Statistical properties of streamwise velocity in a supersonic turbulent boundary layer

2007 ◽  
Vol 19 (9) ◽  
pp. 098108 ◽  
Author(s):  
B. Ganapathisubramani
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Streamwise Velocity ◽  
Statistical Properties

scholarly journals Active control of multiscale features in wall-bounded turbulence

2019 ◽  
Vol 36 (1) ◽  
pp. 12-21 ◽  
Author(s):  
Xiaotong Cui ◽  
Nan Jiang ◽  
Xiaobo Zheng ◽  
Zhanqi Tang
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Turbulent Energy ◽  
Streamwise Velocity ◽  
Discrete Wavelet ◽  
Wall Region ◽  
Mean Velocity ◽  
Pzt Actuator ◽  
The Impact ◽  
Near Wall

Abstract This study experimentally investigates the impact of a single piezoelectric (PZT) actuator on a turbulent boundary layer from a statistical viewpoint. The working conditions of the actuator include a range of frequencies and amplitudes. The streamwise velocity signals in the turbulent boundary layer flow are measured downstream of the actuator using a hot-wire anemometer. The mean velocity profiles and other basic parameters are reported. Spectra results obtained by discrete wavelet decomposition indicate that the PZT vibration primarily influences the near-wall region. The turbulent intensities at different scales suggest that the actuator redistributes the near-wall turbulent energy. The skewness and flatness distributions show that the actuator effectively alters the sweep events and reduces intermittency at smaller scales. Moreover, under the impact of the PZT actuator, the symmetry of vibration scales’ velocity signals is promoted and the structural composition appears in an orderly manner. Probability distribution function results indicate that perturbation causes the fluctuations in vibration scales and smaller scales with high intensity and low intermittency. Based on the flatness factor, the bursting process is also detected. The vibrations reduce the relative intensities of the burst events, indicating that the streamwise vortices in the buffer layer experience direct interference due to the PZT control.

Modification of Near-Wall Structure in a Shear-Driven 3-D Turbulent Boundary Layer

2001 ◽  
Vol 124 (1) ◽  
pp. 118-126 ◽  
Author(s):  
Robert O. Kiesow ◽  
Michael W. Plesniak
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Reynolds Shear Stress ◽  
Power Spectra ◽  
Streamwise Velocity ◽  
Wall Structure ◽  
Reynolds Stresses ◽  
Planar Shear ◽  
Inner Region ◽  
Near Wall

The near-wall physics of a planar, shear-driven, 3-D turbulent boundary layer with varying strengths of crossflow are examined. Flow visualization data reveals a reduction of mean streak length by as much as 50% with increasing spanwise shear. Power spectra of velocity confirm this shift towards higher temporal frequencies, corresponding to decreased streamwise length scales. PIV measurements indicate a significant modification of the inner region of the boundary layer with increasing spanwise shear. Streamwise velocity profiles exhibit an increasing velocity deficit with increased crossflow. Increased levels of the normal Reynolds stresses u′2¯ and v′2¯ and an increase in the −u′v′¯ Reynolds shear stress are also observed. Modifications in the spanwise and transverse vorticity were also observed at higher shear rates.

Statistical properties of the atmospheric turbulent boundary layer over steep surface waves

2010 ◽  
Vol 433 (1) ◽  
pp. 922-926 ◽  
Author(s):  
Yu. I. Troitskaya ◽  
D. A. Sergeev ◽  
O. S. Ermakova ◽  
G. N. Balandina
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Surface Waves ◽  
Statistical Properties

scholarly journals Correlation between Large-Scale Streamwise Velocity Features and the Height of Coherent Vortices in a Turbulent Boundary Layer

Fluids ◽  
2021 ◽  
Vol 6 (8) ◽  
pp. 286
Author(s):  
Shaurya Shrivastava ◽  
Theresa Saxton-Fox
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Wake Region ◽  
Strong Negative Correlation ◽  
Vortex Model ◽  
Image Velocimetry ◽  
Coherent Vortices ◽  
Conditional Averaging

The preferential organisation of coherent vortices in a turbulent boundary layer in relation to local large-scale streamwise velocity features was investigated. Coherent vortices were identified in the wake region using the Triple Decomposition Method (originally proposed by Kolář) from 2D particle image velocimetry (PIV) data of a canonical turbulent boundary layer. Two different approaches, based on conditional averaging and quantitative statistical analysis, were used to analyze the data. The large-scale streamwise velocity field was first conditionally averaged on the height of the detected coherent vortices and a change in the sign of the average large scale streamwise fluctuating velocity was seen depending on the height of the vortex core. A correlation coefficient was then defined to quantify this relationship between the height of coherent vortices and local large-scale streamwise fluctuating velocity. Both of these results indicated a strong negative correlation in the wake region of the boundary layer between vortex height and large-scale velocity. The relationship between vortex height and full large-scale velocity isocontours was also studied and a conceptual model based on the findings of the study was proposed. The results served to relate the hairpin vortex model of Adrian et al. to the scale interaction results reported by Mathis et al., and Chung and McKeon.

Phase Locked Analysis of a Simplified Car Geometry Wake Flow Control Using Synthetic Jet

2006 ◽  
Author(s):  
Ce´dric Leclerc ◽  
Euge´nie Levallois ◽  
Quentin Gallas ◽  
Patrick Gillie´ron ◽  
Azeddine Kourta
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Drag Reduction ◽  
Vortex Shedding ◽  
Aerodynamic Drag ◽  
Streamwise Velocity ◽  
Local Effect ◽  
Synthetic Jet ◽  
Wake Flow ◽  
Synthetic Jet Actuator

This paper presents a numerical unsteady analysis of a SJA impact on a car wake flow. First, for the optimal reduced frequency F+, the influence of the Cμ on the mean aerodynamic drag reduction 〈Cd〉 is observed. A spectral analysis of the vortex shedding coming from the upper and the lower part of the car and of the drag coefficient is then presented for different Cμ values. Preliminary results suggest that maximum drag reduction is obtained when most energy in the wake comes from the actuator forcing frequency rather than the natural vortex shedding frequencies of the two contributions. This work is completed by a phase locked analysis of the synthetic jet actuator local effect on the turbulent boundary layer just before the flow separation. For the fixed optimal F+, different Cμ values are compared. The streamwise velocity profiles seem to show that maximal efficiency of the control is obtained when the synthetic jet injected momentum is introduced in the logarithmic sub-layer part of the turbulent boundary layer.

scholarly journals Large Eddy Simulation of Microbubble Drag Reduction in Fully Developed Turbulent Boundary Layers

2020 ◽  
Vol 8 (7) ◽  
pp. 524
Author(s):  
Tongsheng Wang ◽  
Tiezhi Sun ◽  
Cong Wang ◽  
Chang Xu ◽  
Yingjie Wei
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Eddy Simulation ◽  
Drag Reduction ◽  
High Speed ◽  
Streamwise Velocity ◽  
Burst Frequency ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Good Agreement

Microbubble drag reduction has good application prospects. It operates by injecting a large number of bubbles with tiny diameters into a turbulent boundary layer. However, its mechanism is not yet fully understood. In this paper, the mechanisms of microbubble drag reduction in a fully developed turbulent boundary layer over a flat-plate is investigated using a two-way coupled Euler-Lagrange approach based on large eddy simulation. The results show good agreement with theoretical values in the velocity distribution and the distribution of fluctuation intensities. As the results show, the presence of bubbles reduces the frequency of bursts associated with the sweep events from 637.8 Hz to 611.2 Hz, indicating that the sweep events, namely the impacting of high-speed fluids on the wall surface, are suppressed and the streamwise velocity near the wall is decreased, hence reducing the velocity gradient at the wall and consequently lessening the skin friction. The suppression on burst frequency also, with the fluid fluctuation reduced in degree, decreases the intensity of vortices near the wall, leading to reduced production of turbulent kinetic energy.

On the scaling in sink-flow turbulent boundary layers

2013 ◽  
Vol 737 ◽  
pp. 329-348 ◽  
Author(s):  
Shivsai Ajit Dixit ◽  
O. N. Ramesh
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Physical Space ◽  
Streamwise Velocity ◽  
Turbulent Boundary Layers ◽  
Velocity Spectrum ◽  
Scaling Exponent ◽  
Order Of Magnitude

AbstractScaling of the streamwise velocity spectrum ${\phi }_{11} ({k}_{1} )$ in the so-called sink-flow turbulent boundary layer is investigated in this work. The present experiments show strong evidence for the ${ k}_{1}^{- 1} $ scaling i.e. ${\phi }_{11} ({k}_{1} )= {A}_{1} { U}_{\tau }^{2} { k}_{1}^{- 1} $, where ${k}_{1} $ is the streamwise wavenumber and ${U}_{\tau } $ is the friction velocity. Interestingly, this ${ k}_{1}^{- 1} $ scaling is observed much farther from the wall and at much lower flow Reynolds number (both differing by almost an order of magnitude) than what the expectations from experiments on a zero-pressure-gradient turbulent boundary layer flow would suggest. Furthermore, the coefficient ${A}_{1} $ in the present sink-flow data is seen to be non-universal, i.e. ${A}_{1} $ varies with height from the wall; the scaling exponent −1 remains universal. Logarithmic variation of the so-called longitudinal structure function, which is the physical-space counterpart of spectral ${ k}_{1}^{- 1} $ scaling, is also seen to be non-universal, consistent with the non-universality of ${A}_{1} $. These observations are to be contrasted with the universal value of ${A}_{1} $ (along with the universal scaling exponent of −1) reported in the literature on zero-pressure-gradient turbulent boundary layers. Theoretical arguments based on dimensional analysis indicate that the presence of a streamwise pressure gradient in sink-flow turbulent boundary layers makes the coefficient ${A}_{1} $ non-universal while leaving the scaling exponent −1 unaffected. This effect of the pressure gradient on the streamwise spectra, as discussed in the present study (experiments as well as theory), is consistent with other recent studies in the literature that are focused on the structural aspects of turbulent boundary layer flows in pressure gradients (Harun et al., J. Fluid Mech., vol. 715, 2013, pp. 477–498); the present paper establishes the link between these two. The variability of ${A}_{1} $ accommodated in the present framework serves to clarify the ideas of universality of the ${ k}_{1}^{- 1} $ scaling.

Sign in / Sign up

Export Citation Format

Share Document