Low-energy ordered structures of Li2Mg(NH)2

2008 ◽  
Vol 104 (8) ◽  
pp. 083519 ◽  
Author(s):  
Zhu Ma ◽  
M. Y. Chou
Keyword(s):  
Low Energy ◽  
Ordered Structures

Faceting in dilute oxygen atmospheres of group VIA metals

1972 ◽  
Vol 331 (1586) ◽  
pp. 429-443 ◽  
Keyword(s):  
Activation Energy ◽  
Electron Diffraction ◽  
Smooth Surface ◽  
High Energy ◽  
Low Energy ◽  
Energy Electron ◽  
High Energy Electron ◽  
Ordered Structures ◽  
Surface Parameters ◽  
Chemisorbed Oxygen

Certain planes of the group VIA metals, Cr, Mo and W, which are stable in ultra high vacua, readily develop facets when heated at low homologous temperatures in oxygen pressures as low as 10 -6 Pa. We have investigated the (100) and (110) surfaces of these metals by both low energy and reflexion mode high-energy electron diffraction. The (100) surfaces of tungsten and molybdenum readily develop facets which are of {110} and {211} type. The faceting is preceded by the formation of various ordered structures characteristic of chemisorbed oxygen. The (100) surface of chromium is stable in oxygen; however, the (110) surface develops {100} facets. No simple ordered structures are observed on the (110) surface of chromium before faceting and the facets soon disappear beneath epitaxially grown oxide. On all three metals the faceting process is reversible. The smooth surface may be regenerated by heating in the absence of oxygen. The activation energy for this process is high. The effect of faceting on surface parameters is discussed with particular reference to the growth of oxide.

Ordered Structures of Poly(p-hydroxybenzoic acid). 2. Low-Energy Chain-Packing Structures

1996 ◽  
Vol 29 (4) ◽  
pp. 1286-1295 ◽  
Author(s):  
Natalia V. Lukasheva ◽  
Thomas Mosell ◽  
Alla Sariban ◽  
Jürgen Brickmann
Keyword(s):  
Low Energy ◽  
Hydroxybenzoic Acid ◽  
Ordered Structures ◽  
Chain Packing ◽  
Energy Chain

The structure of pre-mRNA and mRNA from erythroid cells

1978 ◽  
Vol 36 (2) ◽  
pp. 234-235
Author(s):  
A.-M. Ladhoff ◽  
B.J. Thiele ◽  
Ch. Coutelle ◽  
S. Rosenthal
Keyword(s):  
Bone Marrow ◽  
Structural Transformation ◽  
Electron Micrographs ◽  
Ammonium Acetate ◽  
Bone Marrow Cells ◽  
Erythroid Cells ◽  
Globin Mrna ◽  
Ordered Structures ◽  
Rabbit Bone ◽  
Rabbit Reticulocytes

The suggested precursor-product relationship between the nuclear pre-mRNA and the cytoplasmic mRNA has created increased interest also in the structure of these RNA species. Previously we have been published electron micrographs of individual pre-mRNA molecules from erythroid cells. An intersting observation was the appearance of a contour, probably corresponding to higher ordered structures, on one end of 10 % of the pre-mRNA molecules from erythroid rabbit bone marrow cells (Fig. 1A). A virtual similar contour was observed in molecules of 9S globin mRNA from rabbit reticulocytes (Fig. 1B). A structural transformation in a linear contour occurs if the RNA is heated for 10 min to 90°C in the presence of 80 % formamide. This structural transformation is reversible when the denatured RNA is precipitated and redissolved in 0.2 M ammonium acetate.

Specific Labeling of Protein Domains with Antibody Fragments

1981 ◽  
Vol 39 ◽  
pp. 416-417
Author(s):  
U. Aebi ◽  
L.E. Buhle ◽  
W.E. Fowler
Keyword(s):  
Image Processing ◽  
Specific Protein ◽  
Antibody Fragments ◽  
Supramolecular Organization ◽  
Two Dimensional ◽  
Ordered Structures ◽  
Virus Capsids ◽  
Processing Techniques

Many important supramolecular structures such as filaments, microtubules, virus capsids and certain membrane proteins and bacterial cell walls exist as ordered polymers or two-dimensional crystalline arrays in vivo. In several instances it has been possible to induce soluble proteins to form ordered polymers or two-dimensional crystalline arrays in vitro. In both cases a combination of electron microscopy of negatively stained specimens with analog or digital image processing techniques has proven extremely useful for elucidating the molecular and supramolecular organization of the constituent proteins. However from the reconstructed stain exclusion patterns it is often difficult to identify distinct stain excluding regions with specific protein subunits. To this end it has been demonstrated that in some cases this ambiguity can be resolved by a combination of stoichiometric labeling of the ordered structures with subunit-specific antibody fragments (e.g. Fab) and image processing of the electron micrographs recorded from labeled and unlabeled structures.

Dissociated Σ=27 boundaries in silicon

1988 ◽  
Vol 46 ◽  
pp. 624-625
Author(s):  
A. Garg ◽  
W.A.T. Clark ◽  
J.P. Hirth
Keyword(s):  
Electron Diffraction ◽  
Local Minimum ◽  
Boundary Energy ◽  
Coincidence Site Lattice ◽  
Boundary Plane ◽  
Low Energy ◽  
Theoretical Understanding ◽  
Site Lattice ◽  
Kikuchi Pattern ◽  
Analysis Techniques

In the last twenty years, a significant amount of work has been done in the theoretical understanding of grain boundaries. The various proposed grain boundary models suggest the existence of coincidence site lattice (CSL) boundaries at specific misorientations where a periodic structure representing a local minimum of energy exists between the two crystals. In general, the boundary energy depends not only upon the density of CSL sites but also upon the boundary plane, so that different facets of the same boundary have different energy. Here we describe TEM observations of the dissociation of a Σ=27 boundary in silicon in order to reduce its surface energy and attain a low energy configuration.The boundary was identified as near CSL Σ=27 {255} having a misorientation of (38.7±0.2)°/[011] by standard Kikuchi pattern, electron diffraction and trace analysis techniques. Although the boundary appeared planar, in the TEM it was found to be dissociated in some regions into a Σ=3 {111} and a Σ=9 {122} boundary, as shown in Fig. 1.

Transfer optics for high spatial resolution electron spectroscopy

1988 ◽  
Vol 46 ◽  
pp. 666-667
Author(s):  
G. G. Hembree ◽  
Luo Chuan Hong ◽  
P.A. Bennett ◽  
J.A. Venables
Keyword(s):  
Magnetic Field ◽  
Scanning Transmission Electron Microscope ◽  
Low Energy ◽  
Objective Lens ◽  
State University ◽  
Arizona State University ◽  
Initial Field ◽  
Resolution Electron ◽  
Scanning Transmission ◽  
Low Energy Electrons

A new field emission scanning transmission electron microscope has been constructed for the NSF HREM facility at Arizona State University. The microscope is to be used for studies of surfaces, and incorporates several surface-related features, including provision for analysis of secondary and Auger electrons; these electrons are collected through the objective lens from either side of the sample, using the parallelizing action of the magnetic field. This collimates all the low energy electrons, which spiral in the high magnetic field. Given an initial field Bi∼1T, and a final (parallelizing) field Bf∼0.01T, all electrons emerge into a cone of semi-angle θf≤6°. The main practical problem in the way of using this well collimated beam of low energy (0-2keV) electrons is that it is travelling along the path of the (100keV) probing electron beam. To collect and analyze them, they must be deflected off the beam path with minimal effect on the probe position.

EMCAT: An automatic image-processing system for electron-microscopic tomography

1994 ◽  
Vol 52 ◽  
pp. 418-419
Author(s):  
Weiping Liu ◽  
John W. Sedat ◽  
David A. Agard
Keyword(s):  
Image Processing ◽  
Structural Information ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Processing System ◽  
Electron Microscopic ◽  
Data Set ◽  
Ordered Structures ◽  
Automatic Image Processing ◽  
Em Tomography

Any real world object is three-dimensional. The principle of tomography, which reconstructs the 3-D structure of an object from its 2-D projections of different view angles has found application in many disciplines. Electron Microscopic (EM) tomography on non-ordered structures (e.g., subcellular structures in biology and non-crystalline structures in material science) has been exercised sporadically in the last twenty years or so. As vital as is the 3-D structural information and with no existing alternative 3-D imaging technique to compete in its high resolution range, the technique to date remains the kingdom of a brave few. Its tedious tasks have been preventing it from being a routine tool. One keyword in promoting its popularity is automation: The data collection has been automated in our lab, which can routinely yield a data set of over 100 projections in the matter of a few hours. Now the image processing part is also automated. Such automations finish the job easier, faster and better.

Performance Evaluation of a Novel Type of Low-Energy Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 354-355
Author(s):  
Bertholdand Senftinger ◽  
Helmut Liebl
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Field Strength ◽  
Numerical Aperture ◽  
Low Energy ◽  
Energy Electron ◽  
High Resolution Imaging ◽  
Lens System ◽  
Resolution Imaging ◽  
Low Energy Electron

During the last few years the investigation of clean and adsorbate-covered solid surfaces as well as thin-film growth and molecular dynamics have given rise to a constant demand for high-resolution imaging microscopy with reflected and diffracted low energy electrons as well as photo-electrons. A recent successful implementation of a UHV low-energy electron microscope by Bauer and Telieps encouraged us to construct such a low energy electron microscope (LEEM) for high-resolution imaging incorporating several novel design features, which is described more detailed elsewhere.The constraint of high field strength at the surface required to keep the aberrations caused by the accelerating field small and high UV photon intensity to get an improved signal-to-noise ratio for photoemission led to the design of a tetrode emission lens system capable of also focusing the UV light at the surface through an integrated Schwarzschild-type objective. Fig. 1 shows an axial section of the emission lens in the LEEM with sample (28) and part of the sample holder (29). The integrated mirror objective (50a, 50b) is used for visual in situ microscopic observation of the sample as well as for UV illumination. The electron optical components and the sample with accelerating field followed by an einzel lens form a tetrode system. In order to keep the field strength high, the sample is separated from the first element of the einzel lens by only 1.6 mm. With a numerical aperture of 0.5 for the Schwarzschild objective the orifice in the first element of the einzel lens has to be about 3.0 mm in diameter. Considering the much smaller distance to the sample one can expect intense distortions of the accelerating field in front of the sample. Because the achievable lateral resolution depends mainly on the quality of the first imaging step, careful investigation of the aberrations caused by the emission lens system had to be done in order to avoid sacrificing high lateral resolution for larger numerical aperture.

Sign in / Sign up

Export Citation Format

Share Document