Roughness and pore structure control of ordered mesoporous silica films for the enhancement of electrical properties

2007 ◽  
Vol 101 (2) ◽  
pp. 024109 ◽  
Author(s):  
Sang-Bae Jung ◽  
Tae-Jung Ha ◽  
Hyung-Ho Park
2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Tae-Jung Ha ◽  
Hyeon-Gyoon Im ◽  
Seok-Jin Yoon ◽  
Ho Won Jang ◽  
Hyung-Ho Park

Materials with nanosized and well-arranged pores have been researched actively in order to be applied to new technology fields. Especially, mesoporous material containing various pore structures is expected to have different pore structure. To form a mixed pore structure, ordered mesoporous silica films were prepared with a mixture of surfactant; Brij-76 and P-123 block copolymer. In mixed surfactant system, mixed pore structure was observed in the region of P-123/(Brij-76 + P-123) with about 50.0 wt.% while a single pore structure was observed in regions which have large difference in ratio between Brij-76 and P-123 through the X-ray diffraction analysis. Regardless of surfactant ratio, porosity was retained almost the same. It is expected that ordered mesoporous silica film with mixed pore structure can be one of the new materials which has distinctive properties.


2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
John B. Lowe ◽  
Richard T. Baker

Ordered mesoporous silica materials are of interest for a wide range of applications. In many of these, elevated temperatures are used either in the preparation of the material or during its use. Therefore, an understanding of the effect of high temperature treatments on these materials is desirable. In this work, a detailed structural study is performed on silicas with three representative pore structures: a 2-D hexagonal pore arrangement (SBA-15), a continuous 3D cubic bimodal pore structure (KIT-6), and a 3D large cage pore structure (FDU-12). Each silica is studied as prepared and after treatment at a series of temperatures between 300 and 900°C. Pore structures are imaged using Transmission Electron Microscopy. This technique is used in conjunction with Small-Angle X-ray Diffraction, gas physisorption, and29Si solid state Nuclear Magnetic Resonance. Using these techniques, the pore size distributions, the unit cell dimensions of the mesoporous structures, and the relative occupancy of the distinct chemical environments of Si within them are cross correlated for the three silicas and their evolution with treatment temperature is elucidated. The physical and chemical properties before, during, and after collapse of these structures at high temperatures are described as are the differences in behavior between the three silica structures.


2014 ◽  
Vol 3 (3) ◽  
pp. 183-190 ◽  
Author(s):  
Parvin Sharifi ◽  
Benedetta Marmiroli ◽  
Barbara Sartori ◽  
Fernando Cacho-Nerin ◽  
Jozef Keckes ◽  
...  

2009 ◽  
Vol 42 (12) ◽  
pp. 125404 ◽  
Author(s):  
Sangwoo Shin ◽  
Tae-Jung Ha ◽  
Hyung-Ho Park ◽  
Hyung Hee Cho

2012 ◽  
Vol 124 (9) ◽  
pp. 2215-2219 ◽  
Author(s):  
Zhaogang Teng ◽  
Gengfeng Zheng ◽  
Yuqian Dou ◽  
Wei Li ◽  
Chung-Yuan Mou ◽  
...  

2015 ◽  
Vol 17 (6) ◽  
pp. 4763-4770 ◽  
Author(s):  
Calum Robertson ◽  
Richard Beanland ◽  
Stuart A. Boden ◽  
Andrew L. Hector ◽  
Reza J. Kashtiban ◽  
...  

Thin mesoporous films are demonstrated with pores oriented perpendicular to a titanium nitride growth surface.


Sign in / Sign up

Export Citation Format

Share Document