Reduced bacterial adhesion on zirconium-based bulk metallic glasses by femtosecond laser nanostructuring

2019 ◽  
Vol 234 (4) ◽  
pp. 387-397 ◽  
Author(s):  
Cezhi Du ◽  
Chengyong Wang ◽  
Tao Zhang ◽  
Xin Yi ◽  
Jianyi Liang ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Laser Irradiation ◽  
Metallic Glasses ◽  
Bacterial Adhesion ◽  
Bulk Metallic Glasses ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Adhesion Properties ◽  
Nanostructured Surfaces

As high-performing materials, bulk metallic glasses have attracted widespread attention for biomedical applications. Herein, the bacterial adhesion properties of femtosecond laser-nanostructured surfaces of four types of zirconium-based bulk metallic glasses are assessed. Laser-induced periodical surface structures and nanoparticle structures were fabricated by femtosecond laser irradiation under different energy intensities (0.23 and 2.3 J/mm2). Surface topography, roughness, wettability, and surface energy were investigated after femtosecond laser irradiation and the surface bacterial adhesion properties were explored using Escherichia coli and Staphylococcus aureus as respective representatives of Gram-negative and Gram-positive bacteria. 4′,6-Diamidino-2-phenylindole fluorescence staining was used to characterize and assess the bacterial surface coverage rate. The in vitro cytotoxicity of polished and laser-nanostructured surfaces was investigated using MC3T3-E cells. The obtained results demonstrate that femtosecond laser surface nanostructuring retained the amorphous structure of zirconium-based bulk metallic glasses and led to an obvious decrease in bacterial adhesion compared with polished surfaces. The inhibition of bacterial adhesion on laser-induced periodical surface structures was greater than on nanostructured surfaces after 24 h of bacterial incubation. In addition, femtosecond laser nanostructuring did not have an apparent effect on the cytotoxicity of zirconium-based bulk metallic glasses.

scholarly journals Key role of surface plasmon polaritons in generation of periodic surface structures following single-pulse laser irradiation of a gold step edge

Nanophotonics ◽  
2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Pavel N. Terekhin ◽  
Jens Oltmanns ◽  
Andreas Blumenstein ◽  
Dmitry S. Ivanov ◽  
Frederick Kleinwort ◽  
...  
Keyword(s):  
Laser Irradiation ◽  
Surface Plasmon ◽  
Surface Plasmon Polaritons ◽  
Single Pulse ◽  
Step Edge ◽  
Surface Structures ◽  
Femtosecond Laser Irradiation ◽  
Processing Technologies ◽  
Periodic Surface ◽  
Plasmon Polaritons

Abstract Understanding the mechanisms and controlling the possibilities of surface nanostructuring is of crucial interest for both fundamental science and application perspectives. Here, we report a direct experimental observation of laser-induced periodic surface structures (LIPSS) formed near a predesigned gold step edge following single-pulse femtosecond laser irradiation. Simulation results based on a hybrid atomistic-continuum model fully support the experimental observations. We experimentally detect nanosized surface features with a periodicity of ∼300 nm and heights of a few tens of nanometers. We identify two key components of single-pulse LIPSS formation: excitation of surface plasmon polaritons and material reorganization. Our results lay a solid foundation toward simple and efficient usage of light for innovative material processing technologies.

Sign in / Sign up

Export Citation Format

Share Document