Investigation on nonedible vegetable oil as a compression ignition engine fuel in sustaining the energy and environment

2010 ◽  
Vol 2 (1) ◽  
pp. 013108 ◽  
Author(s):  
S. Saravanan ◽  
G. Nagarajan ◽  
G. Lakshmi Narayana Rao
Keyword(s):  
Vegetable Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Energy And Environment

Wear Assessment in a Biodiesel Fueled Compression Ignition Engine

2003 ◽  
Vol 125 (3) ◽  
pp. 820-826 ◽  
Author(s):  
A. K. Agarwal ◽  
J. Bijwe ◽  
L. M. Das
Keyword(s):  
Coefficient Of Friction ◽  
Linseed Oil ◽  
Diesel Oil ◽  
Lubricating Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Metal Debris ◽  
Wear Rates ◽  
Biodiesel Blend

Biodiesel is prepared using linseed oil and methanol by the process of transesterification. Use of linseed oil methyl ester (LOME) in a compression ignition engine was found to develop a highly compatible engine-fuel system with low emission characteristics. Two similar engines were operated using optimum biodiesel blend and mineral diesel oil, respectively. These were subjected to long-term endurance tests. Lubricating oil samples drawn from both engines after a fixed interval were subjected to elemental analysis. Quantification of various metal debris concentrations was done by atomic absorption spectroscopy (AAS). Wear metals were found to be about 30% lower for a biodiesel-operated engine system. Lubricating oil samples were also subjected to ferrography indicating lower wear debris concentrations for a biodiesel-operated engine. The additional lubricating property of LOME present in the fuel resulted in lower wear and improved life of moving components in a biodiesel-fuelled engine. However, this needed experimental verification and quantification. A series of experiments were thus conducted to compare the lubricity of various concentrations of LOME in biodiesel blends. Long duration tests were conducted using reciprocating motion in an SRV optimol wear tester to evaluate the coefficient of friction, specific wear rates, etc. The extent of damage, coefficient of friction, and specific wear rates decreased with increase in the percentage of LOME in the biodiesel blend. Scanning electron microscopy was conducted on the surfaces exposed to wear. The disk and pin using 20% biodiesel blend as the lubricating oil showed lesser damage compared to the one subjected to diesel oil as the lubricating fluid, confirming additional lubricity of biodiesel.

Production, Performance and Emissions of Biodiesel as Compression Ignition Engine Fuel

2013 ◽  
Author(s):  
Ambarish Datta ◽  
Bijan Kumar Mandal
Keyword(s):  
Production Performance ◽  
Biodiesel Production ◽  
Current Status ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Oxides Of Nitrogen ◽  
Waste Frying Oil ◽  
Compression Ignition Engine ◽  
Performance And Emission ◽  
Ci Engines

The enhanced use of diesel fuel and the strict emission norms for the protection of environment have necessitated finding sustainable alternative and relatively green fuels for compression ignition engines. This paper presents a brief review on the current status of biodiesel production and its performance and emission characteristics as compression ignition engine fuel. This study is based on the reports on biodiesel fuels published in the current literature by different researchers. Biodiesel can be produced from crude vegetable oil, non-edible oil, waste frying oil, animal tallow and also from algae by a chemical process called transesterification. Biodiesel is also called methyl or ethyl ester of the corresponding feed stocks from which it has been produced. Biodiesel is completely miscible with diesel oil, thus allowing the use of blends of mineral diesel and biodiesel in any percentage. Presently, biodiesel is blended with mineral diesel and used commercially as fuel in many countries. Biodiesel fueled CI engines perform more or less in the same way as that fueled with the mineral diesel. Exhaust emissions are significantly improved due the use of biodiesel or blends of biodiesel and mineral diesel. The oxides of nitrogen are found to be greater in exhaust in case of biodiesel compared to mineral diesel. But the higher viscosity of biodiesel also enhances the lubricating property. Biodiesel being an oxygenated fuel improves combustion.

Sign in / Sign up

Export Citation Format

Share Document