Estimation of Fatigue Damage for an Austenitic Stainless Steel (SUS304) Using Magnetic Methods

2007 ◽  
Author(s):  
M. Oka ◽  
T. Yakushiji ◽  
Y. Tsuchida ◽  
M. Enokizono
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Fatigue Damage ◽  
Magnetic Methods

Damage Assessment on Low Cycle Fatigue Properties of Cyclic Pre-Strained Austenitic Stainless Steel

2011 ◽  
Author(s):  
Nao Fujimura ◽  
Hiroyuki Oguma ◽  
Takashi Nakamura
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Fatigue Damage ◽  
Low Cycle Fatigue ◽  
Strain Ratio ◽  
Fatigue Properties ◽  
Cycle Fatigue ◽  
Damage Law ◽  
Number Of Cycles

The effects of cyclic pre-strain on low cycle fatigue properties of austenitic stainless steel were investigated, and the fatigue damage was assessed based on several parameters such as the full width at half maximum (FWHM) of diffracted X-ray profile and surface roughness of specimens. The strain-controlled tests were conducted under strain ratio Rε = −1 and various constant total strain ranges. Also the change in remnant fatigue lives were investigated when the cyclic pre-strain were applied to the specimens under the different number of cycles which were determined with reference to the usage factor UFpre ranged from 0.2 to 0.8. As a result, the remnant fatigue life of the pre-strained samples became shorter than that of the sample without pre-strain as the UFpre increased. The relationship between the pre-strain damage expressed in UFpre and the remnant fatigue damage in UFpost was roughly described by the cumulative linear damage law: UFpre + UFpost = 1. Namely, the cyclic pre-strain affected the remnant fatigue lives. In order to evaluate the effects of cyclic pre-strain on fatigue lives more precisely, the damage in the cyclic pre-straining processes was estimated by using FWHM and surface roughness. The FWHM of the specimens with pre-strain once decreased with increase in UFpre, and then increased after showing a minimum value. The surface roughness of specimens increased linearly with an increase of the number of pre-straining cycles. These results suggested that the damage due to pre-strain can be assessed by means of FWHM and surface roughness of specimens.

A Perspective on Fatigue Damage by Decoupling LCF and HCF Loads in a Type 316LN Stainless Steel

2015 ◽  
Vol 34 (5) ◽  
Author(s):  
Aritra Sarkar ◽  
A. Nagesha ◽  
R. Sandhya ◽  
M.D. Mathew
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Fatigue Damage ◽  
Strain Amplitude ◽  
High Cycle Fatigue ◽  
Low Cycle Fatigue ◽  
Applied Strain ◽  
Cycle Fatigue ◽  
316Ln Stainless Steel ◽  
Type 316Ln Stainless Steel

AbstractPrior low cycle fatigue (LCF) deformation in a 316LN austenitic stainless steel reduced the remnant high cycle fatigue (HCF) life as a function of the amount of LCF exposure and the applied strain amplitude. A critical LCF pre-damage was found necessary for an effective LCF-HCF interaction to take place.

Sign in / Sign up

Export Citation Format

Share Document