Optimal expansion of a heated working fluid for maximum work output with generalized radiative heat transfer law

2007 ◽  
Vol 102 (9) ◽  
pp. 094901 ◽  
Author(s):  
Hanjiang Song ◽  
Lingen Chen ◽  
Fengrui Sun
Keyword(s):  
Heat Transfer ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Working Fluid ◽  
Work Output ◽  
Maximum Work ◽  
Maximum Work Output

scholarly journals Maximum work output of multistage continuous Carnot heat engine system with finite reservoirs of thermal capacity and radiation between heat source and working fluid

2010 ◽  
Vol 14 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Jun Li ◽  
Lingen Chen ◽  
Fengrui Sun
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Heat Sink ◽  
Heat Engine ◽  
Thermal Capacity ◽  
Working Fluid ◽  
Work Output ◽  
Maximum Work ◽  
Engine System ◽  
Maximum Work Output

Optimal temperature profile for maximum work output of multistage continuous Carnot heat engine system with two reservoirs of finite thermal capacity is determined. The heat transfer between heat source and the working fluid obeys radiation law and the heat transfer between heat sink and the working fluid obeys linear law. The solution is obtained by using optimal control theory and pseudo-Newtonian heat transfer model. It is shown that the temperature of driven fluid monotonically decreases with respect to flow velocity and process duration. The maximum work is obtained. The obtained results are compared with those obtained with infinite low temperature heat sink.

scholarly journals Effects of radiative heat transfer on the structure of turbulent supersonic channel flow

2011 ◽  
Vol 677 ◽  
pp. 417-444 ◽  
Author(s):  
S. GHOSH ◽  
R. FRIEDRICH ◽  
M. PFITZNER ◽  
CHR. STEMMER ◽  
B. CUENOT ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Radiation ◽  
Radiative Heat Transfer ◽  
Radiation Effects ◽  
Radiative Heat ◽  
Pure Water ◽  
Molecular Transport ◽  
Working Fluid ◽  
Mean Flow ◽  
Total Energy Balance

The interaction between turbulence in a minimal supersonic channel and radiative heat transfer is studied using large-eddy simulation. The working fluid is pure water vapour with temperature-dependent specific heats and molecular transport coefficients. Its line spectra properties are represented with a statistical narrow-band correlated-k model. A grey gas model is also tested. The parallel no-slip channel walls are treated as black surfaces concerning thermal radiation and are kept at a constant temperature of 1000 K. Simulations have been performed for different optical thicknesses (based on the Planck mean absorption coefficient) and different Mach numbers. Results for the mean flow variables, Reynolds stresses and certain terms of their transport equations indicate that thermal radiation effects counteract compressibility (Mach number) effects. An analysis of the total energy balance reveals the importance of radiative heat transfer, compared to the turbulent and mean molecular heat transport.

Optimal Paths for a Light-Driven Engine with [A]=[B] Reacting System and Generalized Radiative Heat Transfer Law

2012 ◽  
Vol 10 (1) ◽  
Author(s):  
Lingen Chen ◽  
Kang Ma ◽  
Fengrui Sun
Keyword(s):  
Heat Transfer ◽  
Radiative Heat Transfer ◽  
Optimal Control Theory ◽  
Radiative Heat ◽  
Working Fluid ◽  
Rate Dependent ◽  
System A ◽  
Optimal Paths ◽  
Heat Leakage ◽  
Optimal Configurations

Abstract A generalized radiative heat transfer law is introduced into an irreversible light-driven engine with a working fluid composed of the bimolecular reacting system [A]=[B], and the effects of heat transfer laws on the optimal paths of the engine are investigated in this paper. Piston paths for maximizing work output and minimizing entropy generation are determined for such an engine with rate-dependent loss mechanisms of friction and heat leakage by applying the optimal control theory. Numerical examples for the optimal configurations with three special heat transfer laws ( n=-1, n=1 and n=4 ) are provided, and the obtained results are compared with each other. The research on the optimal paths of a light-driven engine from Newton’s heat transfer law to the generalized radiative heat transfer law enriches the finite time thermodynamics. The results presented herein can provide some guidelines for optimal design and operation of real light-driven engines.

Ecological Performance of a Generalized Radiative System Light-Driven Engine (LDE) With [A] ⇌ [B] Reacting System Improved by Controlling Piston Motion

2018 ◽  
Author(s):  
Huijun Feng ◽  
Kang Ma ◽  
Lingen Chen ◽  
Shaojun Xia
Keyword(s):  
Heat Transfer ◽  
Working Fluid ◽  
Minimum Entropy ◽  
System A ◽  
Ecological Performance ◽  
Maximum Work ◽  
Far From Equilibrium ◽  
Minimum Entropy Generation ◽  
Configuration Problem ◽  
Maximum Work Output

This paper introduces the ecological criterion (EC) into the optimal configuration problem of an irreversible light-driven engine (LDE) under the assumption that heat transfer (HT) between the working fluid (WF) and the surroundings is presumed to abide by the generalized radiative heat transfer law (HTL) [q ∝ Δ(Tn) ]. The WF is made up of the reacting system [A] ⇌ [B] , and the primary irreversibilities corresponding to the practical engine are the piston friction and heat conduction with the WF operating at a nonzero rate and far from equilibrium. Meantime, in order to obtain the optimal paths (OPs) for maximum ecological performance (EP) of the engine, the optimal control theory (OCT) is utilized in this paper. Numerical calculations of the OPs at maximum EP with linear phenomenological (n = −1), Newton’s (n = 1) and radiative (n = 4) HTLs are performed. The results derived by maximum EP are compared with those derived by maximum work output (WO) and minimum entropy generation (EG) as well as different HTLs. The results obtained in this paper indicate that utilizing the maximum EC as the design objective could effectively accomplish the EG reduction with a little decrease in the WO. Moreover, the OPs for maximum EP with different HTLs are quite different.

scholarly journals Re-Optimization of Expansion Work of a Heated Working Fluid with Generalized Radiative Heat Transfer Law

Entropy ◽  
2020 ◽  
Vol 22 (7) ◽  
pp. 720 ◽  
Author(s):  
Lingen Chen ◽  
Kang Ma ◽  
Yanlin Ge ◽  
Huijun Feng
Keyword(s):  
Heat Transfer ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Heat Bath ◽  
Working Fluid ◽  
Motion Path ◽  
Process Time ◽  
Taylor Formula ◽  
Optimal Motion ◽  
Elimination Method

Based on the theoretical model of a heated ideal working fluid in the cylinder, the optimal motion path of the piston in this system, for the maximum work output, is re-studied by establishing the changed Lagrangian function and applying the elimination method when the initial internal energy, initial volume, finial volume and the process time are given and generalized radiative heat transfer law between the working fluid and heat bath is considered. The analytical solutions of the intermediate Euler-Lagrange arc with square, cubic and radiative heat transfer laws are taken as examples and obtained. The optimal motion path of the piston with cubic heat transfer law, which is obtained by applying the elimination method, is compared with that obtained by applying the Taylor formula expansion method through numerical example. The comparing result shows that the accuracy of the result which is obtained by applying the elimination method is not affected by the length of time of the expansion process of the working fluid, so this result is more universal.

Sign in / Sign up

Export Citation Format

Share Document