Shock-bubble interactions: Features of divergent shock-refraction geometry observed in experiments and simulations

2008 ◽  
Vol 20 (3) ◽  
pp. 036101 ◽  
Author(s):  
Devesh Ranjan ◽  
John H. J. Niederhaus ◽  
Jason G. Oakley ◽  
Mark H. Anderson ◽  
Riccardo Bonazza ◽  
...  
Keyword(s):  
Bubble Interactions ◽  
Shock Refraction

Numerical Examination of Jets Induced by Multi-Bubble Interactions

2018 ◽  
Author(s):  
Joydip Mondal ◽  
Arpit Mishra ◽  
Rajaram Lakkaraju ◽  
Parthasarathi Ghosh
Keyword(s):  
Target Location ◽  
Effluent Treatment ◽  
Tannery Effluent ◽  
Particle Erosion ◽  
Coverage Area ◽  
Transient Behaviour ◽  
Bubble Interactions ◽  
Time Histories ◽  
The Many ◽  
Fictitious Particle

Jets produced by the interaction of collapsing cavitating bubbles containing high-pressure gases can be utilized for wide variety of applications e.g. particle erosion, medical purposes (lithotripsy, sonoporation), tannery effluent treatment, etc. Among the many parameters, this jetting is largely influenced by spatial orientation of bubbles, their times of inception, relative bubble size ratio. In this context, multiple cavitating bubbles are able to generate numerous simultaneous jets, under suitable conditions, hence operating over a wider coverage area. Such multi-bubble arrangements can go a long way in enhancing the erosive impact on a target location even at cryogenic temperature (< 123 K) and hence necessitate investigation. In this paper, different configurations of multiple-bubble interactions are numerically simulated to examine jets directed towards a target location (fictitious particle, cell etc.) using computational fluid dynamics. No phase change is considered and the effect of gravity is neglected. The transient behaviour of the interface between the two interacting fluids (bubble and ambient liquid) is modelled using VOF (volume of fluid) method. In this paper, results obtained for different bubble configurations through numerical simulation are validated against suitable literature and further explored to assess the resulting jet effects. The time histories of interacting bubbles are presented and the consequent flow-fields are evaluated by the pressure and velocity distributions obtained. The same calculation is repeated in cryogenic environment and the results are compared. An attempt is made to approach towards an optimum arrangement and conditions for particle erosion.

Modeling of contactless bubble–bubble interactions in microchannels with integrated inertial pumps

2021 ◽  
Vol 33 (4) ◽  
pp. 042002
Author(s):  
B. Hayes ◽  
G. L. Whiting ◽  
R. MacCurdy
Keyword(s):  
Bubble Interactions

Aerodynamic Measurements on the Interaction of Secondary Jets and Separation Bubble

2012 ◽  
Author(s):  
A. Samson ◽  
S. Sarkar
Keyword(s):  
Flat Plate ◽  
Large Scale ◽  
Separation Bubble ◽  
Three Dimensional ◽  
Leading Edge ◽  
Bubble Interactions ◽  
Separated Shear Layer ◽  
Bubble Length ◽  
Flow Visualizations ◽  
Turbulence Generation

The dynamics of separation bubble under the influence of continuous jets ejected near the semi-circular leading edge of a flat plate is presented. Two different streamwise injection angles 30° and 60° and velocity ratios 0.5 and 1 for Re = 25000 and 55000 (based on the leading-edge diameter) are considered here. The flow visualizations illustrating jet and separated layer interactions have been carried out with PIV. The objective of this study is to understand the mutual interactions of separation bubble and the injected jets. It is observed that flow separates at the blending point of semi-circular arc and flat plate. The separated shear layer is laminar up to 20% of separation length after which perturbations are amplified and grows in the second-half of the bubble leading to breakdown and reattachment. Blowing has significantly affected the bubble length and thus, turbulence generation. Instantaneous flow visualizations supports the unsteadiness and development of three-dimensional motions leading to formation of Kelvin-Helmholtz rolls and shedding of large-scale vortices due to jet and bubble interactions. In turn, it has been seen that both the spanwise and streamwise dilution of injected air is highly influenced by the separation bubble.

scholarly journals A new cavitation model based on bubble-bubble interactions

2018 ◽  
Vol 30 (12) ◽  
pp. 123301 ◽  
Author(s):  
M. Adama Maiga ◽  
O. Coutier-Delgosha ◽  
D. Buisine
Keyword(s):  
Cavitation Model ◽  
Bubble Interactions ◽  
Model Based

Microscale Vapor Bubble Interactions During Subcooled Nucleate Boiling on a Heated Wire

2007 ◽  
Author(s):  
Lu Zhang ◽  
David M. Christopher
Keyword(s):  
Heat Transfer ◽  
Vapor Bubble ◽  
Boiling Heat Transfer ◽  
Nucleate Boiling ◽  
Bubble Behavior ◽  
Transfer Rates ◽  
Bubble Interactions ◽  
Heated Wire ◽  
Nucleate Boiling Heat Transfer ◽  
Transfer Mechanisms

Bubbles have been observed moving along heated wires during subcooled nucleate boiling as they are driven by Marangoni convection around the bubbles. This paper presents more detailed observations of the vapor bubble interactions and moving bubble behavior during subcooled nucleate boiling on a heated microwire. The experimental results show that moving bubbles coalesce or rebound from other bubbles and that bubbles hop on the wire. These observations show how bubble interactions significantly affect nucleate boiling heat transfer rates and how Marangoni flow plays an important role in microscale nucleate boiling heat transfer mechanisms.

Effect of kerosene emulsion in MgCl2 solution on the kinetics of bubble interactions with molybdenite and chalcopyrite

2016 ◽  
Vol 501 ◽  
pp. 98-113 ◽  
Author(s):  
Gde Pandhe Wisnu Suyantara ◽  
Tsuyoshi Hirajima ◽  
Ahmed Mohamed Elmahdy ◽  
Hajime Miki ◽  
Keiko Sasaki
Keyword(s):  
Bubble Interactions ◽  
Kinetics Of ◽  
Mgcl2 Solution
Sign in / Sign up

Export Citation Format

Share Document