Photoluminescence studies of high-quality InAlN layer lattice-matched to GaN grown by metal organic chemical vapor deposition

2010 ◽  
Vol 96 (19) ◽  
pp. 191911 ◽  
Author(s):  
Z. T. Chen ◽  
Y. Sakai ◽  
T. Egawa
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
High Quality ◽  
Metal Organic ◽  
Photoluminescence Studies ◽  
Organic Chemical Vapor Deposition ◽  
Lattice Matched

Crack-free high quality 2 μm-thick Al0.5Ga0.5N grown on a Si substrate with a superlattice transition layer

CrystEngComm ◽  
2020 ◽  
Vol 22 (7) ◽  
pp. 1160-1165 ◽  
Author(s):  
Yingnan Huang ◽  
Jianxun Liu ◽  
Xiujian Sun ◽  
Xiaoning Zhan ◽  
Qian Sun ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Transition Layer ◽  
Smooth Surface ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Si Substrate ◽  
High Quality ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

We reported the successful growth of a crack-free high-quality 2 μm-thick Al0.5Ga0.5N film with a smooth surface grown on planar Si by metal–organic chemical vapor deposition.

Epitaxial Growth of “Strain-Free” Indium Oxide Films on (111) Yttria-Stabilized Zirconia by Metal-Organic Chemical Vapor Deposition

2020 ◽  
Vol 1014 ◽  
pp. 22-26
Author(s):  
Yi Zhuo ◽  
Zi Min Chen ◽  
Sheng Dong Zhang
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Thick Layer ◽  
Chemical Vapor ◽  
Yttria Stabilized Zirconia ◽  
Organic Chemical ◽  
Stabilized Zirconia ◽  
High Quality ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

In this work, In2O3 thin films were grown on (111) yttria-stabilized zirconia (YSZ) by metal-organic chemical vapor deposition (MOCVD) at different temperature. It is found that samples grown at low temperature showed lower residual stress but higher mosaicity while high growth temperatures could also cause deterioration in crystal quality due to increasing lattice mismatch. To obtain high quality In2O3 film with low residual strain, a 30-nm thick layer grown at 530 °C was introduced as buffer layer, considering both stress relaxation and crystalline mosaicity. By using two-step growth method, a 400 nm-thick, high quality, near-strain-free In2O3 thin film with the full width at half maximum (FWHM) values of (222) diffraction peaks being as narrow as 648 arcsec was successfully obtained.

Sign in / Sign up

Export Citation Format

Share Document