A high-precision five-degree-of-freedom measurement system based on laser collimator and interferometry techniques

2007 ◽  
Vol 78 (9) ◽  
pp. 095105 ◽  
Author(s):  
Cuifang Kuang ◽  
En Hong ◽  
Jun Ni
Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1830
Author(s):  
Yiheng Zhou ◽  
Baoquan Kou ◽  
He Zhang ◽  
Lu Zhang ◽  
Likun Wang

The multi-degree-of-freedom high-precision positioning system (MHPS) is one of the key technologies in many advanced industrial applications. In this paper, a novel hyperbolic magnetic field voice coil actuator using a rhombus magnet array (HMF-VCA) for MHPS is proposed. Benefiting from the especially designed rhombus magnet array, the proposed HMF-VCA has the advantage of excellent force uniformity, which makes it suitable for multi-degree-of-freedom high-precision positioning applications. First, the basic structure and operation principles of the HMF-VCA are presented. Second, the six-degree-of-freedom force and torque characteristic of the HMF-VCA is studied by three-dimensional finite element analysis (3-D FEA). Third, the influence of structural parameters on force density and force uniformity is investigated, which is conducive to the design and optimization of the HMF-VCA. Finally, a prototype is constructed, and the comparison between the HMF-VCA and conventional VCAs proves the advantage of the proposed topology.


2021 ◽  
Author(s):  
Wenqing Pan ◽  
Dengwei Zhang ◽  
Cui Liang ◽  
Chao Ma ◽  
Xiaowu Shu ◽  
...  

2011 ◽  
Vol 301-303 ◽  
pp. 959-964 ◽  
Author(s):  
Da Lin Cheng ◽  
Yi Wang ◽  
Yong Jie Ren ◽  
Xue You Yang

A novel crankshaft and camshaft measurement system by optoelectronic scanning of which a flat-crystal was used to generate high depth of parallelism scanning laser was implemented. The general structure and principle were given. Mass of test results showed that the system could achieve high precision. The ranges could achieve ±8μm, standard deviation could achieve 3μm, and easy to operate, work reliably, automatically and on line measurement could be implemented.


2010 ◽  
Vol 428-429 ◽  
pp. 487-492
Author(s):  
Xi Yin ◽  
Xiao Jun Wang ◽  
Yong Que Xie

This thesis introduces a low cost and high precision temperature cycle measurement system with adoption of PT100 as temperature sensor, with single chip computer as the core. The method of sub-three-wire connection is proposed for engineering practice, then, can eliminate the effects of lead wire resistance and simplify the external cable connection. We discuss and research circuit component selection, circuit design, improving system reliability, and a software method of piecewise linearization process is adopted, thus we ensure exact and reliable measure and the system characteristic of low cost and high precision.


2001 ◽  
Vol 47 (1) ◽  
pp. 46-55 ◽  
Author(s):  
Wentao Zheng ◽  
Y. Shishikui ◽  
Y. Kanatsugu ◽  
Y. Tanaka ◽  
I. Yuyama

2012 ◽  
Vol 241-244 ◽  
pp. 259-264 ◽  
Author(s):  
Wang Li ◽  
Gen Wang Liu ◽  
Fu He Yang

A system of miniaturized lithium battery electrochemical impedance spectroscopy (EIS) measurement is designed with high precision impedance converter chip AD5933 as its core. The measurement range of the system is from 0.010Hz to 100 KHz. Meanwhile, by using a high-level programming language of C#, an interface is developed which can real-time graphic display of EIS information. Through measurement and analysis of two types of impedance, the results show that detection precision of the system is less than 3.5%. Finally, amplitude-frequency response curves and Nyquist plots of HL-18650 M lithium battery at different state of charge (SOC) levels are measured. Compared with lithium battery EIS measurement system by traditional division, this system has the outstanding advantages of small size, high level of integration, low cost, simple operation and high precision. It is helpful to the mass production and application of lithium battery EIS measurement system.


Sign in / Sign up

Export Citation Format

Share Document