scholarly journals Variation of impurity−to−band activation energies with impurity density

1975 ◽  
Vol 46 (1) ◽  
pp. 373-380 ◽  
Author(s):  
T. F. Lee ◽  
T. C. McGill
Keyword(s):  
Activation Energies ◽  
Impurity Density

Deep level study in epitaxial 4H-SiC grown on substrates inclined toward

2002 ◽  
Vol 719 ◽  
Author(s):  
Masashi Kato ◽  
Masaya Ichimura ◽  
Eisuke Arai ◽  
Shigehiro Nishino
Keyword(s):  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Activation Energies ◽  
Thickness Dependence ◽  
Epitaxial Layers ◽  
Transient Spectroscopy

AbstractEpitaxial layers of 4H-SiC are grown on (0001) substrates inclined toward <1120> and <1100> directions. Defects in these films are characterized by deep level transient spectroscopy (DLTS) in order to clarify the dependence of concentrations and activation energies on substrate inclination. DLTS results show no such dependence on substrate inclination but show thickness dependence of the concentration.

Activation energies of technological termodonors in neutron doped silicon

2015 ◽  
Vol 19 (1/2) ◽  
Author(s):  
L. I. Panasjuk ◽  
V. V. Kolomoets ◽  
V. N. Ermakov ◽  
S. A. Fedosov ◽  
L. V. Yashchynskiy
Keyword(s):  
Activation Energies ◽  
Doped Silicon

Kinetics of esterification of monoisopropylphenols with phosphoryl trichloride

1989 ◽  
Vol 54 (5) ◽  
pp. 1311-1317
Author(s):  
Miroslav Magura ◽  
Ján Vojtko ◽  
Ján Ilavský
Keyword(s):  
Liquid Phase ◽  
Rate Constants ◽  
Reaction Rates ◽  
Activation Energies ◽  
The Individual ◽  
Kinetics Of

The kinetics of liquid-phase isothermal esterification of POCl3 with 2-isopropylphenol and 4-isopropylphenol have been studied within the temperature intervals of 110 to 130 and 90 to 110 °C, respectively. The rate constants and activation energies of the individual steps of this three-step reaction have been calculated from the values measured. The reaction rates of the two isomers markedly differ: at 110 °C 4-isopropylphenol reacts faster by the factors of about 7 and 20 for k1 and k3, respectively. This finding can be utilized in preparation of mixed triaryl phosphates, since the alkylation mixture after reaction of phenol with propene contains an excess of 2-isopropylphenol over 4-isopropylphenol.

scholarly journals Machine learning meets mechanistic modelling for accurate prediction of experimental activation energies

2021 ◽  
Author(s):  
Kjell Jorner ◽  
Tore Brinck ◽  
Per-Ola Norrby ◽  
David Buttar
Keyword(s):  
Machine Learning ◽  
Activation Energies ◽  
Accurate Prediction ◽  
Nucleophilic Aromatic Substitution ◽  
Aromatic Substitution ◽  
Mechanistic Modelling

Hybrid reactivity models, combining mechanistic calculations and machine learning with descriptors, are used to predict barriers for nucleophilic aromatic substitution.

scholarly journals Migration of mineral oil in elastomers

2021 ◽  
Author(s):  
Tobias Förster ◽  
Artur Blivernitz
Keyword(s):  
Diffusion Coefficients ◽  
Mineral Oil ◽  
Activation Energies ◽  
Concentration Profiles ◽  
Small Reservoir ◽  
Experimental Procedure ◽  
Mineral Oils ◽  
The Absolute ◽  
Suitable Measure

AbstractThis work describes a newly introduced experimental procedure to quantify the diffusion progress of mineral oils locally resolved in NBR. Diffusion of reference oils IRM 901, IRM 902 and IRM 903 in NBR with various acrylonitrile contents was investigated. Classical sorption experiments were performed as a basic characterization and compared to the newly introduced method. Here, elastomer specimens are only being dipped with the bottom in a relatively small reservoir of mineral oil. This provides a determination of locally resolved concentration profiles of mineral oils, and the calculation of diffusion coefficients. These diffusion coefficients follow the same trends like those determined via sorption experiments. Despite differences in the absolute numbers, activation energies of diffusion can be applied as a suitable measure for the compatibility of elastomers and fluids.

scholarly journals Physical properties and water absorption kinetics of three varieties of Mucuna beans

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ajibola B. Oyedeji ◽  
Olajide P. Sobukola ◽  
Ezekiel Green ◽  
Oluwafemi A. Adebo
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Rate Constant ◽  
Geometric Mean ◽  
Seed Mass ◽  
Activation Energies ◽  
Mucuna Pruriens ◽  
Absorption Kinetics ◽  
Kinetics Of ◽  
Soaking Temperature

AbstractThe physical properties and water absorption kinetics of three varieties of Mucuna beans (Mucuna pruriens, Mucuna rajada and Mucuna veracruz) were determined in this study. Physical properties including length, width, thickness, geometric mean diameter, sphericity, porosity, bulk density, area, volume and one thousand seed mass were calculated while hydration kinetics was studied by soaking Mucuna beans in water at 30 °C, 40 °C and 50 °C and measuring water uptake at 9 h interval. Peleg’s equation was used to model the hydration characteristics and Arrhenius equation was used to describe the effect of temperature on Peleg’s rate constant k1 and to obtain the activation energies for soaking. Significant variations were observed in almost all the physical properties of the different varieties, however, there were no significant differences (p < 0.05) in their thicknesses and bulk densities. The effectiveness of fit of Peleg’s model (R2) increased with increase in soaking temperature. Peleg’s rate constant k1 decreased with increase in soaking temperature while k2 increased with temperature increase. Activation energies of Mucuna pruriens, Mucuna rajada and Mucuna veracruz were 1613.24 kJ/mol, 747.95 kJ/mol and 2743.64 kJ/mol, respectively. This study provides useful information about the properties of three varieties of Mucuna beans that could be of importance to processors and engineers for process design and optimization.

scholarly journals High-Temperature Deformation of Naturally Aged 7010 Aluminum Alloy

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 581
Author(s):  
Abdulhakim A. Almajid
Keyword(s):  
Activation Energy ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Threshold Stress ◽  
Activation Energies ◽  
Temperature Deformation ◽  
High Temperature Range ◽  
Temperature Range ◽  
True Activation Energy ◽  
Two Temperatures

This study is focused on the deformation mechanism and behavior of naturally aged 7010 aluminum alloy at elevated temperatures. The specimens were naturally aged for 60 days to reach a saturated hardness state. High-temperature tensile tests for the naturally aged sample were conducted at different temperatures of 573, 623, 673, and 723 K at various strain rates ranging from 5 × 10−5 to 10−2 s−1. The dependency of stress on the strain rate showed a stress exponent, n, of ~6.5 for the low two temperatures and ~4.5 for the high two temperatures. The apparent activation energies of 290 and 165 kJ/mol are observed at the low, and high-temperature range, respectively. These values of activation energies are greater than those of solute/solvent self-diffusion. The stress exponents, n, and activation energy observed are rather high and this indicates the presence of threshold stress. This behavior occurred as a result of the dislocation interaction with the second phase particles that are existed in the alloy at the testing temperatures. The threshold stress decreases in an exponential manner as temperature increases. The true activation energy was computed by incorporating the threshold stress in the power-law relation between the stress and the strain. The magnitude of the true activation energy, Qt dropped to 234 and 102 kJ/mol at the low and high-temperature range, respectively. These values are close to that of diffusion of Zinc in Aluminum and diffusion of Magnesium in Aluminum, respectively. The Zener–Hollomon parameter for the alloy was developed as a function of effective stress. The data in each region (low and high-temperature region) coalescence in a segment line in each region.

The kinetics of hydration of tricalcium silicate

1970 ◽  
Vol 48 (21) ◽  
pp. 3291-3299 ◽  
Author(s):  
K. G. McCurdy ◽  
B. P. Erno
Keyword(s):  
Reaction Mechanism ◽  
Intermediate Product ◽  
Activation Energies ◽  
Tricalcium Silicate ◽  
Rate Data ◽  
Large Excess ◽  
First Order ◽  
Kinetics Of ◽  
Subsequent Decomposition

An investigation has been made of the kinetics of hydration of tricalcium silicate at several temperatures in a large excess of water in the presence of various added ions. The rate data have been interpreted by a reaction mechanism which involves: (a) the first order hydration of tricalcium silicate to form an intermediate product, 1.5CaO•SiO2, which can react by two pathways, (b) the direct first order decomposition of intermediate, 1.5CaO•SiO2, to form lime and silica or (b′) complexing of intermediate with silica and subsequent decomposition to form lime and silica. This reaction mechanism predicts the rate of production of base during the hydration. The effect of various added ions is interpreted in terms of the proposed mechanism.Rate constants and activation energies for the various steps in the proposed mechanism are reported.

Sign in / Sign up

Export Citation Format

Share Document